Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

This degree project has been carried out on the commission of AB Borlänge Energi. The purpose of thisproject was to redesign the magazine Energitrycket. The magazine should inform about the current eventsat the company. The work consisted of redesign of the existing magazine and adjustment to copying andpublishing on the web.This project also contains a research about how paper and colour affect the print results. It shows thatthe maximum contrast and sharp image reproduction is best achieved on woodfree, coated, calenderedpaper with high whiteness.

This thesis work is executed at Business Unit Ericsson Test Environment (BETE), in Linköping. BETE is the department at Ericsson, which is responsible for the operation and maintenance of the company's Operations Support System (OSS). Their management system was outdated and they wanted it to be updated and it also required new features. The database needed to be replaced and the data migrated to a new database without licensing costs. The system also needed a part where employees could manage existing users.As a programming language PHP was chosen for its dynamic possibilities, platform independence and good support for database intergration.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

In many clinical applications, it is desirable to transmit sensor information wireless. In earlier research, investigation transmit ECG signal using Bluetooth, was performed. However, when Bluetooth has some drawbacks it is of interest to investigate alternative methods, one such method is ZigBee. Bluetooth has higher data rate speed (1Mbps) than ZigBee (250kbps). However, Bluetooth consumes more power.

The purpose of this study is to present populism as a political phenomenon and to impose focus on the rightwing populist parties that are active in Scandinavia. This essay begins with a presentation of the three rightwing political parties in Scandinavia. The rightwing populist parties have successfully developed their rhetoric and effectively influenced the political establishment in Sweden, Norway and Denmark. The parties that the essay focuses on are theSwedish democrats (SD), the Norwegian Progress party (FRP) and the Danish People`s party (DF). These parties are interesting in the sense that they share many opinions and are active in comparable political atmospheres, but also that they use approximately the same rightwing populist rhetoric as a way of exerting leverage on political policy.The theoretical segment is constructed on a descriptive historical background of populisms three different phases.

Purpose of this study is to investigate whether BBIC had an effect on the interaction between social services and schools. To find this out, a comparative study carried out between two municipalities in southern Sweden who has worked with the BBIC system different lengths of time. The empirical data is based on six qualitative interviews with heads of unit in social services, principals in secondary schools, and social workers who work with children- and youth investigations. The theoretical framework consists of Bronfenbrenners Ecology model, systems theory as organizational theory and the theory of autopoiesis, and Danermark model of collaboration. The results of the survey show that respondents do not find that their inter-organizational collaboration has been significantly affected by the implementation of BBIC, but that BBIC provides a good basis for collaboration due to the logic and structure of the system..

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

The aim of this Master?s thesis is to examine the function of the budget as a means of control within an organisation in the public sector. To accomplish this, a case study has been conducted on a certain business unit within Luftfartsverket responsible for providing Air Traffic Control services. The thesis is built on a framework of contemporary theories of budgeting and includes a brief discussion of the weaknesses usually associated with the traditional budget. The conclusion of the study is that the use of budget as a means of financial control within Luftfartsverket is not efficient enough at the moment.

Vad innebär det för företag att vara socialt ansvarstagande? Det är en fråga som studenter, akademiker och utövare länge har försökt att besvara. Definitionerna är många och skiljer sig åt, och trots att vissa empiriska studier har gjorts inom det här området är CSR ett ämne som i större utsträckning har debatterats än undersökts. Således kan en djupare förståelse skapas genom att empiriskt undersöka ämnet utifrån företagens behov och motiv. I denna studie har avsikten därför varit att behandla just företagens inställning till och användande av CSR.

The Individual Program (within the continuation school) in Sweden is the third largest. Its purpose is that the students, who for some reason haven?t been able to be admitted to a National Program, shall get the chance to improve their possibilities to attend one. The difficulties the students, who are admitted to the Individual Program are carriers of, have a wide range. The purpose of the Individual Program is that no one should be excluded from any continuation school.

Approximately 60 million cubic meters of round wood are transported every year with trucks in Sweden and stand for 15 % of all truck transportation in the country. The big amount that is transported results in many haulage companies works in different parts of the country with different conditions to get a good flow on their transports. Today the transport pricing is very general and the payment consists of the unit round wood they are transporting and the distance of the transport. The purpose of this study were, from the freighter and the haulage company?s perspective, try to find ways to change the today applied transport pricing to more differentiated and compare them to historic payment of transportation.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.