This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

A prerequisite of an international exchange of information is multilingual tools for information retrieval, such as the multilingual thesaurus. There is an ongoing discussion about the construction of, and the guidelines for, multilingual thesauri. In recent years the praxis as defined in ISO 5964 Guidelines for the establishment and development of multilingual thesauri 1985 has been the topic of a scientific discussion. It has been about how equivalence across languages is to be established when it comes to concepts, terms and relational structures. This masters thesis treats the praxis and practice of multilingual thesaurus construction.

Over the next few years, major investments in healthcare buildings is to be performed. Most surgical theaters are in need of technological upgrades as the technology is outdated. In most cases not only a refurbishment is performed but also an expansion. The basis for expansion, is due to a large increased number of patients, but also to the complexity of the refitment. Partly it's because evacuations are difficult to implement and the disturbance that occurs in conjunction with the refitment.Löwenströmska hospital undergoing a technical upgrad.

Requirements Engineering processen, RE-processen, är den tidiga fasen i ett systemutvecklingsprojekt, där RE-processens syfte är att identifiera, verifiera, validera samt dokumentera en mängd krav som ett nytt eller utvidgat system skall konstrueras efter. RE-processen skall mynna ut i en kravspecifikation där de dokumenterade kraven finns samlade.Detta examensarbete behandlar ämnet systemutveckling och fokuserar på konsultföretags metodanvändande under RE-processen. Att fokus ligger på RE-processen beror på att denna fas är den mest kritiska delen i ett systemutvecklingsprojekt.För att få svar på vilka metoder som konsultföretag använder under RE-processen har en intervjundersökning gjorts.Resultatet av undersökningen visar att konsultföretag använder olika metoder under RE-processen. Sättet att använda dem fungerar på ungefär samma sätt med ett aktivt deltagande från kundernas sida. Systemutvecklingsmetoderna är också uppbyggda på liknande sätt med samma synsätt att arbeta efter..

Stockholm är en växande stad och för att bemöta det behov av bostäder som expansionen medför, krävs att befintliga fastigheter utvecklas och får nya, bättre anpassade ändamål. Det är framförallt viktigt att utveckla de fastigheter som är belägna i attraktiva områden med pågående stadsutveckling eller goda möjligheter för ny stadsutveckling.Denna rapport behandlar utvecklingen av Vandenbergh 9, ett kontorskomplex från tidigt 1970-tal till ett modernt bostadshus. Rapporten resulterar i förslagshandlingar över hur den invändiga gestaltningen kan komma att se ut. Förslaget följer alla de lagar, stadgar och rekommendationer som idag ställs för byggnation i Sverige.Detta resulterade i sex individuella plan, men för att främja hållbart och rationellt byggande har ett stort fokus lagts på modulbyggande. Rapporten redogör för hur en fastighet i en stor skala kan utvecklas och erhålla ett nytt syfte..

Construction projects are organized in different shapes and disturbances in the information flow in these processes can lead to problems, such as delays and/or a lower quality. Therefore, a well-functioning interaction between actors and a well thought out-communication at an early stage is of crucial importance. The main question is "How does the communication of decision and information flow in the building process and what barriers and opportunities can be observed?". This diploma work has been written with guidance from Bjerking AB and to answer this question, a collection of empirical data conducted via semi-structured interviews.

This report will try to evaluate the use of rented concrete casting moulds, which are used to build walls and system of joists. The evaluation is only examining the economical aspects.The cost of using concrete casting moulds is a big part of the total production expenses. Therefore it is important that the calculated price not exceeds the final costs of the casting moulds. The calculated price is the price used in the process of making an offer.The evaluation consists of a comparison of the calculated price and the final costs for three building projects. It also evaluates the exploitation of the concrete casting moulds for each project.The report is made by Sven Gynne and Anders Alexandersson at School of Engineering, Jonkoping University, in cooperation with PEAB Jonkoping.

This paper is written as an examination paper at the University of Jönköping. The subject is chosen by Peab Sweden in Jönköping with whom further cooperation has been hold. The aim is to compare building methods and building materials in Sweden, Finland and Germany for further inspiration for Peab?s own market.BackgroundThe development of the construction industry develops new materials and methods to the market which has been forced by shorter construction times and the environment aspect. To pursue the development, further knowledge exchange should exist between the countries.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Low- performing pupils at the construction programme.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

Vid produktutveckling inom industriföretag finns idag luckor vad gäller IT-stöd i arbetets olika faser. Införandet av s.k. RBE-system (Rule Based Engineering) är ett steg på vägen mot att försöka fylla dessa luckor. Meningen med ett RBE-system kan sägas vara att ersätta traditionella konstruktionshandböcker med motsvarande konstruktionsanvisningar i digital form. Detta ger möjligheter till automatisering av processer som är tidskrävande, monotona och ofta förekommande, t.ex.