Projects is the most common work model within the cultural area, but what is a cultural project? The definition of cultural projects is ambiguous. There are also no compiled information about what it means for culture to be pursued in project form. Scientific research about traditional project management and success criterias are wide-ranging. So is the scientific research about cultural studies and cultural policy.

SAAB Aerotech division FGR in Arboga builds and develops equipment and components used in both military and civilian applications. To build a test system for a specific project that SAAB is responsible for requires a simple signal generator that can provide a pulse modulated signal. The need to buy a new advanced signal generator for example from Agilent is not as profitable as the instrument is expensive and contains features that SAAB does not require in their applications and test systems. That was the reason why SAAB offers two students a thesis where the goal is to construct a signal generator in accordance with what SAAB requests.This thesis contains several different phases. The first step was a meeting with our supervisor Mats Bergman and by reading the data sheets for components to be used in the project, with these information and specifications that we have received from SAAB we started to construct the signal generator.What we did during the construction work was to simulate and draw a schematic to be able to design the circuit board.

How do you reed a book? Do you start at the beginning,or do you begin with the end or maybe in the middle? Inmy exam project I elected to work with a photographicpublication about fragments of pictures combined in differentways, changing the context of the photographs andmaking the reader search for the whole picture, literary.During the project I tried to create a method for foldingwhich would make the pictures communicate differentlydepending on how they where stacked against each other.I wanted to explore new ways to read the photo book, andhow the format could be transformed by folding, to beable to show the pictures in a larger scale. Working withthe material from an earlier project about defragmentation,I wanted to create a book that would correspond tothis and figure out how it would work..

For a long time I have felt that there is a lack of time planning productson the market that attracts me to use them. Therefore I wantedto explore the possibilities of developing something that I reallywanted to use.At first I tried to come up with a more general tool for planningand structuring time, different from the products that are alreadyavailable. But soon I found it more interesting to see myself as theprimary user. This way I felt that I could experiment more and Ididn?t have to take things like production, cost and possible targetgroups into consideration.As I set out with an aim to try and understand my own problemswith planning and structuring time the project became a very personalone.

How does the weather protection systems look like today, and how will they be developed in the future? These are questions that we have worked with during this project. At the start of our report there?s a summary of the leading weather protection manufacturers in Sweden. We have explained how these systems are constructed and how they work.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

I did my degree project together with Universeum AB. The project had the work title: children?s world and the aim were to give children between 3-8 years old a place that was especially made for them. With their interests and needs in mind the area should trigger play but also learning through a well planned pedagogical environment.I did this project because I thought this was an excellent opportunity to really practise my new gained skills I had learned during my two years in CCD (Child Culture Design). It also gave me the opportunity to actually see how well my knowledge was working when it was put to the test, and I did learn a lot from this.Together with a crew of 6 people I developed and designed the area.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

This report has been performed for WSP Construction Design located at Arenavägen 7 in Stockholm. WSP Construction Design is one of the leading departments in Sweden in construction solutions regarding everything from building construction to industrial building. Great competencies regarding steel, wood and concrete constructions are available within the department which is well sought.Crane girders used in the industry are exposed to large loads that vary over time that includes instantaneous lifts and the crane girders movement which lead to the phenomenon fatigue in the crane girder and its ingoing welds. A control of fatigue needs to be performed after a certain lifespan measured in time which in turn is converted to a number of loadcycles. When the number of loadcycles amounts to a greater number the input welds resistance will have been reduced and the rate of utilization thereby increased.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.