To challenge the competition within the construction business there are requirements ineffectiveness and use of operating computer based programs and work-methods. Thecomputer based programs are continuously improved and can at some point be the start of anew work-method. The work-method of tomorrow can be Building Information Modeling(BIM).This Master of Science Thesis gives an understanding in what BIM is and what therequirements for Sweco Theorells are in a future BIM-use as a consulting-firm. Theunderstanding is presented through a study of theory within the subject. The way of thinkingand acting among different disciplines and individuals within the building process isexplained through an interview study.The term BIM is regularly used.

According to recent statistics the construction industry is responsible for the largest waste discharges of both dangerous and non-dangerous waste, when disregarding the "non-dangerous" amount of granite waste produced by the mining industry and the waste produced by the pulp and paper industry. Preventive work within waste management is an ongoing practice so to be able to reduce negative environmental effects. One of the most common actions for the companies to take is to separate the different kinds of waste from one another at the construction site. Although by working with the problem in earlier stages of the process a large amount of the waste could already have been reduced.Companies in the construction business that are actively working to decrease environmental impact in their operations often use an EMS (Environmental Management System). By using environmental management as method the company can manage their environmental work so that actions can be taken where they are needed the most.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

The author has, with the help of AK Consultancy Indoor Air AB, formed a series of questions regarding moisture problems in buildings and how these are handled in extreme climates with high temperatures and a high relative humidity. Furthermore to analyse and indentify key material that makes a construction safe against moisture problems. Ventilation, AC and the choice of materials have in a later stage of the thesis been investigated to enhance the knowledge of moisture protection. The research for this report includes measurements on existing buildings, calculation models on the building envelope for analyses and the ingoing materials of the envelope. The health aspect of moisture problems related to ?sick building syndrome? has been included and interviews have been conducted to gather relevant information.A study of the American system, ASHRAE, American Society of Heating, Refrigeration and Air Conditioning Engineers and the standards used in Singapore has been made to highlight the difference.

This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

Low- performing pupils at the construction programme.

This report is about how to decide which method is the most suitable as floor covering at projectKlammerdamm in the centre of Halmstad. The covering has to be fire resistant and soundproof inorder to protect the wood structure and stop noise from traveling between apartments. There aretwo possibilities either traditional gypsum board or gypsum-based self leveling underlayment.The roads around the construction site are narrow. A regular twenty-five meter long truck has nopossibility to reach the site. The construction site is small and the storage area is limited.

The projecting time in the construction industry needs to become more efficient toshorten the amount of time it takes to project a build. One of the North's leadingconstruction company NCC constuction Sweden AB has developed a form ofcollaboration called ?NCC project studio? that they use in some projects today.My thesis consists in bringing forth the most important aspects of the collaborationform called NCC project studio. The point of this is to use my thesis to help thecompany develop a quality document that can assist them when starting collaborationbased on NCC project studio in the future.The conclusion of my thesis was that much of the focus needs to be on explaining tothe participants what NCC is aiming to gain from working with the NCC projectstudio and also which important parts that needs to be worked on..

This essay examines the differences and similarities, weaknesses and strengths of the two Cognitive Semantic theories Conceptual Metaphor Theory and Principled Polysemy Approach to Meaning Analysis. To illustrate the two theories, the Swedish verb-particle construction "gå upp" is examined and analyzed accordingly. The results showed differences in the number of polysemous meaning found. The methodological evaluation showed that the differences in the underlying ideas concerning meaning-construction behind these two theories make them incompatible..

AbstractBackground: The factors goals, emotions and motivation are nowadays well researched. Studies that shows the interaction between these three factors does exist, but in a small amount. In all different jobs people encounter these factors, no matter what you?re working with, some experience them daily and others only sometimes.Purpose: We want to study the significance of the interaction between goals and emotions among employees in the construction business, when leaders are about to motivate their employees.Implementation: To succeed with our study and achieve the purpose, we chose to do a qualitative research. We have conducted four visiting interviews and one telephone interview, with both leaders and employees in the construction business.Results: We have through our study found out that the interaction between goals, emotions and motivation are important in the work of construction, even if it?s not something everyone thinks about.