Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

The aim of this study was to get knowledge of the communicationprocess between the branch head and the co-worker in communal geriatric care. To narrow it down we focused on how the branch head experience the communicationprocess in conflictsituations between co-workers and what she or he usually do to resolve the conflict. We made qualitative interviews with ten of the branch heads in communal geriatric care, in four communes. The questions we had in mind throughout the study was based on four keywords (communication, leadership, conflict and conflict management) of which we created a narrative story from every interviewing person to get hold of the experience and knowledge behind their interviews. In our analysis as theoretical perspectives we used system theory, communication theory, attribution theory and the philosophy of Dialogue by Martin Buber.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Problems: How is the purpose of the swedish limited liability company to increase the wealth of its shareholders given in swedish corporate law? Based on which legal and economical grounds has this regulation been made? Which problems may occur when the purpose of the company is to maximize the wealth of its shareholders? Which strategies can be used to prevent the problems that may occur? Should the purpose of the company be to maximize the wealth of its shareholders? Purpose: The purpose of this thesis is to evaluate whether a limited liability company primarily shall aim at maximizing the wealth of its shareholders or not. Delimitations: This thesis only attend swedish limited liability companies. It also only treat swedish corporate law de lege lata. The thesis focus on larger commercial companies which shares are widely spread.

Background: Stroke is one of the leading causes for longlasting sequelae, among themloss in cognitive function, like aphasia. Aphasia effects the patients ability to understandand express themselves in speaking and writing. To be able to reach a good level of care,the careproviders and patients ought to have the same goals and values. This requires agood communication between the careproviders and patients. Which can be problematicfor the caregivers when they don't feel secure in their way of getting close to these patients.Aim: The purpose of this study was to illuminate caregivers experience of caring forpatients with the diagnosis aphasia following stroke.Method: This is a literature study where nine studies, with qualitative design, has beenanalyzed and compiled.

The aim of this two years master thesis is to explore the relationship between public libraries and deaf adults. I want to know if deaf adults are a prioritized group in Swedish public libraries. Deaf adults use Swedish sign language witch is a visual language and differs from Swedish. I discuss the difference in Swedish Sign Language and Swedish and the importance of Sign Language literature. I also explore what methods can be used for mak-ing the library service towards the deaf group more customer centered and service oriented.The lack of sign language knowledge among the library personnel can lead to communication barriers.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Titel: En utvärdering av de anställdas arbetsmotivation vid LantmäterietTitle: An evaluation of the work motivation of the employees at LantmäterietLevel: Final assignment for Batchelor Degree in Business AdministrationDepartment of Business AdministrationUniversity of GävleBOX 6052 GävleSwedenAuthor: Söderberg AnnaDate: 2006-06-08Supervisor: Gaddefors JohanEngvall ErikaPurpose: The main purpose of this study is to create a picture of the leadership,communication and organisation cultures effect on the motivation.Nyckelord: Motivation, ledarskap, kommunikation, organisationskultur, LantmäterietKeywords: Motivation, leadership, communication, organisation culture, Lantmäteriet.

Grus i maskineriet ? en fallstudie om förbättringspotentialVäxeln AB, a company that provide sales, service and repair of industry gears, has contacted the authors of the essay and asked us to investigate in which areas of the company that has improvement potential. Persistent improvement is a recurring and up-to-date issue that many business leaders not put enough resources on. A big problem in many companies is the issue that there is no comprehensive view and therefore some of the workers tend to not follow the routines that are required for the whole system to work.The goal with the essay is to give Växeln AB advice on to which areas in the company that have improvement potential.We have used a qualitative method with mainly semi-structured interviews which has led to an inductive approach. 13 co-workers that work in different areas of Växeln AB have taken part in the interviews.

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

In several cases, systems that have been developed have been very time consuming and cost a lot of money, but they still do not fulfil the users requirements and requests. To make new systems better, you have to find a way to communicate that allows the developers to understand the needs of the user. The aim for our thesis is to highlight the importance of communication in system development. To investigate this we have choosen to do a study of the real-estate system. The work methods that have been used include mock-ups and informal conversations with the user, who is employed by the Church of Sweden in Ronneby.

In total 249 horses surgically treated for colic in Sweden during 2002 until 2005 were studied. The horses was identified by the animal insurance company Agria. Survival was studied with respect to age, gender, breed, diagnosis (small intestinal problems, caecal problems, large intestinal problems, incarceration in nephrosplenic ligament, unspecific colic and other colic problems) and treating hospital. Different survivals were calculated. For short-term survival proportions was used and for long-term it was done using Kaplan-Meier technique and log-rank testing.