The purpose of this paper is to give examples of different ways of economic planning and calculation within agriculcture. My aim is to use a couple of them as an explanation of a case from reality. My choice went to budgetsimulation and balanced scorecard since those are best suited in this specific case. In the information retrieval I present different instruments of economic planning like theory of cost, budget and productcalculation. The budgetsimulation describes how to use the different methods in a long term economic planning. The balanced scorecard is also a model of longand short-term planning but besides the economy planning it?s also a reminder of your personal goals. In the model I have used a dairyfarm as a case.

Changes in the workplace have led to new ways of organizing and structuring organizations. Organizations? desire to increase competitiveness, efficiency and flexibility has resulted in new conditions in the field of human resources. The new conditions have also created new roles and changing responsibilities for those working within human resources.The purpose of this study was to investigate how the implementation of Ulrich's model for HR transformation can impact on the human resource departments managerial support to first-line managers in the municipality of Uppsala. Today the municipality of Uppsala organizes its human resources based on the Ulrich's model, which divides the work into the units service center, the expert unit and business partners.

In 2003 the parties in Sweden were invited to debate reforms of the Constitution. The purpose of this essay is to study the debate concerning reforms of the Constitution and identify values expressed by the parties. Moreover the goal of the essay is to connect the identified values to the three democratic ideals, which are; electoral democracy, participation democracy and deliberation democracy. This analyze is based on the idea analyze.The conclusion is that all parties have argued that the Swedish Constitution should be based on the democratic ideal of electoral democracy. However, the right wing parties have also argued for inflection of participations democracy and deliberation democracy in the constitution.

The aim of this essay is to examine if the attitudes and the experiences of Ability Grouping are the same on different levels of the school organisation.I have chosen to answer the following two questions:· Have the teachers, the students and the headmaster the same idea concerning the educational model at the school, that is, the pros and cons of Ability Grouping?· Does the intentions of the curriculum agree with this educational model?I knew what I thought about the educational model at the school that is the object of this essay, after spending ten weeks at it as a trainee, but I felt that I would be interesting to know what the people who are part of that system everyday think about it.In order to be able to answer my questions, I used both the qualitative and the quantitative method. I interviewed the headmaster and five teachers to find out what they thought about Ability Grouping. I also distributed inquiries to 70 students from 6th to 9th grade to get their point of view. In the theoretical discussion I explain the meaning of different conceptions that I use throughout this essay.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

The purpose of this study is to analyze the representation of masculinity of Mikhail Tereshchenko as painted by Alexander Golovin at the beginning of the 20?th century, and to connect masculinity to the values of dandyism. An iconological analysis, in the style of Erwin Panofsky, and literary research resulted in various findings. Dandyism could partly be seen as a reaction against the normative masculinity, or hegemonic masculinity stated by R.W. Connell.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This thesis should be regarded as an integrated research synthesis. The purpose has been to analyse how the literary sociologist Lars Furulands model the literary process correlates in relation to todays book market for fiction. The central problem has been: In what different ways can some of the main actors featuring in Furulands model of the literary process use, produce or provide copyright protected works of fiction which are electronically distributed? Three questions have been considered to penetrate this problem: In what different ways can to judge from some projects which have been carried through at common public libraries electronic works of fiction be provided to their presumed readers? What reasons could there be as it appears in a number of texts that four Swedish authors have chosen to disseminate their works of fiction by the aid of the Internet? Which main functions may, according to current research, be supported by electronic media in connection with editing and retail of fiction? During this study a picture of two quite disconnected processes of publication has materialized. These processes seem to proceed parallelly to each other, without any close contact, in a traditional respectively an electronic circuit.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

This essay discusses people's perception of what is important for their well-being where they live. The main aim has been to find out what factors in the outdoor environments of the city are appreciated and why they are valued positively. A comparison has been made between Uppsala in Sweden and Tarapoto in Peru to see if, and in that case what, differences can be found in the values of people. I chose to carry out a survey study that got a response rate of 57 persons in Tarapoto and 63 in Uppsala. The results show that there are some common basic values, but on the whole the outdoor environments are valued differently in the two cities. In short, the Peruvians value functionality, cleanliness, small distances to family and service, while the Swedes value a central location and short distances to friends apart from functionality and good service opportunities. Conceivable reasons for this might be for example different cultural prerequisits, material standard and climate. .