Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

At the moment in central Täby there are small district heating network operated by Fortum Heat. The distribution network has an annual heat demand of about 70 GWh, which is supported by the network's two plants, Galten and Farmen. Täby as a region is rapidly growing and there are grand plans to develop the area. Estimated market potential for a future district heating expansion in Täby is very high and as early as in 2007 Täby decided to invest in a large-scale expansion. In autumn 2009 Täby did a procurement process, known as the ?Täby initiative?, to find a partner that could implement those expansion plans. To secure a cheap basic production the partner also need to build a power plant at Hagby recycling center. Despite high interest during initial state of the process, only one procurement offer were received and Täby suspended the contract in March the following year.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Syfte: Undersöka den kriterierelaterade validiteten, mellanbedömarreliabiliteten och användarvänligheten för MEONF, ett screeninginstrument för bedömning av risk för undernäring. Metoder: Hundra patienter inkluderades och nutritionsstatus bedömdes med Mini Nutritional Assessment (MNA) som här anses vara golden standard samt screenades med Malnutrition Universal Screening Tool (MUST) och Minimal Eating Observation and Nutrition Form (MEONF). Resultat: Sjuksköterskorna ansåg MEONFs instruktioner och frågor lätta att förstå, svara på (100 %) samt att frågorna var angelägna (98 %). Instrumentet hade acceptabel sensitivitet (0.83) och specificitet (0.78) jämfört med MNA. Sensitiviteten var högre än den som fanns mellan MUST och MNA (0.57).

The aim of this paper is to examine how the press describes the public and private role of the Swedish monarch in texts that report about the biography Carl XVI Gustaf ? den motvillige monarken (Sjöberg et al. 2010) when it is published in November 2010. The examined period ranges between the days just before the release and a fortnight after. The analysis is limited to standard Swedish papers: a daily, Svenska Dagbladet, and an evening paper, Expressen.Questions asked in the study are: In what ways do the analysed texts raise a discussion about the monarchy?s importance or function in the society of today, that is a public debate on the monarchy? To what extension are status symbols used in the constructing of royalty, that is what Jürgen Habermas (2003) describes as representative publicity? What similarities and differences are found when comparing the news articles in the daily and in the evening paper?The method used to answer the aim and questions is the critical discourse analysis, as Norman Fairclough (1995) describes it, and the theoretical perspective of the essay is Jürgen Habermas? (2003) theory about the bourgeois public sphere.The result shows that the news articles in the daily unsurprisingly construct only a public who wants to debate on the monarchy.

The main purpose of this study is to examine differences and similarities concerning teamwork and interactive skills among preschool children while they interact with an Ipad respective a number of selected traditional artifacts. The traditional artifacts chosen for this study are small Lego blocks, JovoToys (click and construct system) and large puzzles. The study takes its starting point on the basis of both a social- and a learning perspective when different groups of preschool children in the ages from three to five years interact in fellowship groups with respective artifact. Primarily the main focus is to examine differences and similarities that appear from without the social perspective.The overall objective is to identify what eventual differences and similarities can be found purposely on both what is happening in the social interaction between the preschool children themselves but also what is taking place in the interaction between the children and each artifact. This study will also via theoretical frameworks create an understanding why eventual differences and similarities exist.The results are based on both a literature review and a field study.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

Title: How to Construct the Perfect Scandal ? a study of the news reported by Expressen concerning the SD-scandalAuthor: Linnea IvarssonThis C-paper presents the incident concerning the political party Sverigedemokraterna in Expressen in November 2012. The newspaper was the main source of the news reporting with the mobile phone camera film from the occurance and led the way of the news reporting in Sweden about three party members.The paper investigates how the story telling of the so called SD-scandal was constructed, using Critical Discourse Analysis as the analysis method combined with selected parts from the analysis method of critical linguistics. The theories that have been used to establish the results of the analysis are Critical Discourse as a theory based on Norman Fairclough and Teun A. van Dijks theoretical keystones combined with Sigurd Allerns and Ester Pollacks theories and schematic point of view on the constructions of political scandals in media.With the theories and analysis methods above mentioned the results turned out to confirm the theory about how political scandals in media are constructed and designed with certain strategies and agenda.

The understanding of the role of nature for rehabilitation of both physical and psychological afflictions has greatly increased in the last few years. There?s a lot of science that describes the healing effects of nature. The rehabilitation garden in Alnarp has contributed with very positive results from the treatments of patients with burnout syndrome. In the first stages of rehabilitation, the need for calm is very important and a demand-less and stress-free environment is of essence.

A paranoid and shameful reading of Inger Christensens novel Azorno.The contagious feelings of paranoia and shame played a vital part in my first reading of the novel Azorno, written by the Danish poet Inger Christensen. In this essay, I?m letting those emotions direct the ?understanding? and analysis of the novel. In earlier research the focus has been to comprehend what the novel ?really is about?, and even though it has been mentioned that the form probably is a way to make the reader a visible constructer of  the novel?s ?meaning? the understanding has never been created by the affects that occurs during the reading.

One of the environmental problems today in seas, lakes and streams is eutrophication. This is often caused by nutrients such as phosphorus (P) and nitrogen (N) that leak from agricultural areas. A measure to partly prevent the nutrient discharge is to construct or restore wetlands.In order to control the efficiency of nutrient reduction of existing wetlands in the county, the administrative board in Västra Götaland wants to find different criterias for reference wetlands. These reference wetlands should represent other wetlands and be used in future evaluations of reduction of nutrients and design of constructed wetlands. According to the administrative board in Västra Götaland the reference wetlands should have a catchment area of about 50 hectare consisting of at least 70 % arable land, to represent wetlands created to remove nutrients.

SummaryIt is inspiring to see museum visitors evolve and develop through art exhibitions. Great potential lay in facilitating the learning experience by art exhibitions, and the possibility of designing exhibitions that make visitors attracted to learn. The purpose of the present work is to study the means of creating favorable conditions for lifelong and enjoyable learning in art exhibitions. The concept of learning has multiple definitions, and several have been used effectively in various ways in preceding works. The underlying principle of this work is that visitors learn by actively processing information in their own minds and through experiences. The term lifelong learning is often associated with employability and adaptability.

To understand and explain how the borderland between civil and corporate societies areconstructed and reproduced in the organisations subjectivity. I want to study the navigationsand interpretations of the different actors in the field in an explorative manner.? How do the leaders of the organisations interpret governing and strategic management? Whatconcepts are used? How is the leadership constructed?How do they discuss the demands of management and structure coming from outside theorganisations? How are the organisations shaped by accountability and normative conceptions of leadership?What is their view on the demands coming from within the organisations? What role does thedemocratic governance body have in relation to the employees and the management?What is their view on employment, relations with trade unions and employer associations andthe managerial position of the organisations?The Swedish context with strong emphasis on membership and democratic rights for themembers and volunteers has not gained a large impact on the international researchconcerning non-profit management. Instead the service delivering organisations working withgovernment contract and hired recruiters and volunteer management is in focus. This makes ita very interesting area of research.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

The role of religion, of religious individuals and organizations, is currently discussed within both a private and public sector of development. I have viewed documents from the World Bank and DFID where the religious presence is a growing fact and previous theories that religion would disappear with economic development have been abandoned. As a result DFID conducted a large study on the importance of religion for development work, RaD 2005-2011, under the directions of Professor Carole Rakodi. Rakodi (2011) concluded that religion was highly related to the success or failure of developmental projects, and to understand the values people had religion needed to be understood within its specific cultural context. She developed an analysis model to conduct this work.