This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

It takes a very long time for ionizing radiation of used nuclear fuel toreturn to a natural background level, for this reason one of the requirements for theselection of the location of a repository was that the environment as well people'shealth would be protected from the harmful effect of radioactivity. This requirementmeans that the waste must be isolated in a geological formation. In Sweden therepository will be built in the crystalline bedrock. The location for the Swedish nuclearfuel repository at nearly 500 meters depth at Forsmark in Östhammar was decided 3June 2009. The repository will be located at Söderviken, close to the Forsmarknuclear power plant in a 1.90 billion year old bedrock that will accommodate 12,000tons of spent nuclear fuel.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The acid deposition of sulphur- and nitrogenoxides from combustion of coal and oil cause acidification that lowers pH and gives increased contents of metals and altered aquatic biodiversity in the stream. The liming of lakes and streams, which was introduced to resist the acidification, demand large economic resourses despite of the decreased deposition of the acidifyng substances. Some of the streams are influenced by the acid deposition, while others are naturally acidic. It is therefore importaint to separate the anthropogenically acidified waters from the naturally acidic, in order to optimize the use of governmental fundings for liming. This thesis aims to estimate the acidity status and impact of acidification on 24 catchments upstream liming dispensers, which is part of the liming activities at the County of Dalarna.The acidity status of the streams was classified according to the Swedish Environmental Protection Agency old classification system (Naturvårdsverket 1999) as very acid to acid, with small ability to withstand a pH-change (alkalinity) due to acid deposition.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

It takes a very long time for ionizing radiation of used nuclear fuel toreturn to a natural background level, for this reason one of the requirements for theselection of the location of a repository was that the environment as well people'shealth would be protected from the harmful effect of radioactivity. This requirementmeans that the waste must be isolated in a geological formation. In Sweden therepository will be built in the crystalline bedrock. The location for the Swedish nuclearfuel repository at nearly 500 meters depth at Forsmark in Östhammar was decided 3June 2009. The repository will be located at Söderviken, close to the Forsmarknuclear power plant in a 1.90 billion year old bedrock that will accommodate 12,000tons of spent nuclear fuel.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.

Using biofuels from regeneration cuttings is becoming more common in Sweden. Ash from the combustion of biofuels contains many valuable nutrients and base cations. The Swedish Forest Agency recommends that ash should be recycled to clearings where biofuels have been removed, to avoid future impoverishment of Swedish woodlands. In Jämtland, in northern Sweden, a large quantity of biofuels are taken out from cuttings but ash recycling has not yet been tried. The aim of this thesis was to examine the conditions for ash recycling in Jämtland regarding to soil chemistry and heavy metal content in soil and biofuels.

The purpose of this work is to study a circulation project in Enköping municipality, where the society?s rest products are used to make beneficial products. In Enköping the rest products from waste treatment plants and private sewers are used to fertilize and irrigate Salix plantations that later are harvested and burned at the local combined heating and power plant, ENA Energy AB, to produce electricity and heat. Possibilities to apply this kind of project ona municipality in Russia are also explored.Guryevsk municipality in Kaliningrad region was chosen since there is a need to improve energy systems and reduce emissions to water and air. This municipality strives to become environmentally friendly.

In Sweden, a big part of the energy use is used in the housing sector. Political goals and targets are set up which the housing sector needs to work towards. Apartment buildings are a major part of the housing sector in Sweden and therefore reduction of energy use in these kinds of buildings are key to lower the energy use in Sweden. But there are not only political incentives to reduce the energy use. Some energy?saving measures are directly profitable and should thus be performed.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Odling av mikroalger för framställning av biogas är ett relativt outforskat område. Den forskning som hittills utförts har påvisat lovande resultat tack vare möjligheten att utnyttja resurser som idag går till spillo, eller till och med utgör miljöproblem; mikroalgerna kan rena både näringsrikt vatten (exv. avloppsvatten) och koldioxidutsläpp (rökgaser från industrin) då de tar upp föreningar innehållande kväve, fosfor och kol från dessa källor. Den producerade biogasen kan ersätta fossila bränslen. Dessutom skapas en rötrest som kan återföras till odlingsmarker vilket sluter näringskretsloppet.

This paper concerns a comparative analysis between two pre-Roman burial ground and the cremated individuals buried there, Skogome cemetery in Bohuslän and Smörkullen cemetery in Östergötland. The comparative analysis consists of several parts that concern both cemeteries inner and outer burial customs, and the osteological analysis of a total of 18 cremated invidvidulas. By studying the different parts separately, it has been possible to identify similarities and differences between the two contemporary cemeteries. There are great similarities between the cemeteries, differences were mainly observed in the osteological material relating to the amount of bone in each burial. The smaller amounts of bone in the graves of Skogome also holds a higher degree of fragmentation, but can not be explained by a higher combustion rate than the skeletal material from Smörkullen.