The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..

Problem: This report concerns how the students of Södertörn högskola values physical papers. Even though technology have made it possible to digitalise documents, students today print and copy documents more then ever before. It will examine what the students finds valuable in physical papers and why they choose to print a document they just as well could read and manipulate via a computer.Method: This report consists of an empiric study, in form of a web poll and of a number of interviews. Furthermore earlier studies on the matter will be taking in consideration during the analysis.Results: The study shows that the students of Södertörns högskola values physical papers highly. The students choose to print a document since they find that it is easier to read, to make notes and that a printed document is easier to use on the move, rather then using a computer..

The purpose of my study is to determine students? attitudes to the Natural Science subject. I want to contribute to scientific discourse about different learning styles that can respond to childrens? requirements in teaching as well as to determine the student?s experience of learning styles. The studies were carried out at an upper secondary school in Stockholm (spring term 2011) for three different classes.

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

Dagens teknik har bidragit till att mobiltelefonens användningsområden har expanderat avsevärt de senaste åren. Detta har lett till att alltfler mobila tjänster har dykt upp på marknaden. Uppgiften i detta examensarbete består i att utveckla en version anpassad för mobiltelefoner av den existerande produkten TelMe, som är en webbtjänst för vikarietillsättning inom olika verksamheter. Den mobilanpassade versionen kommer att gå under namnet TelMe Mobile. Problemställningen var att implementera de väsentliga funktionerna i produkten med avsikt för att göra dessa tillgängliga för mobiltelefoner.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

This bachelor thesis aims to analyse the effects of changes in management control systems following acquisitions, and deduce whether or not these effects are in line with the acquiring firm's objectives of the acquisition. Through a case study of technician consultant firm Energo, acquired in 2010 by ÅF, the study assumes the perspective of the acquired firm. Data has been collected through in-depth interviews at Energo and ÅF and complemented by internal documents to enrich and validate specific facts and statements. Data was then arranged and analysed through Otley and Fierriera's (2009) framework Performance Management Systems to understand how management control systems were constituted before the acquisition, what changes were made following the acquisition, how this process was accomplished and how it was experienced, in order to come to conclusions about the effects of these changes. The study concludes that the changes in Energo's management control system following the integration with ÅF, had significant effects on the outcome of the acquisition, primarily as it led to a high rate of Energo's employees resigning.

This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

Artificiella neurala nätverk (ANN) har många användningsområden inom datavetenskap. Några av dessa är mönsterigenkänning, robotik, processkontroll, optimering och spel. Detta examensarbete kommer att handla om hur en alternativ lösning på den traditionella arkitekturen av hur ett neuralnät kan se ut. Jag kommer att undersöka om man kan ta ett stort och komplext neuralnät och bryta ned detta till mindre neuralnät utan att förlora kvaliteten på botarna i en spelmiljö kallad Open Nero. Detta för att försöka minska beräkningshastigheten av neuralnäten och förhoppningsvis även göra så botarna lär sig ett bra beteende snabbare. Mitt examensarbete kommer att visa att min lösning av arkitekturen för ett neuralt nätverk inte fungerar speciellt bra då botarna inte lärde sig tillräckligt fort.

The aim of this study was to investigate how seasonal variations affect the quality of logging residues. The study was hosted by VIDA Energy. Logging residues can be processed and transported within different systems. Today the dominant systems are chipping at landing and bulk transportation of logging residues. In these systems the handling of the logging residues are carried out in the same manner up to the landings. Moisture content at the time of chipping is the primary quality parameter. Fine fractions of logging residues are strongly dependent on moisture content in storage.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

This thesis examines the approach for implementing strategy that has been applied by the study object, Svenska Spel. The specific approach originates from the theories of Elliot Jaques, whose key proposal is that individuals have different capability of carrying out tasks over different time-spans. The main purpose of the study is to analyze how the approach has influenced the management control systems in use, in order to ensure that the strategy is successfully implemented on corporate as well as operational level. Twenty in debt interviews conducted with employees, representing a vertical cross section throughout the organization, are the main source of the study?s empirical foundation.

In this thesis I'm trying to investigate how good educational computer programs work in elementary school. I delimited the study to contain one elementary school in the stages of 6 to 9. The method I used was qualitative and the approach was inductive. I interviewed four teachers and five pupils as the way to collect data for the study. The theories I used were parts from different books with authors, which have done similar studies and researches.

Through a case study, I wanted to find out what advantages and disadvantages local companies consider with scrum and what they think about its future. To find out what scrum is, I read the literature and scientific articles and then wrote surveys based on my thoughts. Further, I also wanted to find out if it?s possible to use scrum in a school environment and therefore I visited a high school class who used scrum in one of their projects. The result was good but could have been better as it requires more training of scrum to understand everything. The surveys were distributed to various local companies. After having received a lot of answers, I concluded that the clear priority was the most positive feature of scrum and the most negative was that it was difficult to get the rest of the organization to understand scrum, which creates problems. Both high school class and local companies believe in scrum?s future, even if they think scrum will be partially modified to adapt to the software-development in the future. According to the survey responses, the most important to get the projects to be successful both now and in the future is that everyone who work with scrum is right educated..