Computer programs must give a technical effect that goes beyond"normal physical interaction"to be considered to belong to a technical field. The invention shall be be susceptible of industrial application, which means that it should be possible to reproduce or use in any other industrial way. The reqirement that the invention shall be new means that the technique must not be previously known because of patents, published articles, etc. That an invention shall be a contribution to the state of the art in a technical field means that the invention shall not be obvious to invent for a person skilled in the art. Patents do effect the innovation among the inventers, but in most industries most inventions would be invented independent if there was a patent system or not.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

Lärare använder IKT i olika utsträckning i verksamheten och de har olika kompetens när det gäller hur verktygen ska användas (Skolverket 2009). Kompetens och kunskapssyn är två begrepp som är nära förbundna. Lärarens kunskapssyn påverkar hur verktygen används i verksamheten och kompetensen påverkar om läraren kan använda verktygen på rätt sätt för att skapa möjligheter till lärande. I uppsatsen studeras lärarens kunskapssyn och hur den påverkar undervisningen med IKT.  Frågeställningar:   Hur kommer kunskapssyner till uttryck i lärarens undervisning med IKT? I uppsatsen görs en litteraturstudie av ett urval av studier som tolkats utifrån hur syner på kunskap kommer till uttryck genom lärarens undervisning med IKT.

Open source is growing outside the boundaries of hackers, amateurs and software development, creating a humongous potential in many different areas and aspects of society. The intrinsic and extrinsic motivations that drives open source have been in the subject of much research recently, but how they affect each other when paid and unpaid contributors come together is still hidden in obscurity. In this study I investigate how intrinsic and extrinsic motivation correlates with each other and how those correlations affect paid and unpaid open source software contributors. The literature synthesis is based on of systematic reviews through searches in library databases, identification of articles by searching on the Internet and by reading relevant books. My results indicate that intrinsic and extrinsic motivations continuously affect each other and that paid contributors are more vulnerable since their extrinsic motivation in terms of money is reached only when many other motivations are fulfilled.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

Open source software has recently been discussed, not least in media as a revolution in IT. A number of advantages have been listed in changing proprietary software into open source software. Examples of such pros are no expenses for license fees and improved efficiency. In spite of this, few users have made this change. One of the reasons is a distrust of the quality in open source software.

The aim of this study is to highlight the computer as a learning resource in the education and give us knowledge about how the students uses the computer in year one in a selected High School where one computer per student were introduced in autumn 2011. The aim is also to contribute to the discussion about how the computer can become a natural learning resource for all students in all subjects, including the students in need of special support.How are the High School students using the computer?Are there differences in computer use, whether the student is in academic or vocational program?Are there differences in computer use between boys and girls?Do the student experience that the digital competence is increasing together with if they experience the computer as aid?In what degree do the teachers encourage the students to use the computer?How much do the students use the computer to learn mathematic?The study is based on a survey of all students in year one in a municipal High School.The result of the study is showing that the students first of all use the computer to play music, surf the Internet and to be logged in on social media (eg. Facebook). The students have learned to use the computer for the tasks they need, although the teachers don?t encourage the students to use the computer in any higher means, not in mathematics and not in other subjects.

The disconnect between assumptions regarding computer users interactions made by software engineers and the actual interactions do, for various reasons, not always match. Gathering actual usage data from user interfaces can enable software designers to make better educated decisions. By buildning a prototype for collecting such data from a diagnosis tool for the automotive industry this project has shown not only how to benefit from the data but also how to perform the work. The data is 1 600 sessions consisting of 26 000 individual events. From this it has shown that available tools can assist in rudimentary questions regarding usage.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

This essay analyzes the market for entertainment software by identifying and explain the products typical properties, in addition i clarifies the behavior of consumers and producers. One of the most important property related to software is the ease with which it can be reproduced. When such reproduction is done illicit it´s called piracy. The software industry often claims that piracy leads to big losses for the companies as well as in welfare, the essay clarifies that this doesn´t has to be the case. On the contrary the possibility to cheap production and distribution may lead to an increased welfare.

This report describes a final thesis done during the spring of 2008 as part of the bachelor degree in computer engineering degree at the School of Engineering in Jönköping.The client is working in the consulting business and is involved in, amongst others, work regarding information security. Within this field they perform so called Threat, Risk and Vulnerability assessments. Today these assessments are done by a predefined method, but many details are controlled by the person documenting the project. A wish was made that the implementation was standardized, it should also ease the task of estimating the need for time and money. The solution for this seems to be a software tool.