As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

The development in electronics increases the demand for good design methods and design tools in the field of electrical engeneering. To improve their design methods Ericsson Microwave Systems AB is interested in using computer tools to create a link between the specification and the implementation of a digital system in a FPGA. Xilinx System Generator for DSP is a tool for implementing a model of a digital signalprocessing algorithm in a Xilinx FPGA. To evaluate Xilinx System Generator two testcases has been designed. The testcases are selected to represent the FPGA designs made at Ericsson Microwave Systems.

Inom militär flygindustri är produktdatahantering i produktlivscykeln och utveckling av logistikstöd centrala områden för att hantera krav och kostnader. Senaste strategin för dessa utmaningar grundar sig i modellbaserat konstruktionsunderlag ? model-based definition (MBD). I detta perspektiv står disciplinen teknikinformation inför förändringsarbetet att utnyttja möjligheterna med MBD. Förbättringar i presentationsmetod för illustrationer och effektivare arbetsmetoder för produktion förväntas.Detta förändringsarbete undersöktes genom en fallstudie av Saabs konceptutveckling för teknikinformation till stridsflygplanet Gripen NG.

Den här rapporten behandlar frågeställningen om hur man kan anpassa systemutvecklingav ett informationssystem enligt livscykelmodellen till att inkludera användbarhetstester. Frågeställningen grundar sig i att god användbarhet inte är ett explicit uttryckt mål i Andersens beskrivning av livscykelmodellen. För att besvara frågeställningen har vi utvecklat och testat ett bokningssystem åt en mindre verksamhet. Utvecklingsarbetet har bedrivits enligt en egen anpassning av livscykelmodellen. Testerna har utförts enligt metoden cooperativ evaluation.

Purpose: The aim of the study is to describe how Leanlink, as a part of the municipality ofLinköping, uses balanced control as a management model. The authors compare, based onliterature of the balanced scorecard, the way Leanlink control their activities. Further, theauthors try to understand why the administration chose to use balanced control in the waythey do.Methodology: The authors have chosen a qualitative case-study method to achieve thepurpose of the thesis. Through semi-structured interviews primary data have beencollected, that have been analyzed along with secondary data such as, business plans andwebsite.Theoretical perspectives: The authors shortly emphasize general government as it appearstoday, to further examined how and why the scorecard is used, its dimensions andobjectives and difficulties that may arise along the way.Empirical foundations: The empirical findings are based mainly on information frominterviews with representatives from the case company. Some information is taken fromthe municipally website and additional information through interviews.Conclusions: It is possible that it became a too big a commitment for Leanlink when theyselected the Balanced Scorecard as a management model.

This thesis is the final part of bachelors program of Nuclear Engineering at UppsalaUniversity (program code KKI1). The work has been carried out in cooperation withForsmark Kraftgrupp AB. The topic studied deals with possible improvements ofefficiency at the planning department at block 2 in Forsmark i.e. FMP2.FMP2 plans and coordinates over 3,000 operations which is carried out during theannual overhaul of block 2 in Forsmark. Inspections, fuel replacement and repairs areincluded in the annual overhaul.

Asymptotically flat spaces are widely studied because it is one natural way of describing an isolated system in general relativity. In this thesis we study what happens to the Lanczos potential at spacelike infinity in such spacetimes. By transformations of the Weyl-Lanczos equation, we derive expressions for the limiting equations on both the timelike unit hyperboloid, and the timelike unit cylinder. Finally the Newman-Penrose formalism is used to get a component version of the equations..

First-year students at Linköping University have developed a prototype that graphically visualizes a medical record in a new way. The customer of that project was the Department of Biomedical Engineering at Linköping University. They now want a usability evaluation to be performed of the prototype. The prototype is to be used by employees in the public health care and is supposed to be used on a small portable unit with a multi-touch interface. For this reason the prototype will be used as a complement to existing systems when the users work near the patients.

The aim of this study is to find a method to incorporate the energydemand of a building in the investment cost estimate.The study is based on an actual apartment block. The significant energyaspects are identified, and changed to more energy efficient options.These are then simulated using the energy calculation program VIP+.The calculated energy need is used in the investment cost estimate, andthe simulated alternatives are compared in regards to their economicalprofitability.Depending on the focus, different alternatives are the most advantageous.Since this study aims to show which alternative is the mosteconomically profitable, the annual profit is the parameter of mostimportance. This means that individual measuring of heating and hotwater use is the recommended change of the original house. A changeof the windows to new ones with a U-value of 1,0 as well as 0,8W/m2K also results in a positive change of the annual profit comparedto the original house..

The aim of this project was to describe and to evaluate five small sewage treatment plants in the municipality of Laholm, Sweden, in order to investigate the treatment efficiency and to evaluate if effluents comply with discharge permits. The treatment systems were designed to treat effluents from 90 to 500 population equivalents. A report on the design and the present state of each sewage treatment plant has been made. This was made based upon previous documentation on water quality and by new sampling campaign as there were only a few previous measurements. Data has been evaluated and remedial actions proposed for those treatment plants that don?t fulfill discharge permits.

The annual cost of home care services of transport in Falun/Borlänge, is now at 31 million kronor. It is clear from previous research that it is possible to reduce these costs through a restructuring of the existing home-help service. The restructuring aims to have a higher proportion of older people, who are in need of care, to live in special accommodation, in order to reduce transport costs. Therefore there is a need for systems that allow home-help service to plan their operations in such a way that transport is working as efficiently as possible. Through better planning, there are profits to be done.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The general objective of this qualitative study is to analyse and describe what people with psychiatric disabilities write on their blogs about their encounters with social workers. The questions the study is aiming to answer are: How do people with psychiatric disabilities describe their encounters with social workers? Do the informants describe instances of paternalism and advocacy? How do the informants describe their sense of meaningfulness, comprehensibility and manageability? The study is based on a theoretical framework in which empowerment and sense of coherence (SOC) are the key elements, along with the concepts of paternalism and advocacy as well as meaningfulness, comprehensibility and manageability. The research data was collected from blogs on to the blog forum Psykiatrin.blogg.se ? psykiatrins Robin Hood (meaning ?the Robin Hood of psychiatry?).

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.