This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

This master thesis investigates how the county administrative boards communicate the regional risk and vulnerability analyses to municipalities in Sweden. Information has been gathered through a survey and through a case study involving three county administrative boards. The results revealed that there are possibilities to improve or develop the communication in all the county administrative boards. The information channels are often written or web based, these channels promote one way communication rather than a dialog. The thesis gives suggestion on how to work out a strategy for a more effective communication, the case study also gives ideas on how a county administrative board can work with communication..

Denna rapport behandlar den marknadsinriktade Requirements Engineering (RE) processen. Allt fler företag väljer idag att implementera standardsystem i sina verksamheter. Den situation som ett standardsystem utvecklas i är annorlunda jämfört med den som ett kundspecifikt system utvecklas i. Detta innebär att den traditionella RE-processen inte är anpassad till dessa nya förhållanden.Syftet med denna rapport är därför att utreda vad som kännetecknar en marknadsinriktad RE-process som stödjer kravhanteringsarbetet vid utvecklingen av ett standardsystem. Rapporten avser även att undersöka hur RE tillämpas av marknadsinriktade systemtillverkare i praktiken.

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

This paper describes how files and information can be shared in organisations and workplaces. We studied and compared the traditional file sharing in Microsoft Active Directory and the Social file sharing that comes with Microsoft SharePoint Sites. We used qualitative studies based on interviews with system administrators, management and by our own observations to acquire the necessary data. Using independent research, we were able to analyze the data and show the general difference between the traditional and the social file sharing systems. Social file sharing enables the user to easily store and share files in a flexible online environment.

Application Lifecycle Management (ALM) is a genre of computerized systems which allows system development corporations to efficiently and more easily manage, maintain and handle the applications lifecycle. These ALM systems have a wide variety of tools which can be integrated to enable and support collaborative work, while they act at the core of the organisation. Todays ALM systems support flexible system development methods throughout the entire development process. This paper focuses on a case-study of a Swedish business- and technology corporation and their use of two ALM systems with an aim to unravel the differences between these systems and their functionality to serve as a basis for decision making regarding their utilization of best practice with their ALM-Systems. Meanwhile we studied their approach to ALM systems to see if they were using them according to the initial idea of ALM systems.

This report presents a method for modelling a computer system from a security perspective. The questions that are going to be treated are:? What defines a secure system and how does the company relate to these factors?? What are the threats today based on hardware/software, human factors and company routines/policies?? What measures should be taken for the organisation to reach a higher level of security for their systems?? How do we develop a method for classification of security and what components should it contain?? What changes are reasonable and necessary with the respect to the company?s resources?The report has been done through interviews and analysis of existing systems on Fla?kt Woods AB. From analysis of material, the aspects judged relevant to the subject and to the company?s needs, have been compiled to a document.

When performing a QRA you have to consider a number of accident scenarios. How many scenarios you choose often determines the time and resources needed to perform the QRA. The report investigates the possibility that a QRA can be performed using only a few representative scenarios. Further it presents a discussion on how these scenarios should be constructed..

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

In almost every workplace today IT-systems have strong and significant roll in theeveryday work. It is therefore important that the systems have a good functionalityand that they work as an aid for the users. This thesis aims to study the systems atthe company Telge Nät and to analyse them from a usability perspective. By using thisperspective it has been obvious how difficult it is to make improvements on usability,once the system is in place. Even other larger improvements of the systems aredifficult to make at this stage and this is something that the users are aware of.

I Sverige genomförs varje år offentliga upphandlingar till ett värde av ca 500 miljarder kronor. Alla offentligt finansierade verksamheter måste följa lagen om offentlig upphandling och den formella upphandlingsprocess som lagen specificerar. Lagen är allmänt formulerad och anvisar en process där fokus ligger på förarbete och matematisk utvärdering.Cognitive Systems Engineering har vuxit fram utifrån insikten att effektiva processer kontinuerligt behöver använda såväl feedback och feedforward för att uppnå sina mål. Typiska tillämpningar är dynamiska, tätt kopplade processer där dessa behov är tydliga, men CSE som ramverk är generellt definierat och bör gälla även för en beslutsprocess på organisationsnivå. En CSE-analys har potential att förtydliga funktionella faktorer som tillåter upphandlare att genomföra effektiva och ändamålsenliga upphandlingar.I syftet att testa ovanstående hypotes genomfördes en fallstudie av Linköpings Universitets upphandling av företagshälsovård 2008.

This study investigates communication and data in information systems. The paper deals, more specificly, with communication in a CRM-system implemented in a Swedish-founded company in Beijing, China. It discusses cultural, political, linguistic and gender based dilemmas that can arise from the use of a CRM-system in an international and bilingual environment. Fifty-nine interviews were conducted in Sweden and in China, either in Swedish or English. The result of this study shows that communication in the information system is affected by factors, that are not originated in technical shortcomings of the system, but rather from cultural, political, linguistic and gender based pre-knowledge among individuals.

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..