Denna rapport är ett examensarbete på C-nivå som görs i sammarbete med teknikkonsulten Ramböll. Det vanligaste sättet att ventilera en byggnad idag är med så kallad CAV-ventilation (Constant Air Volume). Denna metod bygger på att ett luftflöde bestäms för rummet och upprätthålls med konstant flöde. En annan metod är så kallad VAV (Variable Air Volume) som bygger på att flödet varierar efter behovet. Anledningen till varför man väljer VAV istället för CAV är att med CAV finns det ofta en stor risk att man överventilerar ett rum eller byggnad, just på grund av att flödet är konstant. Problemet med VAV är att det är en högre investeringskostnad än för CAV så metoden lämpar sig bara där energibesparingen är så stor så den täcker mellanskillnaden i pris.

Fieldstudys on 22 farms (23 silos) to study relationships between the actual particle size of the maize silage and the theoretical length of cut. The measure of theoretical length of cut were stated by the farmers and not measured by us. Particle size of maize silage was determined using the New Penn State Forage Particle Separator. SLU Skara made a special sieve for us, that had larger holes than de original sieves. The samples were shaken after instructions and then the material was weighted. We have also been taking out samples for microbiological analyses from the silos on 13 of the farms.

Syftet med denna uppsats är att undersöka och utveckla teorier för att undvika detektering vid online pokerspelande med en pokerbot. En bot är ett program som utför en rad operationer inom ett givet regelverk utan att en användare behöver styra eller övervaka programmet. Teorierna skall vara generella nog för att kunna användas för spel på en rad populära online pokerspelsidor. Pokerspelet som uppsatsen avser är Texas Hold?em poker, ett hasardspel som fått stor uppmärksamhet i media på senare år tack vare stora vinstsummor och ett spritt spelande på internet..

Healthy calves are the foundation in order to run a profitable diary production. Being healthy as calf results in a better start in life and good growth is expected to follow. Within dairy production it becomes more common to rear calves in groups and feed them by an automatic milk feeder. The milk feeder enables for the calves in greater extent to ingest milk or milk replacer several times per day and they are also able to perform natural behaviors in greater extent. Group rearing of calves puts higher demands on the animal keepers to localize individual calves in the group pen, showing signs of illness.

The dog has often served as a model animal for humans in scientific studies. This is due to the fact that dogs are susceptible to a wide range of diseases which also affect humans. One example is cancer, a condition that affects dogs as well as owners. Neoplastic diseases account for 18-23 % of all deaths in dogs (Bonnet et al., 2005 and Jagielski et al., 2002). Mammary tumor, or tumor of the breast, is the most common tumor form in intact dogs and women (Im et al., 2013). Mammary tumors originate in the udder, and are classified according to their histological characteristics.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.

This paper describes the work done trying to diminish the noise present in the signal from an IR-detector. The project was aiming towards two different kinds of applications; heat protection and presence detection. The hypothesis was that the signal-noise ratio would decrease if a filter and a proper installation were used for the detector. Some experiments were executed to determine what kind of filter were the most suitable for each application and how these could be installed. After executing the experiments and evaluate the results we recommend to use a specific filter for each application.

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

The project focus on combustion of softwood pellets and pellets in a 40 kW grate fire reactor at TEC-Lab. Dept Applied Physics and Electronics at Umeå University. Experiments were performed at four primary airs to fuel ratios (0.7 to 1.3), where aspects such as temperature profile, levels of gases (CO and NO), sintering-/-slagging and unburned fraction of the ashes were studied. Four different fuel loads were used for wood pellets (10, 20 and 30 kW) and one fuel load for straw (10 kW). Combustion of straw proved very difficult to ignite, and also led to other combustion-related technical problem such as slag formation due to the relatively low melting temperature-/-slag temperature of the straw.

The usage of Unmanned Aerial Vehicles (UAV) for several applications has in-creased during the past years. One of the possible applications are aerial imagecapturing for detection and surveillance purposes. In order to make the captur-ing process more efficient, multiple, cameraequipped UAV:s could fly in a for-mation and as a result cover a larger area. To be able to receive several imagesequences and stitch those together, resulting in a panoramavideo, a softwareapplication has been developed and tested for this purpose.All functionality are developed in the language C++ by using the software li-brary OpenCV. All implementations of different techniques and methods hasbeen done as generic as possible to be able to add functionality in the future.Common methods in computervision and object recognition such as SIFT, SURF and RANSAC have been tested..

Fertility is of central interest in the dairy production but has during the last decades declined. Increased milk yield has resulted in high pressure on the metabolism of the dairy cows that are supposed to manage the transition from dry cows to lactating cows within a few weeks around the parturition. Much indicate that metabolism and fertility are closely linked, with insulin playing a substantial part. There are many studies suggesting that the main part of gestation loss can be found during the early embryo development, a period which can be studied in vitro. The aim of this study was to test the effect of insulin during maturation in vitro and to evaluate two different fluorescent stainings on oocytes and embryos; a nuclear stain and a staining of apoptotic cells through the terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL)-method. Bovine cumulus-oocyte-complexes (n=991) were aspirated from abattoir-derived ovaries.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

One problem in today?s indoor air quality lies within insufficient ventilation. Dynamic ventilation can be obtained by implementing a Demand-Controlled ventilation (DCV) system. DCV systems adjust the ventilation in a building by calculating the impact made by its? occupants.