This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

Background: Documents and legislation inform us that parts of the public health service of Sweden, at a political level, aim to support people?s sexual health. Statistics show there has been an increase among young woman, seeking help for sexual pain during intercourse. The diagnosis that the media has come to observe lately is vulvar vestibulitis. In general there is a lack of knowledge about the existence of this state of pain and its causes, which impacts woman to get appropriate help and support in time.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Purpose/Aim: The aim of this study is to (1) analyze the amount of exposure disability sports get in Swedens biggest newspaper (Aftonbladet), (2) look at how Aftonbladet portraits disability sports and it?s athletes, and finally (3)  to see if there has occurred any change over time (during the last eight years). Material/Method: The first method used is a quantitative analysis to measure exposure.The second method is a quantitative content analysis which is used to analyze how disability sports are portrait.The third method is rhetorical and is also used to analyze how disability sports are portrayed. Main results: The study has shown that disability sports get very little exposure in Aftonbladet. The articles in the newspaper that cover disability sports are portrayed from a personal point of view without much focus on the athletes achievements regarding his or her sport.

My curiosity concerning what pupils read and write during leisure time led me to gather information using a quantative method. The study's aim is to investigate which reading and writing habits they have during their time outside school. A comparison was done of pupils at school year level 3 and level 4 in two different schools with the intention of investigating the influence of social background on reading and writing habits. 137 pupils filled in survey forms and thereafter the MYSTAT statistic program was used to process the information. The results point towards that the pupils read story books both more often and for a longer time than any other type of literature and that they read them often or very seldom.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by one hour?s pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand.

Business Intelligence (BI) is a competitive concept for enterprises to consider. The concept is based on the idea of using business data in order to effectively analyze activities within an enterprise in order to enhance decision processes in the organization.The purpose with this study is to help Akademibokhandeln AB to analyze what BI-requirements they may have, and to create a recommendation on what sort of BI-tool that would fit the enterprise's needs.The requirements analysis was conducted with the help of internal personnel. Four different tools on the BI-market have been examined, analyzed and compared: IBM Cognos 8 (IBM Cognos), Microstrategy 9 (MCST), Qlikview 9 (Qlikview), and SAP Business Objects BI (SAP BO). These tools have been compared with the help of two models (BRI and BCI) that is based on the BI-requirements analysis, with the cost aspect taken into consideration in the BCI-model.Using the BRI-model, the comparison results in a technical evaluation. Here, IBM Cognos gets the highest result just ahead of MCST and SAP BO.

ABSTRACT This essay is about traffic analysis of Web servers. The purpose is to investigate if companies analyse the traffic on the Web server and if they use this information to create more than simple statistic reports. The questions that we will answer are the following: ? How common is traffic analysis on the Web server among companies? ? Is the Web administrator limited in analysing the Web traffic, if the company has the website on a Web hotel? ? Does the company uses the results they get from analysing the traffic on the Web server for updates and changes on the Web page? To answer these questions we made a questionnaire investigation by telephone interviewing the companies? webmasters. The extent of the investigation was 20 companies in Blekinge.

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

AbstractThis essay consists of an analytical study of three present-day Swedish films depiction of teenage life. From these films we like to see how youths are described, what attributes they are given, in shape of attire and different symbolic items, such as language and body expressions. The essay emphasizes which values that dominates among the illustrated teenage groups and compares it to the values and expectations that we can derive from an adult society. Here we let the school?s main determining base documents, Lpo 94 and Lpf 94, represent the dominating values of the society.Our hypothesis is that media, and also these films, creates images that affects the societies comprehension of teenagers and also how teens see themselves.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

This study was conducted in the Master program at The Music Pedagogical Center (MPC) at The Royal College of Music in Stockholm. Korta musikresor (Short Music Journeys) is the Swedish term used for a receptive method of music therapy adapted from the tradition of The Bonny Method of Guided Imagery and Music (BMGIM) and the theory and practice of Expressive Arts Therapy. The KMR method uses carefully selected short pieces of music, lasting between 2 and 5 minutes, to work on various psychological problems and life- crises. The music session is conducted in a slightly altered state of consciousness with a clear focus being established beforehand in a verbal dialogue with the psychotherapist. There is also the possibility of using artwork to process and explore the imagery after the music listening.

A group of two people, Jelena Durkan and Johan von Heideken, have worked together on an assignment from the company August Lundh AB. The company manufactures plastic products for all sizes of catering establishments. The basis for this thesis is a pre-study which shows that many of the users would be more drawn to the plates that the company manufactures, if there was a motif on the plates.This thesis will present the method of application for the motif that best benefits the company, with regard to the requirements placed on the motif, application method and the costs. The group found five relevant methods that were more carefully examined and compared to each other. Those are:Laser engraving, Hot-stamping, Injection molding, In-mould labeling and Pad-printing.The tools that have been used to solve this problem are: Requirement specification, QFD and OEE.