This thesis provides a comparison of the old Planning and Building act (PBA) from 1987 with the new PBA, which entered into force in May 2011. The essay consists of a descriptive part that presents the regulation of both laws. The new PBA consists of several differences compared to previous regulation. This thesis will, however, primarily be centred around the regulation regarding building permit appeals and the possibility of building permit, to gain legal force.In the old PBL, there were no regulations that result in a building permit decision could be made effective. Instead, a building permit could, long after the decision had been made, be over-challenged.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

This term project addresses how to develop construction drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction drawings. The supervision is created as guide for similar projects.The construction drawings is a complete construction guide, hence it includes all construction drawings. In addition, a room description and a general description is included..

Bakgrund: Omkring 25000 individer i Sverige lever idag med en stomi. Stomin kan ha en påverkan på den sexuella hälsan då den kan orsaka problem vid sexuella aktiviteter. Den kan också hota vuxenrollen på grund av förlusten av att inte kunna konrollera tarmen. Sjuksköterskans uppgift är att ge vägledning, utbildning och information om sjukdomsförloppet och den sexuella hälsan. Att prata om sexualitet inom sjukvården kan dock vara problematiskt då det är ett känsligt ämne för både patient och sjuksköterska.Syfte: Att beskriva individers upplevelser av sexualitet i samband med stomi.Metod: Litteraturöversikten baserades på tio vårdvetenskapliga artiklar som hämtats från databaserna CINAHL Complete, PubMed, Medline, Academic Search Complete och DOAJ.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

This master theses deals with different methods for automatic tuning of the existing controller for external axis. Three methods for automatic tuning have been investigated. Two of these are based on the manuell method used today. The third method is based on optimal placement of the dominant poles. Different sensitivity functions are important for this method.

In order to attract talented consultants, Sigma, a consultant company, wanted an online game for recruitment. In the game, potential employees? skills could be tested to determine whether they are qualified for the job. This paper presents a general technique for creating such a recruitment game. The report generalizes the recruitment game to a level-based game for the web, where a player should be able to progress from one level to the next by solving a given problem.

Today more and more municipalities interact across a wide range of sectors. The reasons tostart interacting are varying and for those who succeed with this form of work, there arebenefits in terms of efficiency and knowledge exchanges. But are the reasons that interactalways obvious? Sweden currently has 290 municipalities of varying size and allmunicipalities have basically the same mission, to deliver services to its residents.Information technology allows municipalities to digitize much of the workload, but theintroduction of the technique is not without problems. For small municipalities, there are greatdemands to deliver reliability and support for their internal and external services.

Bakgrund: Omkring 25000 individer i Sverige lever idag med en stomi. Stomin kan ha en påverkan på den sexuella hälsan då den kan orsaka problem vid sexuella aktiviteter. Den kan också hota vuxenrollen på grund av förlusten av att inte kunna konrollera tarmen. Sjuksköterskans uppgift är att ge vägledning, utbildning och information om sjukdomsförloppet och den sexuella hälsan. Att prata om sexualitet inom sjukvården kan dock vara problematiskt då det är ett känsligt ämne för både patient och sjuksköterska.Syfte: Att beskriva individers upplevelser av sexualitet i samband med stomi.Metod: Litteraturöversikten baserades på tio vårdvetenskapliga artiklar som hämtats från databaserna CINAHL Complete, PubMed, Medline, Academic Search Complete och DOAJ.

Our bachelor thesis is a visualisation made in 3D-graphics of how the horserace track in Tingsryd perhaps will look like in the future, complete with a miletrack, steeplechase, and other horserace courses. Today, the race track is only in it?s building phase. The inner field-group in Tingsryd needed presentation material to show their eventual sponsors, so they contacted us at Media Technology, and we instantly decided to give their idea a try..

The digital flexor tendon sheath (DFTS) is an important anatomical and functional structure in the horse. Disorders of the DFTS can result in devastating consequences for the horse. During the last decade, the possibilities to diagnose and treat disorders of the DFTS have been argumented. The main purpose of this paper is to describe the technique of tenoscopy and it's applications. The aim is also to review the anatomy of the fetlock canal, the differnet types of tenosynovitis, proximal annular ligament constriction and to describe the ultrasonographic examination of the DFTS..

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

There is an old saying, that after Epaminondas nothing was ever the same again. In this thesis I will focus on three questions: "Epaminondas the man." Who was he? "Epaminondas the general." How did he change the technique of warfare that made it possible to beat the Spartans? "Epaminondas, founder of cities and wall-builder." How did he build the walls around the cities he initiated, that made them resist enemy attacks for many years to come?While seeking the answers to yhese questions I will make a contextual analysis to get the historical background to all the phenomina involved..

The purpose of this study is to show the technical building requirements for modern arenas inSweden. The study will also create an understanding of how the requirements affect theSwedish football arenas which are affected by the regulations valid from 2014. As one of theSwedish football arenas there is Örjans Vall located in Halmstad. The aim of this study is todevelop alternative solutions regarding the technical problems Örjans Vall is facing 2014,when the new arena requirements for ?Svensk elitfotboll? are taken into use.