Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

The construction of an identity among lesbian women during 1950-­?1965 is in focus in this master ?s thesis. My starting point is that identity, such as lesbian or any other identity, is formed in relation to other people and groups, as well as society. This thesis will also examine how lesbian women met and formed bonds with like-­minded, and whether these aspects changed, during the defined time period. The empirics is made up by letters written by women to Riksfo?rbundet fo?r sexuellt likabera?ttigande (a Swedish organisation for lesbian and gays) as well as an interview with two lesbian women who were born in 1938 and 1940.

Landskrona är en liten stad i södra Sverige. Den är en av landets äldsta och historiskt sett mest betydelsefulla städer med sin storhetstid under 1700- och 1800-talen, då ett skeppsvarv växte sig stort. De flesta människor som kom till Landskrona under den här tiden kom för att arbeta på varvet. På grund av det ökade antalet invånare fanns det bostadsbrist i staden och arbetarnas behov av bostäder ledde till stora byggnadsprojekt. På 1900-talet gick varvet i konkurs, arbetslösheten steg och det ledde till en minskning av antalet invånare.

Syftet med denna studie är att ta reda på hur medvetna gymnasieelever är om it-säkerhetshot och risker på Internet. Detta har gjorts genom att först undersöka aktuella hot genom att studera trendrapporter från ledande it-säkerhetsföretag. Denna information har sedan använts i en enkät för att ta reda på kunskapen och medvetenhetsnivån om dessa it-säkerhetshot bland gymnasieelever i Uppsala. Studien visar att det finns ett behov av utökad kunskap inom området. I resultatet kunde särskilda brister ses i de sociala aspekterna av it-säkerhet.

Byggsektorn står för en stor del av det totala avfallet i Sverige och står därmed inför stora miljöutmaningar. Däribland finns NCC Construction Sverige (nedan kallat NCC), Sveriges tredje största byggföretag med cirka 10 000 anställda. På varje bygg- eller anläggningsarbetsplats på NCC upprättas en miljöplan där olika krav omhändertas: lagkrav, lokala föreskrifter, beställarkrav samt interna krav.Studien genomfördes i samband med författarens praktik på NCC i Göteborg, avdelning Anläggning, med syftet att synliggöra yrkesarbetare, arbetsledare och platschefers syn på miljöarbetet på företaget - idag och historiskt. Totalt genomfördes 8 anonyma personintervjuer; två platschefer, två arbetsledare och fyra yrkesarbetare intervjuades under hösten 2014.Studien visade att ekonomiska incitament är viktiga för att miljöarbetet ska kännas berättigat för dem som utför det - framför allt för skeptikerna. Pappersbördan är hög och vissa anser att miljöarbetet enbart är en pappersprodukt utan egentlig mening.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The purpose of the thesis Masculinities ? Gender and its Impact on the Social conditions of individuals is to perform a critical study of how gendered norms influence the social conditions of individuals. This has been done by a problematization and the attempt to answer the question of how the hegemonical masculinity can be analyzed as a discourse, and how the structural aspects of this discourse inflict on the social conditions of masculinities.The question was divided into the analytical themes: the boarders of the discourse, the institutionalization of the discourse, the actuation of the discourse and the agents of the discourse. The theoretical frame is constituted by the theory of discourse by Michel Foucault, the theory of the hegemonical masculinity by R.W. Connell and a subversive identity theory by Judith Butler.

This degree project has been performed along with Classic Garden in Gothenburg andBallongfirman Far & Flyg in Stockholm. Together we have developed a sun- wind- andrain protection. The protection is permanently assembled and mainly intended for publicenvironments as restaurants and outdoor cafés.The design on the sun protection was already done so our task has been to develop theconstruction and to build a prototype in scale 1:4 and one in scale 1:1. The look of thesun protection is approximately as the name implies, equal an igloo. The lamellae aregoing to fold out in different steps all the way down to the ground and the both sides willbe independently of each other.The first stage in the project was to develop differently principle proposal on how thefunction will work when folding in and out the protection.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket.

This project has been created with the assistance of Fredells. Fredells is a Stockholm based company with a focus on the retail of building products. Fredells also produces prefab- or prefabricated products which are either completely or partially ready for assembly the moment they arrive to the building site. These prefab-products are primarily delivered to customers within the Stockholm region. The building industry is a conservative market where the incentive to changes has been relatively low compared to other industries.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

The purpose of this thesis is to study whether there is a demand for sawn wood products of large dimensions and planed goods among Wallnäs AB:s customers. The thesis consist of two main parts, one survey among Wallnäs present customers and another one which purpose is to increase Wallnäs customer base. Finally there is a chapter that describes what properties the raw material has to have in order to produce the demanded products. The survey to the present customers was conducted through a questioner. A sample of those who stated an interest for either sawn wood products of large dimensions or planed goods, were later contacted for a telephone interview. To reach out to new customers, relevant companies has been identified through the Swedish Trade Councils data base and through the member list of the Timber Trade Federation.