Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

The purpose of this study was to investigate the connection between store layout and how it affects us as shoppers. We formed our research questions based on literature. The study was based on observations of shoppers without their knowing they were observed. We didn?t tell shoppers since the science of shopping says that shoppers pattern of movement is something that?s subconscious and if the shoppers had known it would have affected the result of the study.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

The purpose of this study is to investigate whether Karlstad City Fiber Network visual elements in the form of a pair of speech bubbles fit into the organization's holistic external communication and branding. The study examines whether Karlstad City Fiber Network image of the organization and the speech bubbles match the stakeholders view and how the visual elements are perceived and recognized by stakeholders. The theory associated with the study is theories of corporate visual identity, image, identity and branding and visual communication. These three elements are important to be aware of when a generation of an effective external communications. Qualitative interviews with employees at Karlstad City Fiber Network and Karlstad municipality has undertaken to give an idea of ??what the organization wants to achieve and what their opinions are.

AbstractTitle: A changing climate? A study on the changes of the communicativeclimate. Klimat i förändring? En studie om det kommunikativaklimatets förändring.Author: Anne BjörckAim: The aim of this essay is to study changes in the area of the communicative climate and link that to Karl Weicks thoughts on communication and change. Karl Weick is famous for his contribution to organizational theories and he is still very well used around the world and that is the main reason to why his theory is served as a base in this essay.Method: The essay has a theoretical base with elements of qualitative explorative research method.

In the medieval ruling catholic time the church walls was swarmed with programs of pictures with religious motives there the animal figures rich symbolics was significant first and foremost for the illiterate. Principally the inspiration comes from the antiquitys pagan world of fables and bestiary Christian world of symbols with the bible as the essential source. The essay describes six of the most common animal symbols who occur; dragon, the sneak in the Paradise, mouth of hell, lion, the fox as a preacher and the devil.To attain to a discussion about why just animals are used as symbols for human characteristics in the medieval church art instead for human beings as it's actually be about, I have studied bestiary and other literature about medieval churchpainting to get an understanding about the history of ideas about the thoughts of the time and about symbolics of animals, worth and how the Christianity have had an influence on the pictures.I have used Johannes Rosenrods church pictures from Tensta church in Uppland from 1437 as an exemplification but also mentioned other unknown painters who used similar animal codes and motives.It's plausible that the purpose of the animal figures was both religious and political, which was used by both the spiritual and the worldly authority so they could keep their dominance over the peasant. The figures was simple to read and remember and they made a deep impression on the people together with the sermon. The churchgoer get so to speak a sound- and image experience, a medieval reality who impress their world of ideas.When it's about the artistic formation of religious expression and characteristics it was undoubtedly a great advantage for the artists to use an animal code like a schemata.

The  change that has occurred during the past few decades concerning the development of electronic records, information technology and the constantly increasing quantity of information, have confronted the archival discipline with new challenges. In the digital world, the concept of ?record? has changed from representing something lasting and physical to something much more abstract and transient. The way to approach archival description has also changed, from focusing on the static preservation of archival records, to documenting the transactions of organisations, and to clarify operational processes. The discussion about the general purpose of the archival discipline, and its place in a changing world, has led to a new approach to archival description.

Quality is the key to a well executed product or service. The construction industry hasn?t highlighted the quality in recent times which have contributed to the construction industry receiving much criticism in the field. The public sees it as an offhanded industry where errors and delays are common.The reason for this is considered to be primarily the lack of time, constant pressure to reduce costs and skills and the ability to communicate between the parties about what the correct quality really means. The industry has begun to realize that it must start setting clearer standards and that there are great opportunities for improvement.This report will give Peab an opportunity to develop their quality work.

During the changes of time, the stipulations for the existence of books and libraries also change. With technical advances come new possibilities, and the option to publish literature electronically is one of them. The purpose of this Master's thesis is to answer the question how the advantages and disadvantages of electronically published literature is described and constructed. To further deepen the analysis these questions were asked: What aims are the electronically published literature said to achieve? Why are the electronically published literature said to achieve these aims? And who are favoured/disfavoured by electronically published literature? The analyzed publications are four Swedish library related publications: Biblioteksbladet, Dik-forum, Ikoner and Nya Ciceron.

Relationen mellan tränare och aktiv idrottande individ är en viktig faktor för idrottsrelaterad framgång. Många forskare framhäver dess vikt och menar att det ibland är den mest avgörande faktorn. Vidare är det bevisat att engagemang är viktigt för individens idrottsrelaterade prestationer.Syftet med undersökningen är därför att undersöka huruvida relationen mellan tränare och aktiv idrottande individ har ett samband med individens engagemang och om det föreligger skillnader mellan lagidrott och individidrott.Kvantitativ datainsamlingsmetod användes och undersökningen gjordes på 108 stycken (79 pojkar och 29 flickor) unga tävlingsidrottare i åldern 15-18 år. Undersökningen är en tvärsnittsstudie med frågeformulär baserat på tidigare forskning. Analysen gjordes med korrelationsanalys, både för totala gruppen av respondenter och på de olika idrottstyperna individuell idrott (n=55) och lagidrott (n=53) samt genom en multipel regressionsanalys.Resultatet visade på ett positivt, medelstarkt samband där en förändring i engagemang kan förklaras av en förändring i relation till 20 procent.

Due to the globalization today the competition in the market has in- creased and it requires flexibility and produce according to customer demand. In order to reduce the cost of wages industrial companies are now considering moving the manufacturing to low-cost countries. To keep up with the competition in the market without moving the manu- facturing abroad, Lean Automation was developed. The concept of Lean Automation is to reduce the perceived complexity with automa- tion and make automation available for new users and in new applica- tions.Haldex Brake Products are situated in Sweden and want to maintain the manufacturing of the automatic brake adjusters in the country. It is a product well-known and highly exposed to the competition in the mar- ket.

AbstractThe banking industry has during later years gone through several technological changes (Svenska Bankföreningen 2014). These big changes have led to several advantages seen both from a customer ? and corporate point of view. Advantages in easier usage, increased availability and more competition have made the banks more cost effective at the same time as the customer is being offered better prices. Even though the advantages seem to weigh over the disadvantages there are still those who thinks that things where ?better in the past?.

To achieve the goals that the government has put in place for equal opportunities in the labour market, the Swedish law is divided into two separate regulatory frameworks. One is positive action to promote equal opportunities and the other is the prohibition of sexual discrimination. Since males, despite the measures taken so far, still have a great advantage on the labour market, the law concerning equal opportunities has an exception from the prohibition of sexual discrimination, whose purpose is to promote the progress of equal opportunities, also known as preferential treatment. The regulations concerning preferential treatment allow the employer to hire a less qualified person from an underrepresented gender in spite of the presence of higher qualified applicants of the overrepresented gender. The purpose of this paper is to investigate the meaning and the application of preferential treatment as well as to give an insight to the argumentation around its application.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.