This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

When driving hard and cornering on a circuit good control of a car?s roll is desired, so the car reaches steady state quickly but yet in a controlled fashion. This control is mainly given by the combination of the cars springs, shock absorbers and anti-roll bars.The aim of this report is to investigate, analyze and measure a Porsche Boxster?s turn in behaviour and roll dynamics as well as with the aid of simulation results give suggestions for improvement of the previous mentioned combination.Two different simulations were made, one based on a simpler model that was based on an evolved version of the bicycle model in Matlab and one was more advanced model in the simulation software rFactor. Measurements of the real car was made using a GPS-based measurement system.

The study is based on Lev Vygotskijs and John Dewey's learning theory. Such is ?the zone for immediate development? and ?learning by doing?.Purpose: The study's purpose was to examine how four teachers´ work with bilingual children's language development in a preschool and in a preschool class. These questions will be answered in my study: 1). which view of bilingualism have been the educators? 2).

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

The main reason for doing this kind ofproject was to find out if it was possible to make a relatively advanced application with user friendly tools. We tested the software MIT App Inventor, and the ability to create a useful application for people who wants to get an overview of their energy intake.During the process we found out that it was possible, but minor setbacks occurred. The main idea of our vision; to make a calculator and a registry with different kinds of food and their amount of calories, was completed quite easily. Later on, design alternatives and more advanced functions were not possible for us to make.This might have been because of the short amount of time the project was given, but also, and more likely, because the software did not contain that kind of advanced functions. Even if there were factors that held creativity back, the basic idea was possible to form..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Purpose: The purpose of this thesis is to study the causal relationship between bank sector development and economic growth in four Nordic countries (Sweden, Finland, Denmark and Norway).Method: Our thesis is based on a quantitative method. The study consists of a compilation and analysis of key financial indicators that represent economic growth and bank sector development. A Granger causality test has been conducted on the time series in order to measure the causal link between economic growth and bank sector development.Theoretical framework: The study is based on the theory of endogenous growth and the causal relationship between bank sector development and economic growth also known as the demand following and supply leading hypothesis. Results: The results of the four countries are ambiguous. Except for Denmark, that follows the supply leading hypothesis, the remaining countries do not show a unanimous result..

This study aim to investigate the conditions framing the professional development situation for physical education teachers (PE) in a small municipality in the south of Sweden. The Swedish National Agency for Education declare that "focus must be directed towards strengthening the teachers' profession", and that "schools need well-trained teachers and good teaching to help students achieve good results". The study focuses both the schools? contribution and the way in which the teachers take own initiative and are motivated to develop their professional skills. The investigation is all based on teachers' perspectives.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

This thesis was made possible by the company Verendus system AB, which is the leading developer of dealership management systems in the caravan and camper market. The goal of the thesis was to create a statistics module for a new producer system envisioned by Verendus. The new system is aimed at manufacturers and importers of caravans and campers, with the goal of enabling its users to create more effective production lines. By providing statistical data to mentioned users they will be able to predict market trends and customize their production lines accordingly. Today such software does not exist which leads Verendus to think that its arrival would lead to a success on the market.Before the development and design of the producer system began, a new agile method had to be developed, MAM (Minimum Agile Method).

This thesis examines the verification of the terms and conditions stated in contracts based on the Public Procurement Act. In March 2013 the Swedish state procurement commission released " Good Business - A Strategy for Sustainable Public Procurement " (SOU 2013:12), which found that the proportion of control and verification is relatively low. The thesis examine how verification is carried out and looks for an explanation to why verification is not more oftenly performed. To answer these questions two care studies, based on seven semi-structured interviews, is presented as the empirical material. Network theory has been used to analyse the empirical results, and aspects of commonly used theories such as contract management and "Markets and Hierarchies" by Williamson has also been taken into account.