This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

With background in the acknowledgement of the current period of major change in the characteristics of traditional Swedish foreign policy, considering the membership in the European Union, as well as the new contextual scenarios that Sweden has been situated in after the end of the cold war, this thesis aims at scrutinizing the Swedish Foreign Policy from 1991 to 2010. The purpose of the thesis is further to localize continuity and change in the ideas which Sweden has explicitly stated in its foreign policy. Based on the theory of institutionalism, the thesis also aims to bring forward plausible explanations built on the main empirical findings. This has been done by identifying different types of goals and means within realism and liberalism as well as categorizing each theory within three ideal types.The chosen research method has been a qualitative text analysis with focus on an ideational analysis. The material on which the descriptive analysis is based upon is constituted by the annual statements of government policy in parliamentary debates on foreign affairs.The results of the thesis show that the ideas that are related to solidarity, consensus and active foreign policy are constant through the period of examination.

The purose of the study is to increase knowledge regarding systematic enviromentarl work in an organization that works with road services. Work on the road is done in a hazardous environment with constant danger regarding the life of the individual. The site of the work varies in accordance with where the needs ae . This requires skilled workers capable of working independently and that they are experienced din doing their own risk assessments in accordance with the individual believes that the situation calls for work to be performed safely. The study was conducted with a qualitative research approach in which four employees of different positions, knowledge, experience and vision to work in a hazardous environment were interviewed. The focus rests on the organization, management, and individual aspirations for a safe and secure working environment. The study adds weight to the relationship between the purchaser of the work and the organization as a prime contractor due to the compexity of the organization.

The object of this master thesis was to examine the significance of fairy tales for children and the extent which children today are able to share fairy tales through the activity of the libraries. The main question was: how current were fairy tales at the investigated libraries activity for children and how current were fairy tales in todays book publication? The qualitative methods used were in the form of interviews, statistics and source studies. The theoretical literature in this thesis described the folkloristic context of the fairy tales. There was also a psychological and a pedagogical view of the possibility of the fairy tales.

The largest project at the AICG lab at Linköping University, Cognitive models for virtual characters, focuses on creating an agent architecture for intelligent, virtual characters. The goal is to create an agent that acts naturally and gives a realistic user experience. The purpose of this thesis is to develop and implement an appropriate learning model that fits the existing agent architecture using an agile project methodology. The model developed can be seen as an online unsupervised reinforcement learning model that enhances experiences through reward. The model is based on Maes model where new effects are created depending on whether the agent is fulfilling its goals or not.The model we have developed is based on constant monitoring of the system.

Inertia is often described as an unavoidable state that organisations reach when they grow to a certain size. Theorists present a number of different phenomenons, which together create the foundation for inertia. This study deals with the apparent resistance that appears among the large Nordic betting companies with regards to establishment on the electronic sports (eSports) market. The analysis is based on how the old phenomenon inertia takes place in young and seemingly flexible industries. This area has received limited coverage in current theory on inertia.

The current study sought to examine if post-produced semantic memory cues are a good aid for memory recall. It also focused on remembering units with a meaning, instead of just remembering lists of words. In the current study a factual text was used where the participants were tasked with recalling as much information as possible either with the aid of cues (keywords written by the participants themselfs), computer with Internet or no aids at all. The results showed that keywords are significantly better for memory recall. The results were discussed in regards to modern models describing semantic memory.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

Arcoma is a company that develops and manufactures X-ray equipment for hospitals. One of the most crucial components is the digital detector. Due to the high cost it is made removable so it could be transferred and used in other X-ray apparatus. The detector is placed in a so called detector holder. The current detector has a rectangular shape which sometimes requires a 90 degree rotation to match the shape of the patient.

Studien går ut på att jämföra tre olika styrsystem för ventilation, nämligen CAV (Constant Air Ventilation), VAV (Variabel Air Ventilation) och DCV (Demand Controlled Ventilation). Dessa styrsystem ställs mot varandra i tre olika lokaltyper, med syfte att identifiera det mest energieffektiva styrsystemet. Ett syftet med studien är också att upptäcka vid vilka flöden det lönar sig att arbeta med VAV- och DCV-styrsystemen..

Denna rapport är ett examensarbete på C-nivå som görs i sammarbete med teknikkonsulten Ramböll. Det vanligaste sättet att ventilera en byggnad idag är med så kallad CAV-ventilation (Constant Air Volume). Denna metod bygger på att ett luftflöde bestäms för rummet och upprätthålls med konstant flöde. En annan metod är så kallad VAV (Variable Air Volume) som bygger på att flödet varierar efter behovet. Anledningen till varför man väljer VAV istället för CAV är att med CAV finns det ofta en stor risk att man överventilerar ett rum eller byggnad, just på grund av att flödet är konstant. Problemet med VAV är att det är en högre investeringskostnad än för CAV så metoden lämpar sig bara där energibesparingen är så stor så den täcker mellanskillnaden i pris.

Quality is the key to a well executed product or service. The construction industry hasn?t highlighted the quality in recent times which have contributed to the construction industry receiving much criticism in the field. The public sees it as an offhanded industry where errors and delays are common.The reason for this is considered to be primarily the lack of time, constant pressure to reduce costs and skills and the ability to communicate between the parties about what the correct quality really means. The industry has begun to realize that it must start setting clearer standards and that there are great opportunities for improvement.This report will give Peab an opportunity to develop their quality work.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

The objective of this study has been to examine which significant values are of importance in the telecom sector today, and in a continuing perspective yet to be. To ensure the factors of relevance in the study, we have identified three purposes: - Our first purpose is to clarify the eminent values in the competitive market of the mobile phone operators today, and the reason for its importance.- The second purpose is to understand the function of the brand regarding to value creation and loyalty in the sector of mobile phone operators.- The third purpose is to explore the potential approaches for mobile phone operators to increase value.In this study, our approach has been a qualitative methodology by conducting seven interviews with respondents related to the telecommunication sector.As a result of the process, we find the need to divide the concept of value into two dimensions, which we entitle organizational related values and customer related values. We have found the values related to the characteristics of the market in aspects of its infrastructural features but also in regards to the homogenous core service.Our findings in the empirical data with support to our theoretical frame of reference, is the current highly important organizational related value of constant high result quality (well-functional technological aspect), and the value enhancer by a low price; the strategy of bundling also results in higher value. This result in customer related values that perceives as safeness, availableness and convenience. The brands are a significant source of customer related values with identity value, image value and assuredness. A continued advancement in process quality and individualization will imply greater customer related values of closeness, freedom and flexibility. .