SecRePac is a household appliance that simplifies sorting of packaging such as milk, juice and yogurt containers. By shredding the packages SecRePac reduces its volume uptake both in the home and at the recycling station. This leads to minimization of both transports to the recycling stations and truck transport for emptying the containers at the recycling station.The greenhouse effect deteriorates and becomes worse and worse leading to extreme climate changes and natural disasters such as floods as an example. Carbon dioxide emissions are the major reason for this and at least 30 percent of all these emissions come directly from transports. In the EU carbon emissions has decreased in the past few years.

 AbstractThis is a bachelor?s thesis within the program society development on the collage Mälardalenshögskola. The subject that will be handled is knowledge recycling, this intervenes very wellwith the program I am undergoing, and this is because Construction Company?s does ingeneral do the same mistakes over and over again. In the long run this will mean higher endprices for the end user.

The waste fractions offered to households in Sweden differ depending on where you live. The responsibility for the waste are grounded by the Swedish law where the municipality are responsible for the collection of household waste and FTI are responsible for collecting all packages and papers that the households sorts out. A new waste regulation is under consideration where the responsibility for the household waste may change. The bulky waste from households is collected at recycling centers where the households leave it in different containers for different fractions. These recycling centers are formed different and the fractions offered in them also differ depending on in what municipality they are located.

SecRePac is a household appliance that simplifies sorting of packaging such as milk, juice and yogurt containers. By shredding the packages SecRePac reduces its volume uptake both in the home and at the recycling station. This leads to minimization of both transports to the recycling stations and truck transport for emptying the containers at the recycling station.The greenhouse effect deteriorates and becomes worse and worse leading to extreme climate changes and natural disasters such as floods as an example. Carbon dioxide emissions are the major reason for this and at least 30 percent of all these emissions come directly from transports. In the EU carbon emissions has decreased in the past few years.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

In Sweden, responsibility for the collection and recycling of packaging and newspapers lies with the producers. Therefore, the major producers created a jointcollection with 5800 recycling stations. The stations are the responsibility of a coordinating body, Förpacknings och Tidningsinsamlingen (FTI) which ensures Government regulations are adhered to by the producers.In 2006, the Swedish Environmental Protection Agency (EPA) carried out an evaluation of the collection of packaging and newspapers. EPA´s research showedthat 80 percent of households were satisfied with the collection but that there were also shortcomings, including problems with littering at the recycling stations.We have tried to approach the litter issue from different angles in order to suggestpossible measures to reduce the problem. An important aspect proved to be uncertainties regarding the concept of operators.As there are currently many parties involved in the collection process this lead to the issue of who is legally considered as the operator of the recycling stations.

Concrete is a very common construction material. It´s characteristics are strength, durability and formablility. Superplasticizer is a common admixture, which changes the properties of concrete. Today (spring 2007) there are no certian mathematical methods to calculate the required percentage of this admixture needed to give the necessary set slump flow in the overall concrete recipe. Concrete batching companies must therefor experiment with different amount of superplasticizer in order to meet the specified slump and strength. The purpose og this report is to investigate if any mathematical relation can be established between the amount of superplasticizer used and the slump flow achieved. After carrying out some practical experiments using four different superplasticizers a direct relationship can be establish between the percentage of admixture used and the slump/flowability achieved. Unfortunatly at present due to the numerous variables, the calculation of mathematical formula can not be achieved..

This thesis in social anthropology is based on a field study on the Internet exploring Tibetan identity. With a post-modern approach the thesis explores the possibility fora non-tibetan to create a Tibetan Internet identity and become a part of the Tibetan community that exist on the Internet..

Since 1 January 2010 it is a requirement to use the European standards, Eurocodes, in Sweden when constructing bridges. One chapter that has caused an extra amount of problems for the engineers is the one about fatigue analysis, which resulted in us doing this thesis.To do this we had to read all of the Eurocodes that direct, or indirect deals with fatigue and calculating of such. We have read the background documents for the Eurocodes and master?s thesis in the subject. We also studied the calculations of bridges constructed by different construction firms.We have chosen to limit the thesis to discuss only road bridges made of concrete due to the lack of method for verification of concrete in the national appendix.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

A common way to stabilize high rise buildings is to use an elevator core built of concrete. Today, we use to build these elevator cores of in-situ concrete. Precast concrete twin wall (double wall) is a semi-finished product that has become more common in recent years. This diploma work studies how the twin wall works out as structural elements in an elevator core. The work also shows some possible ways of designing twin walls and highlights some important parts of the design that will be vital to the stability of the building.    The result shows that it is important to think through where the element joints should be placed.

This is a booklet with information and inspiration about precast retaining walls. The three chapters contain information about concrete as a material, how the surface of the wall can be altered, and a chapter with ideas for a new precast wall. I have obtained information through books, interviews, lectures and fairs. The retaining walls on the market do not correspond to the requirements of the Landscape Architects I have interviewed. I have therefore considered their opinions in the chapter containing my new ideas for new retaining walls.

Om människor fortsätter med det konsumtionsbeteende som råder idag kommer jor-den resurser ta slut. Den fossila råvaran petroleum används vanligtvis vid framställ-ning av polyester och polyamid. Petroleum har en 100 000 årlig process, vilket är en ofantlig skillnad i förhållande till den takt som det förbrukas. Därför har eventuella möjligheter att återskapa en ny filament av återvunnet syntetiskt blandmaterial un-dersökts i detta arbete.Det finns befintliga metoder för att återvinna polyester och polyamid som homogena material. Dock vid återvinning i en gemensam process av materialen får den slutliga produkten en försämrad kvalité.

Examensarbetet behandlar frågan om delegering av arbetsuppgifter. Utgångspunkten i arbetet ligger hos återvinningsföretaget Stena Recycling och fokuserar på region norr inom företaget. Denna region omfattar alla Stena Recyclings filialer från Gävle i söder till Kiruna i norr. Som det ser ut i dagsläget ansvarar filialcheferna på respektive ort för i princip alla arbetsuppgifter, utan att ha delegerat ut något ansvar till arbetstagarna. Detta medför en stor arbetsbelastning för filialcheferna och de har haft som önskan att få avlastning av arbetsuppgifter som istället skulle kunna delegeras ut på andra anställda inom organisationen.