Sökresultat:
712 Uppsatser om Concrete walls - Sida 2 av 48
Behuggning av betongytor: ett test av hantverksmetoder
During the latter half of the 18th century, when concrete started seeing general use in
modern cities, the use of different methods to give the concrete a finished surface texture
saw use. One of these was using different methods of mechanically altering the surface using
a slew of cutting and crushing techniques with mallet and chisel. This was done in order to
hide the often dull and gray look of concrete, and allude to other more expensive and
luxurious stones. The work would possibly have been done by experienced stonemasons,
using much of the same techniques and tools they would have used while working natural
stones. Or did they? This essay explores, through the use of traditional handcrafts and tools,
the claim that the working of concrete surfaces can be done with the same tools and skillset
as the working of natural stone.
Kv. Tvättstugan, ett flerbostadshus med massiv trästomme : Ett examensarbete om akustik- och brandkrav samt en jämförelse av energi- och fuktaspekter
Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.
EN TOTALKOSTNADSJÄMFÖRELSE MELLAN CELL-, SKUM- OCH LECA-BETONG
This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.
Metodik för fastställande av bärförmåga på befintliga betongkonstruktioner
Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.
Platsgjutet eller Skalväggar?
I och med det enorma användningsområdet av datorsystem i dagens samhälle finns många typer av användare och uppgifter att designa för. Genom designriktlinjer kan utvecklare få referenser och guidning för att skapa användbara applikationer från början. På så vis kan tid sparas i utvecklingsprocessen. Från och med puberteten då människan kan anses vara vuxen ändras förmåga till andraspråksinlärning, trots detta finns det människor som lär sig andraspråk i vuxen ålder. Kunskap kring vad dessa skillnader beror på måste användas i designen av en andraspråksinlärningsapplikation för att tillgodose människans kognitiva förmågor.
OMBYGGNAD AV TRAFIKPLATS : Ekhagsmotet i Jönköping
We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.
Betong - Förvånansvärt lättflytande!
Concrete is a very common construction material. It´s characteristics are strength, durability and formablility. Superplasticizer is a common admixture, which changes the properties of concrete.
Today (spring 2007) there are no certian mathematical methods to calculate the required percentage of this admixture needed to give the necessary set slump flow in the overall concrete recipe.
Concrete batching companies must therefor experiment with different amount of superplasticizer in order to meet the specified slump and strength.
The purpose og this report is to investigate if any mathematical relation can be established between the amount of superplasticizer used and the slump flow achieved.
After carrying out some practical experiments using four different superplasticizers a direct relationship can be establish between the percentage of admixture used and the slump/flowability achieved. Unfortunatly at present due to the numerous variables, the calculation of mathematical formula can not be achieved..
Stöldskydd
To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.
Utmattning av vägbroar i armerad betong enligt eurokoder
Since 1 January 2010 it is a requirement to use the European standards, Eurocodes, in Sweden when constructing bridges. One chapter that has caused an extra amount of problems for the engineers is the one about fatigue analysis, which resulted in us doing this thesis.To do this we had to read all of the Eurocodes that direct, or indirect deals with fatigue and calculating of such. We have read the background documents for the Eurocodes and master?s thesis in the subject. We also studied the calculations of bridges constructed by different construction firms.We have chosen to limit the thesis to discuss only road bridges made of concrete due to the lack of method for verification of concrete in the national appendix.
Stommaterial för villor - trä eller betong?
We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.
Tillämpad informationsteknologi i klassrummet
This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.
Fuktomlagringar i välisolerade ytterväggar : En undersökning för att fastställa en rimlig inbyggnadsfuktkvoti träreglar med fuktsimuleringsprogrammet Wufi 2D
To save energy it?s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth.
Lek och lärande : En studie av vad lärare och elever associerar ett laborativt arbetssätt i matematik med
During recent years, the trend of Swedish students? negative performance and results in mathematics has been discussed. It is agreed that a change in teaching methods is necessary in order to solve this issue. Thus we found it interesting to take a closer look at an alternative way of teaching. The purpose of this study was to find out what teachers and students associate concrete mathematics with and make a comparison between them.
Försöksmetod för automatisering av kvalitetssäkring av SKB
Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested. The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.
Uttorkningsmöjligheter i ett fuktskadat badrum med hjälp av spaltmetoden
Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.