Svenska Aerogel AB has developed the material Quartzene® which is of the typeprecipitated silica and contains calcium - magnesium silicate ((Ca, Mg) SiO3). Thematerial is used for molecular filtration of contaminated air. Qartzene?, which is inpellet form, is porous and has a high internal surface which is a requirement for themolecular filtration. With the use of various impregnations, filtration can affect thedesired outcome.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas Condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

Denna rapport ingår i ett examensarbete på avancerad nivå inom ämnet produktutveckling.Arbetet innefattar en fallstudie som genomförts vid RTGA, Scania CV AB i Södertälje.Examensarbetet omfattar 30 högskolepoäng och har genomförts av undertecknad,teknologstudent från Mälardalens Högskola vårterminen 2015. Rapporten har upprättats i tvåversioner, en för Scania CV AB respektive en generell version där känslig företagsspecifikinformation har censurerats.I takt med att utvecklingen av motorprestanda fortskrider, med avseende på ökademotoreffekter samt teknikutveckling för emissionsreglering, så ökar också kravet på prestandaför kylsystem som måste klara av att kyla bort högre effekter. Fordonskombinationer medkraftfulla laddluftkylare löper dock stor risk att drabbas av utfälld kondens som fryser till is iladdluftkylaren vid låga omgivningstemperaturer. Isen medför ett tryckfall i laddluftkylarenmed prestandabortfall som följd. Scanias lösning till problematiken är en så kallad kylargardinsom syftar till att reducera kylluftflödet genom laddluftkylaren till den mån att isbildning intesker.

In the urban planning debate of today, two strategies for city development stand out as each other's opposites, urban sprawl and smart growth. This thesis concerns a development project of the latter kind and aims to give an alternative proposal to new buildings and a park in a Swedish city block. The term sprawl is used for new developments on virgin soil on the outskirts of cities leading to a city spreading, while smart growth stand for increased city density through development on re-used land within the city boundaries. The latter are often seen as more sustainable in many levels and are also shown to have positive effects on a number of city functions. At the same time smart growth has negative consequences on other aspects of the city such as public open spaces.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.