Den här C-uppsatsen är en studie om dyslektikers kommunikativa interaktion med kompenserande specialgjorda datorprogram för träning i sitt användande av att skriva olika sorters texter. Ämnets olika nyckelord är det som är relevant för denna C-uppsats. Denna studies undersökningar har skett genom intervjuer med en speciallärare och en specialpedagog som är en form av experter på detta område och kan extra fakta om de olika eleverna (respondenterna). De har intervjuats för att få koll på vad de tycker och anser om specialgjorda datorprogram som jag undersökt. De har även fått svara på en enkät med liknande frågor som i intervjuerna. En annan metod som används för denna C-uppsats är en sorts semiotisk kvalitativ innehållsanalys för att påvisa hur de specialgjorda datorprogrammen ser ut. När det gäller en sorts avläsning till resultatet har den skett med en avläsning av Shannon & Weavers kommunikationsmodell fast till en egen modell samt via en kvalitativ analys som beskriver de specialgjorda datorprogrammens uppbyggnad. Den främsta slutsatsen som fram kom är att denna C-uppsats kommit fram användarnas/elevers och speciallärares och attityder och tankar kring sitt användande av dessa specialgjorda datorprogram som är Oribi Spellright och Vital, via den egna omgjorda Shannon & Weaver modellen. Denna C-uppsats är relevant inom det medie- och kommunikationsvetenskapliga området för den använder sig av Shannon & Weavers kommunikationsmodell samt en form av ett interaktionsmoment mellan människa och dator..

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In this work a study has been performed to show the different kinds of insulated balcony connections exists on the market. In the work there is also a short description of thermal bridges concerning balconies. A description of older solutions for balcony connections is given as well as a calculation of the difference in energy costs for a insulated balcony connection compared to the standard connection. The work includes a short description of the different products. After that there is a short information about their insulation properties, durability, acoustic performance, assembly, computer programme and a short analyses for each product..

This thesis has been developed inassociation with Strängbetong AB, Sweden.A few years backCementa AB introduced a new type of cement on the Swedish market: Byggcement,which is a Portland Limestone Cement. This type of cement is better for theenvironment and cheaper than Rapid Hardening Cement which is used today at SträngbetongAB.Strängbetong AB isvery interested in a change of cement in the factory and wants to know what ittakes to make a transition from Rapid Hardening Cement to Byggcement.This final projectaims at investigating how the workability and strength development are affectedby a transition from the existing cement to Byggcement and how we can change theproperties of the concrete by adding different types of superplasticizers. Laboratory and factoryexperiments were made, to investigate the transition..

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

I have in this study examined, through qualitative interviews, how adults with foreign background that are pupils in adult education in Sweden, understand the concepts democracy and dictatorship. Their expressed understandings have been compared with their former life experiences as well as with the aim of the social studies to create a qualitative understanding of essential social concepts. My starting point is theories about the adult in leaning processes. It has been assumed that the adult interprets the world much through former life experiences. I have also relied on the idea that having a qualitative, more scientific, understanding of essential subjects is important for the adult as a member of society and participator in the on-going political debate.

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

This report deals with hard surfaces and the factors which are behind the criteria for dimensioning, also dependent on the level, or volume, of traffic. A test was made on slabs of two kinds of natural stone. This was made to see if the values that were reached for breakload was transferable to the same tables that the concrete industry is using for surface dimensions of slabs and paving stones. The test showed very high values and the result, together with the written study, led to the author?s suggestion for a classification table where slabs of natural stone were divided in to different classes depending on traffic, thickness and durability..

This thesis has been developed inassociation with Strängbetong AB, Sweden.A few years backCementa AB introduced a new type of cement on the Swedish market: Byggcement,which is a Portland Limestone Cement. This type of cement is better for theenvironment and cheaper than Rapid Hardening Cement which is used today at SträngbetongAB.Strängbetong AB isvery interested in a change of cement in the factory and wants to know what ittakes to make a transition from Rapid Hardening Cement to Byggcement.This final projectaims at investigating how the workability and strength development are affectedby a transition from the existing cement to Byggcement and how we can change theproperties of the concrete by adding different types of superplasticizers. Laboratory and factoryexperiments were made, to investigate the transition..

A detailed dam safety evaluation (in Sweden called FDU) was performed in 2009 by WSP where stability control was performed for Långströmmen power plant with associated spillways. This evaluation concluded that stability could not be ensured, and risk of sliding occurred. The evaluation is based entirely on the recommendations outlined in RIDAS, the power companies guidelines for dam safety, and it is clear that extensive renovations are necessary to stabilize the dam.In this work, the stability will also be checked with guidance through new proposals on guidelines for concrete dams sliding stability, ELFORSK?s report 08:59. This report considered the guidelines in RIDAS as oversimplified, both from an international perspective, but also with regard to the current state of knowledge regarding dam safety.

This thesis discusses how the education in the Master of Engineering program can change to become more into line for the students needs, especially for the women, both directly in the education situation and later in their occupational roles. This is done using a gender perspective. Both the education and the occupation today is characterised by masculine norms and values. The education lacks gender perspective and is created by men, for men. The thesis gives concrete proposals on how to change two existing courses to better fit the students.

The purpose of my study is to contribute knowledge about how class teachers can work with students who are in mathematics difficulties. The question at issues I have is: Which methods can class teachers in grades 1-3 use to help students with mathematics difficulties? and Which obstacles and opportunities are there in this work? To get answers to my questions, I have read relevant literature and interviewed 3 class teachers in central Sweden. Through my interview I learned that education should include and build on concrete materials and methods. I also got to know that time is the biggest obstacle to helping students with mathematics difficulties. Keywords: mathematics difficulties, methods, obstacles, opportunities.