The purpose of this thesis has been to build a parameterized model of a prototype motor in the program Solidworks, to use in future optimization of aspects of effectiveness and weight. The result were two models. The first model were one minor part of the whole design in 2D, to be able to optimize and study the minor part with a faster loss simulation. The second model was the whole design in 3D. The whole model were done with the three programs Solidworks, Comsol and Matlab.

Background: In 1998 it was stated that Swedish municipalities would report the pension liabilities according to the mixed model where the pension liabilities before 1998 was moved from the balance sheet. The mixed model has been criticized by economists for not showing the total pension liabilities. To remove some of the liabilities in the municipalities balance sheets means that the solvency improves. Some municipalities have decided to go against the municipal accounting law and recognize all of the pension liability as a liability according to the full funding model. When two accounting models are being used the comparison of the municipalities' financial statements is much harder.Purpose: The main purpose of this study was to study the reason why some municipalities apply full funding model rather than the mixed model.

The purpose of our essay is to examine if variation exists in the way that auditors try their independence, this so called analysis-model. We will suggest some factors that influence the way auditors practise the analysis-model. The institutional theory predicts no differencies since the normative pressure could be expected to be severe. But we found that among other things people?s qualifications, personalities and audit firm?s size and age influence the way auditors try their independence.

AbstractInterest in the subject appeared from real events. We seemed to discern a trend in society. Wehave noted that the amount of social enterprises to a greater extent is formed in Sweden.Companies like GodEl, Postkodslotteriet and DEM Collective are typical illustrations ofcompanies included in the category of social enterprise. It seemed as socially profiledcompanies is the new generation companies. The purpose of this essay is to make aninventory of possible competitive advantages that arise from social branding.

Background: Knowledge management is a concept that is considered of increasing importance in the developing knowledge society. Previous research in the area has to a large extent been based on large multinational companies. Purpose: The thesis aims to clarify how middle-sized Swedish management consultancy companies work with knowledge management. The thesis intends to use existing theories about knowledge management to explain the effect of size and area of operation on management consultancy companies? knowledge management.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

Multi-branch companies are facing many challenges in order to become successful. Competitive advantages can be gained through a unified strong brand, standardised products and economies of scale. This normally calls for centralisation. On the contrary is decentralisation, which is said to improve work motivation and local market orientation, which are also competitive advantages. The focus of this thesis is to study how local branch managers want their companies to be structured in accordance with this dilemma.

Through geopolitical theory this thesis explores how conflicts within states can be read and understood according to an analytical model determining one or several possible causes for the conflict.  The model is created by the author and reflects geopolitical theory by giving three possible explanations to an intrastate conflict: culture, economy or territorial construction. The aim of the thesis is testing this model on two selectively chosen case studies ? i.e. two intrastate conflicts ? namely: the upcoming referendum in Scotland and the terror attack at Tiananmen Square in China.

Banks find themselves at a highly competitive market where it is important to achieve high customer satisfaction if they want to attract customers and stay competitive. Some studies suggest that the gap between customer expectations and perception within the five quality dimensions influences the customer satisfaction. With SERVQUAL the authors of this thesis have investigated the suggested relationship and have discovered no indications of a relationship between the gap and customer satisfaction. Instead the results indicate that there is a relationship between perceived service and customer satisfaction. The thesis also indicates that the most important quality dimension for the bank customer is reliability.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

The work with this report has been focused on developing a methodology model for control at purchase. The methodology model covers parts classification, dispatching systems, batch shaping and more. The aim with the methodology model is that it will be used as an aid for a cost effective material planning to increase the value for customer.The work covers also a description of the present situation and the purchase process at Company X. Six parts have been applied, two from each class (A, B and C), in the methodology/model. The parts that have been applied are included in the flow between Company X and their supplier Company Y.Data have been collected trough literature studies, interviews and the company?s business system.

This essay answers the question: How can a manufacturing business fulfill the information demand in the processes; purchasing, production, warehousing, order and delivery?The question has been answered through different kind of studies, such as literature, documents, Internet search, interviews and observations. The essay is written from a hermeneutic point of view and by using qualitative research. The result has been validated by two different manufacturing businesses.A simple information logistic model is the result of a comparison made between theory and empery. The aim of the model is to describe how a manufacturing business can fulfill the information demand by using different methods.

This essay examines how three big Swedish newspapers depicts e-sports and computer gaming and how the depiction change during 2000-2013. The study will also examine whether e-sports is being portrayed as competitive sport. The purpose is to investigate which attitudes that can be identified towards computer gaming and its culture in major newspapers such as Aftonbladet, Dagens Nyheter and Svenska Dagbladet and how these attitudes eventually changed over time. The sources that will be used in both the quantitative and qualitative analysis are based on web articles, mainly because the paper editions does not provide much, if any, information about computer gaming and e-sports and also because of the convenience of being able to quickly find articles to study. Results indicate that computer gaming is being depicted in a clear negative fashion during 2000-2006, and that the depiction of e-sports is somewhat positive but not as glorifying as for the years 2007-2013. During this period, there is a apparent tendency of e-sports being introduced to readers who are unfamiliar with the gaming culture. As for the attitudes towards computer gaming, the depiction is still somewhat negative, mainly because the debate about computer games and violence was revived because of several acts of violence in shape of school massacres and mass murder.