The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.

The aim of this study is to make clear the conception ?Sustainable Urban Development? through an investigation dealing with how the sustainable goals are attained in today?s Swedish urban planning. And also try to clarify where and why sustainable development is failing or lacking. Besides that I have investigated how actors take position towards urban sustainability. The essay is based on a literature study about sustainable urban development and it?s changes through the time and place.

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

In order to understand the human impact on today?s remaining ?virgin? forest and to develop sensible management strategies for future reserves, it is necessary to know how these forests have developed. This knowledge can be gained by using forest history analysis. here are large areas of forests still untouched by modern forestry in the mountainous region in the county of Norrbotten. These forests are highly interesting study objects from an ecological and historical point of view.

Waste appears to be a low-cost fuel compared to biofuel. This Masters thesis was conducted for Vattenfall Utveckling AB and deals with how waste in the fuel affects the performance of a SCR-catalyst. Different mechanisms of deactivation were surveyed, focusing on the poisoning mechanism. A literature study was carried out, which was used as a reference when analysing the results.Small samples (9x2x2 cm, 64 pieces) cut out from a full-scale unused honeycomb catalyst were exposed up to 1500h in two different combustion plants, Johannes in Gävle (co-combustion) and Högdalen in Stockholm (waste-combustion). The activity was measured mainly at 300°C but also at 250, 350, 375 and 400°C.

VAV (Variable Air Volume) system has been studied in a newly constructed office-building. The goal for the study has been to evaluate how the ventilations system work in practice, if adjustments can be made to achieve an more energy efficient system and to evaluate if other alternative ventilation systems is to be preferred in the further.The degree project has been executed at Helenius Engineering Firm who is working with the environment, media systems, HVAC and energy in buildings. The building that has been studied is owned and operated by Akademiska hus.Literature studies, visits at site, inventory, review of system documentation, energy analyses, interviews, key figures, LCC, sand energy- and indoor climate simulations has been made to study the building. Where appropriate some tools from Six Sigma have also been used.How to achieve an energy efficient system and a pleasant indoor climate is studied with human health and well-being as base for the indoor climate requirements. Technical support systems such as ventilation systems have to be designed so that an acceptable indoor climate can be achieved.

This essay examines the using of consensus method for decision making within the World Council of Churches (WCC) and the process that led to the decision to adopt its usage. The main question of my essay is why the method was introduced to the WCC and what motives lay behind its introduction. Other questions are how the consensus method works; both in theory and in practice, and what the predecessors and prototypes for the method are.The consensus method belongs to a broad Christian tradition of spiritual discernment and spiritual decision making. The New Testament, in particular Acts, gives examples of decision making in the early church which show that discerning God's will was considered essential. However the most influential model for the consensus method have been the decision making process of the Religious Society of Friends or Quakers, and also the consensus model of the Uniting Church in Australia.

Extensive planting of the tree species lodgepole pine (Pinus contorta var. latifolia) during the 1970s and 80s has resulted in large areas now being available for commercial thinning. However, the varying quality of the stands creates a problem. The purpose of this study was to investigate, at the Torsby district of the Stora Enso forest company, how well the present computer records of the stands correspond to reality and determine which stands are, from a qualitative perspective, suited for timber production. Finding variables that indicate better stands would give Stora Enso the possibility of selecting qualitative stands which are more profitable to thin. The study included 32 stands containing at least 70 % Pinus contorta.

Bakgrund: Aktieindex används världen över som placeringsalternativ, jämförelsemått inom portföljförvaltning och som underlag för portföljoptimering. Forskare har under senare tid ifrågasatt index viktade efter börsvärdet och alternativa viktningsmetoder för index har framtagits som substitut till det kapitalviktade indexet och prestationsjämförelser har gjorts. Studier har främst gjorts i USA och denna studie ämnar göra en liknande undersökning på den svenska marknaden. Syfte: Syftet med vår studie är att undersöka alternativa viktningsmetoder på det svenska aktieindexet OMXS30 och dess historiska prestation under åren 1995-2011 i förhållande till det traditionellt kapitalviktade OMXS30. Syftet är vidare att analysera de alternativt viktade indexen som grund för portföljoptimering enligt Single-Index Model. Genomförande: Fem alternativt viktade index konstrueras i studien där viktningen grundas på fundamentala värden, Sharpekvoter, standardavvikelse, likaviktning och handelsvolym och jämförs prestationsmässigt mot OMXS30. Indexen används sedan vid portföljoptimering enligt SIM där aktiers och portföljers karakteristika analyseras.

My thesis is a combination of theory and practice, where theory is meant to create a context and a background for my interpretation proposal. I wanted to ?access? the ideas that are always in the background of the reasoning which underlies both planning in a larger scale, and the design of a place. I wanted to make a ?work of ideas.? In the process of shaping the proposal, I wanted to be deleted from the site itself.

The largest project at the AICG lab at Linköping University, Cognitive models for virtual characters, focuses on creating an agent architecture for intelligent, virtual characters. The goal is to create an agent that acts naturally and gives a realistic user experience. The purpose of this thesis is to develop and implement an appropriate learning model that fits the existing agent architecture using an agile project methodology. The model developed can be seen as an online unsupervised reinforcement learning model that enhances experiences through reward. The model is based on Maes model where new effects are created depending on whether the agent is fulfilling its goals or not.The model we have developed is based on constant monitoring of the system.

This paper aims to describe the variation and develop a method to control the production for the product Metropol Kaktus from the snuff developer Fiedler & Lundgren. We are going to use the requirements from the product specifications as limits of the expected quality when we present methods to control the process. One method attempts to control during the process and the other attempts to maximize the number of products with strived quality before the process starts. Metropol Kaktus is a product produced with high quality, the mean weight is 20,023 gram and this is very close to the weight, 20 gram, which is reported in the product specifications. The variation in weight variable is less than what is reported in the specifications and the minimum weight is over the limit set by Livsmedelsverket.

The competition in the milk industry has increased during the last couple of years. This is a result of the trade barrier that dissolved when Sweden entered the European Union. The membership signifies an increased internationalization for the dairies, which has also increased the existence of low price chains in the Swedish food market. The increased share of private brands has strengthened the competitive situation for the manufacturer- owned brands. Three of Sweden?s seven largest dairies have now decided to launch a low price milk to cope with the competitive situation.