This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising   the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.

A school should be a safe place for all students. The existence of discrimination, harassment and offensive behavior should according to Swedish school law not exist in the school environment. Since the year 2006, when a law on equal treatment was passed, all the schools in Sweden must have a treatment plan that is revised annually to prevent discrimination, harassment and abusive treatment.In this master thesis, I will examine the equal treatment plan between four different elementary schools in Nynäshamn.The purpose of this paper is to examine how the equal treatment plan exposes the bullying and the types of problems and solutions addressed in the elementary schools equal treatment plans. Based on the purpose, I have formulated two questions:How do the elementary schools in Nynäshamn municipality describe bullying in the equal treatment plan?What kinds of problems and solutions are addressed in the equal treatment plan evaluations?This thesis is based on text analysis and content analysis on the schools equal treatment plans.The study is based on the theories from a norm critical perspective.The conclusion of the study is that all four schools treatment plan see abusive behavior as something serious and preventive.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

Too much attention has been given to mainstream approaches in performance management and management accounting research, without taking in to account changes in the environment with the rapid growth of online retailing. This paper evaluates how and/or if performance management differs in online contexts by using a conceptual model developed by Ferreira et al (2009). The model and its components are tested on three multichannel- and six e-commerce businesses. The result and its analysis is commented on by two e - commerce experts. The result shows that the operation method of the models twelve components do not differ in terms of work methods in online and offline contexts.

The high level of energy consumption that the industrialised countries have reached and thepollution that this brings has long been a cause for analysis and debate, development and usageof so called renewable energy sources is therefore more important than ever. The energy in theelectromagnetic radiation from the sun is an interesting alternative. One way of harvesting thisenergy is by using solar cells, devices that generate DC current when exposed to electromagneticradiation.The goal of this master?s thesis was to design a solar powered power supply to Syntronic AB?sMidrange platform. The envisioned application is a stand-alone distributed embedded system,for example a node-based temperature monitoring system.

The travelling sector is expanding worldwide, which puts all destinations under pressure to have a functioning social system and good resources to manage the problems and take advantage of the opportunities that the tourism sector can offer a community. The area around Kisumu in Kenya, like much of Africa, tourism can simultaneously ensure a stable financial future while it removes, as a result of a growing population, more and more of the scenery that many tourists want to experience. Responsible travel to natural areas that promotes conservation of the environment and improves the welfare of local people is what defines ecotourism. A concept that implies a closed cycle, where visitor?s needs are met in balance with what can be given back, without risking creating imbalances in society. Along the coast of Lake Victoria, valuable papyrus wetlands provide Kisumu vital ecosystem services such as water purification, climate adaptation while it also serves as a reservoir for biodiversity.

The door and its surrounding, is an important part of all buildings. It often amount to a significant part of buildings total costs. The more demands of functions the largerdoes the costs grow.The purpose of this report is to analyze those demands and how to fulfill them.Another purpose is to examine of which reasons the cost grow and how to avoid it inthe best possible way. The study will be performed in collaboration with Bjerking AB. To define the demands a literature study will also be performed.

The progress in the field of technology is often described as massive and its development has had a great impact on the social development (Vetenskapsrådet, 2012). As a result of the digital evolution, there has been a change in the way customer and company interact (Normann, 2011). The traditional way for players to interact with each other required an interaction human to human (ibid), a mode of interaction that now can be replaced or supplemented by todays technology and often Internet-based solutions (Salomonson et al., 2013). These technological solutions, the technical interaction, are often referred to as self-service systems. These systems enables the customer to carry out the tasks previously performed by the company (Hilton and Hughes, 2013).

En sammanfattning av uppsatsen på maximalt 8000 tecken.The purpose of this study was to analyse if there are in-store consumer behaviour differences between the consumers that use ASF and the consumers that not use ASF in store. More precisely this study had two objectives. The first objective was to create a conceptual model depicting the various behavioural effects that the use of ASF may result in. These variables were tested empirically in order to analyze if the use of ASF influence in-store consumer behaviour. The second objective was to analyze if there are differences in the routes taken by the consumers in store, in relation to whether the consumers use the ASF or not..

Idag genomförs en avreglering av den svenska Försvarsmakten vilket medför att Försvarsmakten kan komma att efterfråga fler integrated solutions från försvarsindustrin. Integrated solutions är ett relativt outforskat koncept som blivit alltmer vanligt i företags strategiska tänkande. Detta koncept innebär att leverantören inte längre enbart tillhandahåller separata produkter och tjänster utan ett företags specifika produkter och tjänster kopplas samman till en specialanpassad lösning för kundens enskilda behov. Detta innebär att det värde som kunden upplever i och med konsumtion av den specialanpassade lösningen ökar i jämförelse med det värde som uppstår när företagets erbjudanden endast innefattade standardiserade produkter och tjänster. Det resultat som framkom i vår uppsats var att integrated solutions är en sammankoppling av produkter, system och tjänster vilket resulterar i en helhetslösning.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.

A large proportion of the energy consumption is in the building industry and a large part goes to heating our homes and premises. In the developing countries' development now threatens the large consumption of energy in our earth's climate. It is in the West world that we must be good role models in terms of energy efficiency. One solution to reduce energy consumption for heating of buildings may be to continue to build low energy houses and passive houses, but it is also about rebuilding the buildings that currently have high energy consumption such as the old Million program Houses. These buildings will be standing many years and their energy consumption will not diminish over time by itself and energy prices will certainly not diminish in the future.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.