When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

Background: Several accounting scandals have caused a development from rules-based to principles-based regulation. Swedish municipalities follow the principle-based recommendations issued by RKR (The Council for Municipal Accounting). An explicit requirement of component depreciation has been introduced prior to 2014. The principles-based regulatory framework raises some choices regarding the introduction and demands that professional judgments are made. There is some risk that comparability decreases.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

Ericsson develops a new stripline directional coupler. Its design is described in appendix B and differs from the directional couplers Ericsson uses in current products. The new directional coupler will be used for transmission power measurement in future UMTS 3G base stations.The most important parts of directional coupler theory are presented. It is necessary to study this theory to understand how the coupler works and how it should be designed to get good performance.Optimal directional coupler termination component values to get high directivity and broad directivity bandwidth have been investigated.The trim screws trim ranges have been studied.A simple analysis of serial production performance when termination component tolerances are taken into consideration has been done.The resistance components reactive (inductive/capacitive) characteristics at 2.14 GHz have been analyzed.The directivity performance limitations of the directional coupler, when Ericsson?s band pass filter is connected, are investigated.Design changes leading to better performance are proposed.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.

To introduce a standardized component assortment takes a lot of effort in order to make real cost savings. The rationalization effect itself is important, but perhaps even more important is to state the aim of the standardization efforts in a well-defined way. How can an organization assure that they are working in a proper way? How do they know that their efforts are being interpreted into the whole organization? And, how do they know that the standardization efforts actually save money? Different components differ heavily e.g. in technical complexity and quality issues.

This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

A rhetorical analysis of the educational interactive film ?Riskprofilen?, produced by the Swedish Civil Contingencies Agency (Swedish: Myndigheten för Samhällsskydd och Beredskap). This essay uses the theories and methods of Procedural Rhetoric, as described by Professor Ian Bogost, and Visual Rhetoric, as described by Professor Brigitte Mral to analyse the interactive and visual component parts of the artefact, and compares them to the intended purposes of the artefact as stated by documents pertaining to its creation, found to be those of educating the public; marketing the agency; and driving traffic to its webpage. The artefact is through analysis found to fulfil the purposes of marketing the Agency and of likely increasing traffic to the website upon which it is hosted. Regarding the primary, educational purpose this analysis finds that the artefact does not teach a user the accident-avoidance strategies it claims to do, but is dependent upon further materials..

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

In recent years, the penetration of new players on the telecom market hasdrastically increased the work pace, affecting both design and production. Inthis report the technical and economical potential of a DC/DC converterplatform is investigated, in order to shorten the time of the design process.This is done in comparison with the present discrete type designs. PowerIntegrations offers a product, the DPA-Switch?, enabling this.By developing a wide DC/DC converter platform based on the DPA-Switch?,many advantages are gained. The component count is decreased by up to48 % and the yield increases by up to 2.9 % which in all yields a costreduction by up to 43 % or ?390 000 for 100 000 manufactured units.

Saab Component Maintenance in Linköping, Sweden, offers maintenance, repair andoverhaul (MRO) services for civilian and military aircraft components. Lately, thedepartment has struggled with slow throughput rates, despite various counteractingattempts. Studies show, that large parts of the delays derive from the logisticsdepartment where goods arrive and dispatch. Therefore, Saab wants to carry out anextensive analysis of the department in order to further investigate what is causing itsslow throughput rates.The thesis begins with extensive mapping over Component Maintenances whole valuestream to find out how departments interact with each other and which roleindividual departments have in the total supply chain. Out of 13 000 different partnumbers, components were divided into five product families.

This thesis deals with the compatibility between analysis software Revit Structure2012 and Robot Structural Analysis 2012. The purpose is to become more aware ofinformation management models to be compatible across different softwareapplications. The structural model is made to be optimal for the compatibility of othersoftware Aim is also to gain an understanding of the transferring methods that exist,and which method is most convenient to use and to examine whether the methodswork in practice. Objective of this project is to make the modeling processtime-efficient for constructors. Models do not need to be structured in severaloccasions in different software; it only needs an optimal model that transfers properlybetween software.The method used in the thesis consist cases where the transferring process isexamined.

För att åstadkomma samarbete mellan agenter i dataspel har utvecklare under lång tid använt sig av traditionella AI-tekniker såsom skriptning och tillståndsmaskiner. Dessa tekniker har dock ett flertal problem som gör att alternativa tekniker där samarbete istället evolveras fram blir intressanta att studera. I detta arbete har effekterna av egenskaperna begränsade synfält, brusig indata samt hinder på evolution av samarbete med en sådan teknik, Multi-Component ESP, utvärderats.En experimentmiljö utvecklades baserad på samarbetsproblemet CMOMMT. I denna miljö utfördes sedan fem olika experiment där respektive egenskap först testades enskilt och sedan alla tre i kombination. Resultaten av dessa visade att ingen av egenskaperna enskilt har någon effekt men däremot att kombinationen av alla egenskaper har en stark negativ effekt på evolutionen.

This degree project includes both a theoretic component and a practical component within the graphicprofiling domain. Literature on graphic design has been studied for the theoretical part and the achievedknowledge has been used for the practical part. The project has been to produce graphic materialfor ?Rookiefestivalen? in Hultsfred.In modern society it is important for a corporation to distinguish itself from others by using a graphicprofile. Through using a graphic profile the company can have an affect on how it is perceived byothers.