The thesis has been carried out in cooperation with Master Flow AB, Västervik owned by the EWEBE Group. The company produces and sells hot runner systems that are tailor made for the customers.The problem that MasterFlow AB has encountered is in the construction of complex hot runner systems in SolidWorks. With several different lengths, fronts and endcaps that builds the nozzles of the hot runner systems, is affecting the problems for MasterFlow AB. The purpose of this work is to automate the design of hot runner systems so it does not overload the CAD-system SolidWorks.To gain an understanding of the problem, there have been several studies and observations at the company, where the focus has been on how the work is done with the design of hot runner systems. By using help from the corporate management, enough information has been collected to find a solution to these problems.The implementation of design automation has been based on a flowchart that was created.

För att åstadkomma samarbete mellan agenter i dataspel har utvecklare under lång tid använt sig av traditionella AI-tekniker såsom skriptning och tillståndsmaskiner. Dessa tekniker har dock ett flertal problem som gör att alternativa tekniker där samarbete istället evolveras fram blir intressanta att studera. I detta arbete har effekterna av egenskaperna begränsade synfält, brusig indata samt hinder på evolution av samarbete med en sådan teknik, Multi-Component ESP, utvärderats.En experimentmiljö utvecklades baserad på samarbetsproblemet CMOMMT. I denna miljö utfördes sedan fem olika experiment där respektive egenskap först testades enskilt och sedan alla tre i kombination. Resultaten av dessa visade att ingen av egenskaperna enskilt har någon effekt men däremot att kombinationen av alla egenskaper har en stark negativ effekt på evolutionen.

Modelica is a multi-domain and equation-based modeling language. Modelica is based on object-oriented principles and non-causal modeling. The language is constructed to facilitate reuse and decompose models. The models and the modellibrary can modified to design a new nonlinear components.Object-oriented modeling is an excellent way to analyze and study large complex heterogeneous physical systems. The object-oriented modeling approach build on reusing and decomposition of models and non-causal modeling.Modeling physical systems often leads to a DAE system with index 2 or 3.

This thesis evaluates the environmental performance of six different fish farming systems. The thesis is part of the network group ?Hållbar fiskförsörjning I Stockholms län? (HFFS) which tries to increase the domestic and regional production of fish in Stockholm and move to a more sustainable supply in the Stockholm county. Two of the chosen systems; pangasius from Vietnam and salmon from Norway are delivering a substantial part of the fish consumed in Stockholm today, although they are very different when it comes to system characteristics. One system, arctic char with conventional feed, is produced in a fairly small scale in the north of Sweden, while the three remaining systems are viewed upon as possible options to supply Stockholm with fish in the future.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

Requirements engineering is a widespread topic in the research field of informatics. However, there is little research regarding lack of requirements documentation and how it is perceived. The same applies for how requirements engineering in retrospect can be implemented. This is a debated issue on blogs and forums but it has not been reflected in the research area.Therefore, this study concerns research questions regarding how the developers, testers and requirements analyst experience the lack of requirements documentation and how requirements engineering in retrospect can be implemented.To answer these questions, data collection has been conducted through qualitative interviews with individuals affected by this problem in their everyday work.This study has provided an explanation of how the problem is perceived and what the consequences are, both direct and indirect. The impacts are divided into three categories and are presented as, emotional consequences, system implications and consequences regarding re source consumption.

Requirements engineering is a widespread topic in the research field of informatics. However, there is little research regarding lack of requirements documentation and how it is perceived. The same applies for how requirements engineering in retrospect can be implemented. This is a debated issue on blogs and forums but it has not been reflected in the research area.Therefore, this study concerns research questions regarding how the developers, testers and requirements analyst experience the lack of requirements documentation and how requirements engineering in retrospect can be implemented.To answer these questions, data collection has been conducted through qualitative interviews with individuals affected by this problem in their everyday work.This study has provided an explanation of how the problem is perceived and what the consequences are, both direct and indirect. The impacts are divided into three categories and are presented as, emotional consequences, system implications and consequences regarding re source consumption.

This study aims to examine the effect management control systems have on which goals health centers prioritize. The management control systems of one privately owned and one publicly owned health center have been studied through a qualitative case study. Robert Simons (1995) framework with four levers of control (diagnostic control systems, interactive control systems, belief systems and boundary systems) has been used to structure the study. For both health centers we found a conflict of interest mainly between the diagnostic control system and the beliefs system, where the diagnostic control system is biased towards quantitative goals and the beliefs system is mainly biased towards qualitative goals. However, despite the unbalanced levers of control the studied health centers have been able to reach a well functioning compromise between quantitative and qualitative goals..

This thesis deals with the goods classification of the Nordic alcoholmonopolies, viz. Alko in Finland, Rúsdrekkasøla Landsins in the FaroeIslands, Systembolaget in Sweden, Vínbúðin in Iceland, andVinmonopolet in Norway. The focus of the study is the web pages of thecompanies (as they appeared April 10th 2011) and the printed pricecatalogue of Alko, from which information on class division has beenexcerpted. The emphasis lies on the division into product groups and theinformation about origin. Within these facets, which partly overlap insome of the classification systems, the principles of division and thehierarchical relations between classes are studied.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

This degree project includes both a theoretic component and a practical component within the graphicprofiling domain. Literature on graphic design has been studied for the theoretical part and the achievedknowledge has been used for the practical part. The project has been to produce graphic materialfor ?Rookiefestivalen? in Hultsfred.In modern society it is important for a corporation to distinguish itself from others by using a graphicprofile. Through using a graphic profile the company can have an affect on how it is perceived byothers.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

The task of constructing a transmission has been provided to us by Digital Engineering, which is a company located in Hovmantorp. After meeting with Digital Engineering we started immediately with the brainstorming to find different ideas with pen and paper. After having presented a number of concepts for the company, we had finally chosen a winner. For the gearbox to be able to work in a good way the tension must never exceed the strain limit of the material. A prototype of the gearbox was produced by TKB Modell.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.