The coproduct, dried distillers grains + solubles (DDGS) from ethanol production based on wheat contains much rumen degradable protein and fiber with low digestibility. To compliment this quality in an effective way a grass silage low in protein and much digestible fiber is needed. The aim of the study was to investigate the effects of adjusting the crude-protein concentration and fiber quality of the silage when feeding DDGS and of varying the inclusion level of DDGS, when feeding the adjusted grass silage, on intake, milk yield and composition, faecal traits and feed efficiency. Four different total mixed rations were compared. The normal grass-clover silage had a crude protein content of 17,8 % and an NDF content of 46,2 % of dry matter. The adapted grass silage had a crude protein content of 14,6 % and an NDF content of 52,9 % of dry matter. The diets were formulated to have similar nutritional content except for A + 4 which had a higher content of rumen degradable crude protein and a lower concentration of NDF.

Today we see a growing need and interest in working towards sustainable development. To be able to contribute to a sustainable development as individuals/business we need to emphasize the importance of education and contextualisation that learning occurs in a sense that is relevant to the learner.This is the background to this study, which in turn is the basis for an education that focuses on how to environmentally secure your purchases, an opportunity for us to set environmental standards purchasing products and services. The process for purchase is considered by many to be a key factor in businesses work towards sustainable development. Key people in this process and target audience for this education is environmental, purchasing and procurement managers.The purpose of this study is to design an education calledMiljösäkrade inköp from the target audiences? knowledge, interests and attitudes, together with literature.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

The level of cadmium (Cd) in Swedish arable land has increased during the last century and the average concentration of Cd in the plough layer is today 0.23 mg/kg. The increase is mainly due to anthropogenic activities such as phosphorus fertilizing, liming, import of feed, and atmospheric deposition from industrial emissions. Cadmium in the soil will be taken up by crops and is thereby transferred to humans via food. Carrot is one of the crops of concern, both because it may contain quite high Cd concentrations and due to the large consumption in Sweden. In the body, Cd is stored mainly in the liver and the kidneys and may cause several diseases already at low concentrations.

Uranium (U) is a naturally occurring component in bedrock and under the "right" conditions it can dissolve and move into the ground water. Since many people in Sweden depend on drilled wells as their main drinking water supply, they may be exposed to the uranium in the water. Radioactive radiation is not the major concern associated with naturally occurring uranium. It is rather the chemical properties of uranium that make it a potential danger to human health. Uranium is proven to have toxic effects with respect to the functioning of the kidneys.

AimThe aim with this study was to acquire knowledge of mental training and if you can use it in the elementary school to increase in a short period of time the performance in a coordination test. Furthermore we wanted to investigate teachers understanding of the possibilities to perform this kind of training in the elementary school, and if there is support for this in the school regulation.MethodAs method we have used a combination of a literature pre-study, interview and at the end an experiment. Before the experiment and interviews could take place we studied literature about mental training to get a basic knowledge of the subject. The facts we learned from our pre-study and interviews gave us the base for our experiment. The experiment group included 23 pupils in a third class at school situated in Stockholm.

Composting is a process in which organic matter is mineralized by microorganisms. In January 2005 landfilling of organic waste was prohibited in Sweden. With this prohibition composting has become an important alternative to handle the produced organic wastes. One problem with continuous small-scale composting is the production of organic acids that will inhibit a further composting process. The aim of these theses was to study what effects temperature and dry matter content had on the production of organics acids, and what effect the organic acids had on the mineralisation of the substrate as well as the stability during storage of the product.

The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

This paper examines the film distribution and exhibition sector in Europe. The general analysis of these sectors? situation was made. Moreover, the comparative and more in depth analysis of three countries by the Porter?s five forces model was made; These were United Kingdom, France and Denmark.

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.

This thesis, designed as a case study, is about complications concerning conservation of a decorative oil paint on lime plaster from the drawing-room in Mostorp castle sited in the county of Halland in south-west of Sweden. The building was built 1878-80 with an exterior of granite. The interior walls were made of clay bricks, lime mortar and lime plaster. The oil paint is applied to a layer of putty. The combination of different materials, which are organic and inorganic, affects the movement caused by internal and external stress.

AbstractMany pupils struggleto read. Teachers must therefore know how to motivate these pupils. In this qualitative study the aim is to investigate what some teachers do to motivate pupils to read. Data were collected through interviews with four teachers from two schools. The teachers said that the choice of book was extremely important for making pupils interested in reading, and that reading aloud and cooperation with parents and libraries are of great importance.

It is important to construct or recreate different types of wetlands and study their retention of nutrients, since knowledge of their effectiveness in this matter is poor. In 2003 a wetland was constructed on an old meadow on the western shore of Lake Bornsjön in central Sweden. The main purpose of the wetland was to reduce the amount of phosphorus entering the lake, which is the back-up water supply for Stockholm when the city cannot obtain water from Lake Mälaren. Large areas around Lake Bornsjön consist of agricultural land and the nutrient concentrations in the inflows to the lake are usually relatively high (approx. 1 mg/l total nitrogen and 0.05-0.1 mg/l total phosphorus).

The euthropthication of the Baltic Sea is a threat that is beginning to be taken seriously by the governments concerned. In Sweden, regulations concerning the allowed nitrogen (N) concentration in the effluent water from wastewater treatment plants are being tightened up. The Rimbo wastewater treatment plant has been imposed to reduce the annual mean concentration of total N in the effluent water to levels below 15 mg l-1. A more and more common way to reduce the nitrogen level in wastewater is to let the water pass through a wetland. This study investigates the possibility to build this kind of wetland at the outlet of the Rimbo wastewater treatment plant.A prestudy of the topography, soil characteristics and groundwater flow indicates that the land area in question is well suited for the construction of a wetland.

In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.