Chapter 1 defines the aim of the project and gives a general orientation about ground heat extractors. In chapter 2 physical processes that could be expected to be involved in the heat transport around a ground heat exchanger are discussed. It is shown from a literature study what amount of moisture transport due to thermal gradients there could be expected in a ground heat exchanger. The conclusion is drawn that the moisture gradient (Sr) is of same magnitude as the driving temperature gradient (°C). At the expected amount of increased moisture around the pipes the moisture transport could be considered to have a little effect on the brine temperature.

Att sätta sig in i system kan vara krångligt utan rätt sorts dokumentation. Vi har undersökt vilken dokumentation som kan vara lämplig att lämna över till nya utvecklare, som ska arbeta vidare med systemet i software maintenance fasen.Det har gjorts genom att vi har gjort en litteraturstudie om dokumentation samt undersökt vad för dokumentationsartefakter som används när man ska sätta sig in i datorsystem. Vi använde eXtreme Programming för att utveckla ett system som vi försökte dokumentera samtidigt som vi utvecklade det.eXtreme Programming förordar muntlig kommunikation, vilket är svårt att lämna över till nya utvecklare. Vi upptäckte under vår utveckling att det var svårt att föra in dokumentation sam-tidigt som utvecklandet pågick,  därför använde vi bara enhetstester och  strukturerade kod-kommentarer under utvecklingsiterationerna.Vi undersökte hur dokumentationen som skapats fungerade genom att göra en undersökning bestående av strukturerade intervjuer där de fick komma med kommentarer om hur dokumen-tationen hjälpte förståelsen för systemet.Vi lämnar ifrån oss en vidareutveckling  av eXtreme Programming  som innefattar en doku-mentationsiteration  innan överlämnandet  samt en studie om vad för dokumentation som är värdefull att ha vid systemöverlämningar..

The aim of this study was to describe and analyse the perceptions that ten 12-15 yearold pupils with special educational need, who had been assigned a personal computer, have about Information and Communication Technology (ICT) in the learning process. Data was collected by personal interviews and observations. Sociocultural perspective and phenomenographic research approach were used as theoretical and methodological frameworks in analyzing and understanding the result. The major conclusions were that most respondents perceived the computer as beneficial assistive technology for learning, but some felt singled out by having a computer to assist in learning. Students had various opportunities to succeed in using their tool depending on e.g.

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

According to the curriculum the teachers have a responsibility to adjust the activities in the classroom in order to suit the pupils and to give them the means of assistance the pupils need to be successful in their learning. The teachers should also stimulate the interest to learn and support the pupils? self esteem. One of the problems a dyslectic pupil faces is an often weak self esteem. Another is the weak phonological awareness which makes it hard to fully understand the context and to recognize different phonemes when writing.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In Sweden there are currently two separate guidelines you may use whenperforming calculations on frameworks, BKR and the Eurocodes. Although at theend of 2010 you are not allowed to use BKR any longer and only the Eurocodeswill be viable. The aim of this thesis is to explain how the Eurocodes and EKS work and alsohow they compare to the current guideline BKR. Similarities and differencesbetween these guidelines are also discussed so that the reader will get a betterunderstanding of how the Eurocodes are applied. The areas discussed are asfollows:Principles and adviceSafety ClassesSymbols and IndexesLifespanLoads and partial coefficientThe thesis also deals with the impact that this transition into a new guideline willhave on corporations, guideline costs, education and computer software. As anexample a rough estimate on what costs this transition will create on a companywith 20 employees is also included. Calculations have been performed in order to investigate how the design valuesdiffer between the two guidelines, the Eurocodes and BKR.

The purpose is to analyze if the students have any use of their computer education at a senior high school level or if there is a demand for them to proceed studying. Does the students background have any importance or is it their own motivation that makes the student advance to higher education.In this report we ask ourselves the question, if the students have any use of the knowledge gained at senior high school in computer studies at a higher level. Do the students have any chance for employment based on their senior high school grades in computer studies after graduation?  Do the schools that follow the senior high school guidelines within programming and databases give these students an advantage towards those that have not received the same fundamental education?The method used for the survey is a group questionnaire.  The questionnaire was distributed at one and the same time and then collected to examine the results. The survey results showed that students who seek work based only on their senior high school grades, received only a temporary position for different lengths of time.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.