Background: Due to outsourcing, the material flows in the telecom equipment industry have undergone major changes, which in turn has imposed new challenges for packaging supplier Nefab who delivers to the industry. In order to achieve market intelligence, Nefab wants to map the material flows, and investigate possibilities of further reusable logistical packaging systems.Purpose: The purpose of this thesis is to describe the typical features of the logistical material flows in a technically based, rapidly growing industry, and analyze the driving forces and obstacles, which influence the selection of logistical packaging system. Procedure: After developing a theoretical framework consisting of general logistical theories and theories related to logistical packaging, we have interviewed companies in the logistics channel of Ericsson Radio Systems.Results: We have found the main characteristics of material flows in our investigated industry to be Variations in Demand, Focus on Time-to-Customer, and Globalization of Logistics Channels. Regarding driving forces and obstacles in the selection of logistical packaging systems, we have identified Transportation Characteristics, Customer Demands, Quality, Handling & Administration, and Current Packaging System as important factors..

Sammanfattning Idag finns många interaktiva tjänster, till exempel publika webbtjänster. Dessa tjänster väljer användaren själv om han/hon vill använda sig av. Detta betyder att produkten bör vara enkel och behaglig att använda, annars tappar man användare och eventuella kunder. Det finns ett flertal teorier och guidelines för hur man gör en webbplats användbar. I denna rapport har vi valt att behandla de teorier som rör navigering och informationsstruktur och jämför dessa med Blekinge Tekniska Högskolas webbplats.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The majority of all power cuts that affects individuals and communities are caused by earth faults on the power transmission lines at 10kV and 20kV level [1]. If these power cuts could be eliminated, less disturbances and interrupts would lead to large amounts of money savings.Swedish Neutral has developed such a protection system. When an earth fault occurs power is injected into the neutral point of the transformer. The RCC (Residual Current Compensation) protection calculates a compensation current exactly 180 degrees out of phase to the fault current. Doing this, the voltage at the fault location becomes very close to zero, without affecting the power transmission.The protection system can only compensate automatically for the fundamental frequency (50Hz), and manually for the 3rd, 5th, 7th and 9th harmonics.

NMD 100 is a notes and media dispensing machine, manufactured by De La Rue Ltd, located in Flen, Sweden. The customers, mainly bank offices, have expressed a need for a more comprehensive description of errors occurring from time to time in their machines. In order to acquire a BSc-degree in Computer and Electronics Technology at the University of Linköping I have carried out a diploma work, regarding new computer programs to fulfil the customers? wishes. The machine NMD 100 is connected to its PC through handshaking.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

In today?s society we depend on technology to perform the simplest tasks. Whether we are engaging in conversation with a friend or are navigating in traffic, we are likely to be found with some technological device in our hands. This dependence has grown over a period of time, and many of us have failed to reflect on the impact technology has had on our lives. The emergence of so-called One-to-One projects, where teachers and students gain access to a personal laptop, does however provide an excellent opportunity to do so.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

Tårsubstitut används mycket bland linsbärare och personer med torra ögon. Detär vanligt nuförtiden att arbete i kontorsmiljö och vid datorer ger problem medtorra ögon, Computer vision syndrome (CVS), och att dessa personer dåanvänder tårsubstitut. Ofta står det i tårsubstitutens bipacksedel att de kan geproblem med dimsyn en stund efter applicering.Tidigare studier har visat att aberrationerna i ögat ökar vid applicering avtårsubstitut och möjligtvis är det anledningen till att dimsynen uppkommer.Syfte: Syftet med studien är att ta reda på hur mycket synkvaliteten påverkas avtvå olika tårsubstitut och hur lång tid den påverkas.Metod: Metoden innebar att närvisus och aberrationer mättes på 30 patienter (60ögon) först utan tårsubstitut. Sedan applicerades det första tårsubstitutet(Systane) i höger öga och ytterligare en mätning av närvisus och aberrationerutfördes. Därefter gjordes ytterligare 5 mätningar av aberrationerna, en var fjärdeminut.

Universal Design is a well established methodology with the fundamental purpose of designing products to be usable for as wide audience as possible, without the need of special adjustment to suit the individual. In this essay, Universal Design has had a clear influence in both the process and the result. The choice to use Universal Design as methodology in this usability evaluation, has essentiallv to do with the target audience.As a part of the design process of MyTobii C8 has Tobii Technology ask for a usability evaluation. MyTobii C8 is an 8" touch screen computer with a windows based operating system which will initiate the software MyTobii C-Series Control. MyTobii C-Series Control is the control panel for MyTobii C8, whose interfaces constitute the platform for various modificarion of the unit.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.