Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

The task to this thesis has been to create an application, Katana-databas 1.0, for analysing c-code. The generated output gets stored in a data structure which content in the end of the program run gets written in a textfile which gets used by Katana. It's a tool for reverse engineering, developed by Johan Kraft at Mälardalens institute.Katana-databas has got the following limitations. (1) It can only handle preprocessed files, meaning it doesn't contain any rows beginning with "#". (2) Only complete files can be handled.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

Denna uppsats beskriver Internet i Kina i allmänhet, från dess politiska bakgrundsmotiv och inledande grunder till dess nuvarande tillstånd av dynamisk ekonomisk infrastruktur och medel för folkligt politiskt inflytande. Tonvikten läggs vid för Kina unika aspekter, såsom partiinflytande över informationsutbytet, folkliga attityder till fildelning i ett samhälle som bara nyligen erkänt privat ägande samt effekter av kulturkrockar på nätet mellan västlig och kinesisk civilisation. Det argumenteras för att Kina i en framtid kommer att ha ett stort inflytande över cybermarknader och i beslutsfattande om Internets framtida utveckling, genom tekniska, ekonomiska och politiska medel. Slutligen resoneras att Internet i Kina har förändrat och kommer att förändra folkets mentalitet, så att det anammar västerländska tankemönster i liknande utsträckning som i angränsande länder, vilket banar väg för politisk pluralism..

A description and analysis of the sales process of ERP systems is presented; also the consequences for the parties involved are discussed. The chosen methodological basis is an inductive research design consisting of a case study based on interviews. The analysis of the empirical data is done with a proposed analytical framework. Based on the agency theory, the analysis is tightly knitted together with opportunism. There are three controlling factors: relationships (relationship marketing), contracts (principal-agent theory), and competition.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

Internationally most Internet trade related payments are performed with the use of a credit card based payment system on the Internet. Payment against invoice is still most common when trading over the Internet in Sweden. The security development, comfort and timesaving indicate that credit card based payment systems on the Internet soon will have a breakthrough in Sweden as well. The Swedish legislation concerning payment is neither especially extensive nor suited to electronic payments but to payments performed with notes and coins. When the legal effects, of a payment performed with a credit card based payment system on the Internet, set in is not fixed.

This paper aims to analyze if ground based air defence of the Swedish Defence Forces is sufficiently equipped to protect units serving abroad. The Swedish ground based airdefece has its roots in the era of the cold war but the focus of Swedish Defence Forces has shifted from defending Swedish territory to peace keeping and peace enforcement in foreign countries. First I will take a look at the base factors for ground based air defence units serving in a peace keeping or enforcing mission and then use this to define what abilities you would like to have in a ground based air defence system. Finally I will compare these abilities whit the abilities of the ground based air defence systems that are in use whit the Swedish Defence Forces.My conclusion is that the question can´t be answered on a generel level but every mission has to be analyzed individualy.The author of this paper is Cadet Tobias Jönsson studying at the The Armed Forces Technical School to become an officer in the Swedish Defence Forces..

This master thesis is an analysis of how the amount of health centers per inhabitant has changed since the Swedish government implemented a new health care reform in 2010. The reform implies a free choice of health centers in the Swedish regions and opens up the market for private firms. The purpose of the thesis is to study the effects of the different financing systems toward the health centers in the regions. The models are based on theories of the need of health care. Two of the independent variables which are studied are income and age.

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

This thesis describes the new construction of a small house and it includes studies of three heating systems: geothermal heating, district heating and pellet. The purpose of this thesis is to project a small house which can manage Building Regulations, BBR conditions and then examine three possible heating systems for the small house. This thesis is a literature study which gives an understanding of the heating systems technical structure, properties and costs. An empirical study completes the literature study by giving a deeper understanding of district heating costs and pellet costs. The empirical study contains two interviews, one of which was conducted in a district heating corporation and the other interview was conducted in a pellet corporation.

Denna rapport är ett inledande steg mot att förbättra arbetsmiljön för svetsare vid påsvetsning med Uddcomb Metoden i massakokare. Syftet med rapporten är att analysera problemet med värme och dålig luft samt förklara hur och varför problemet uppstår. I arbetet ingår även att ta fram olika lösningar för att slutligen hitta ett komplett system för ventilation och kylning. Den föreslagna lösningen består av ett integrerat kylsystem och ett koncept med mindre fläktar, kallade torpeder, som monteras på arbetsplanen vilka driver ut varm och smutsig luft snabbare ur kokaren. Den föreslagna lösningen utreds även ur ett ekonomiskt perspektiv.