The information market is constantly changing. With new and improved information technology more people get access to more information faster. However, the number of people educated to handle information also increases. Business intelligence has for a long time been a well-known tool for companies to be competitive. Because of the increased access to information the competition between companies has intensified and more people have become aware of the advantages of business intelligence and how it can help them compete.

An increasing number of automotive supplier companies are investing in Central and Eastern Europe (CEE) in order to gain cost advantages. This has happened in a rapid pace since many of these countries did not have any foreign direct investments (FDI) at the turn of the century. The problem now is for how long these countries will be able to maintain the low costs. One purpose was to create a model of country advantages for automotive supplier companies when relocating further production to CEE. This dissertation was written in cooperation with the Trelleborg Group.

The food industry is an important part of the Swedish economy, It is the fourth largest industry in Sweden in terms of number of employees and production value. Due to the increasing globalization, the Swedish food industry faces new conditions and challenges. Through the Swedish membership in the European Union in 1995 a whole new era of competition began for the Swedish agriculture and food industry. Markets that previously were closed now opened. In retrospect, it should be noted that the Swedish food industry managed well.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

In June 2013 a debate concerning the consumers? right to a label of origin on food packages was held in the Swedish parliament (www, Riksdagen, 2014). The debate was sparked by some food scandals where labelling was falsely used, claiming something that was not true ? the horse-meat scandal, frozen strawberries infected by Hepatitis A, pork sold as beef, etc. These cases were not only wrong in terms of food safety, but also fraudulent and threating consumers? right to fair origin labelling.

The purpose of this study was to evaluate if verbal encouragement had any influence on handstrength measurements. Twenty subjects participated in the study, all women between the age of 20 and 62 years. A standardisation of testing conditions and verbal encouragement were designed. Three measurements were conducted during two days using T.K.K 5401 Grip D. First there was a trial set, and then Test 1 (without verbal encouragement) and Test 2 (with verbal encouragement) were conducted.

Purpose:Only 60 percent of the newly started companies survive their three first years. The purpose of this report is to obtain a deeper understanding regarding how newly started companies work with their positioning and if there are some kind of a relationship between positioning and the survival rate of newly started companies.Research questions:Do newly started companies know what position is? Do they incorporate positioning in their day to day marketing?Approach:We have used a hypothetical-deductive way of reasoning and a qualitative study to gather the information needed. We have through interviews asked our questions to six newly started companies in three different cities.Findings:In our essay, we reached the conclusion that newly started companies do not spend sufficient time or energy on positioning their products. The companies interviewed only market their product as a good product.

AbstractProblem-based learning (PBL) was from the beginning developed in medical school, but is today used in education in other programmes as well. Investigations about PBL have been conducted in different disciplines and there is also metastudies. In this paper, a metastudy of 8 bachelor degree papers have been conducted. The questions answered were: which methods were used to investigate PBL in primary, lower secondary and upper secondary school,which advantages were found in working according to the PBL method, which disadvantages were found in working according to the PBL method and did teachers and students views about advantages and disadvantages about PBL as a method differ and if they did, how? The results showed that mostly qualitative methods were used to investigate the PBL as a method, mostly abilities of social qualities and independence were trained in working according to PBL, a disadvantage was that working according to the PBL method was considered more resourse consuming than traditional teaching methods and teachers and students views about PBL did not differ considerably.

The purpose of this report is to analyze the advantages of using programme software to monitor masshauling instead of using the conventional method. A comparsion between different programs will also be conducted in an attempt to determine the most affordable. This report is written for NCC Construction AB to help them choose a software most fitting for future projects.The report is based upon literature such as information taken from the developers website, existing reports with similar context, interviews with sellers of the software and interviews with people working in the building sector.The result of this report shows that there are several advantages with investing in a software that helps the management of a project and that it is something that should be taken under consideration instead of the existing method. Topcon is a clear favorite following the inquiries comparisons as done, when they deliver a complete system and not only a supplement to the current approach. Scanlaser are just in the beginning of its development, and is so far only out with an early version of the software, while Topcon has been brought further in development and therefore has more features in the program.

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

Abstract Semester and year: Spring, 2008Writers: Victor Andersson and Filip ForslundTutor: Thomas HelgessonProgram: Marketing program, Halmstad University - School of Business and EngineeringTitle: Differentiation from a consumer perspective - How important is differentiation from a consumer?s perspektive when choosing a residence? Presentation of problem: How important is differentiation from a consumer?s perspective when choosing a residence?Purpose: The purpose is on basis from previous theories on the subject to describe what kind of differentiating that from a consumerperspective is the most important when choosing a residence. Key words: Differentiation, brand, apartment market Methodology: This thesis is built on an qualitative method, where eight open individual interviews have been made. Our choice of respondents was based on what kind of respondents that could give us the most accurate information on the subject which we based on relevant variables. Theory: The framing of the theories is based on a marketing perspective within the area of differentiating and focuses on how companies use different tools to differentiate their offer to create Competitive advantages.

Abstract Semester and year: Spring, 2008Writers: Victor Andersson and Filip ForslundTutor: Thomas HelgessonProgram: Marketing program, Halmstad University - School of Business and EngineeringTitle: Differentiation from a consumer perspective - How important is differentiation from a consumer?s perspektive when choosing a residence? Presentation of problem: How important is differentiation from a consumer?s perspective when choosing a residence?Purpose: The purpose is on basis from previous theories on the subject to describe what kind of differentiating that from a consumerperspective is the most important when choosing a residence. Key words: Differentiation, brand, apartment market Methodology: This thesis is built on an qualitative method, where eight open individual interviews have been made. Our choice of respondents was based on what kind of respondents that could give us the most accurate information on the subject which we based on relevant variables. Theory: The framing of the theories is based on a marketing perspective within the area of differentiating and focuses on how companies use different tools to differentiate their offer to create Competitive advantages.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

 The purpose of this study is to examine how individuals' social capital can affect the opportunities for finding a job. That is, what benefits social contacts can provide in the hunt for a new job. The main questions that will be answered throughout this study are:- Of what importance are social contacts when looking for a job?- What are the advantages and disadvantages that the respondents present with recruitment thru informal channels/social contacts?-What are the advantages and disadvantages that social contacts can provide in terms of personal recommendations when looking for a job according to the recruiters?The study is based on five qualitative interviews with mainly recruiters from various parts of the labor market. The collected empirical data that the study has yielded indicate that individuals' social capital of the highest degree is crucial for the opportunities they have to find a job.

The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and Competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.