Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Currently, the whole globe is faced with serious problems which negatively affect people around the world: increased pollution, excessive waste, and weather pattern changes. ?Left? and ?right? wing political parties alike have embraced ?green? politics and for many of these parties, environmental issues have become a top priority that is very much reflected in their manifestos. This study examines the environmental goals of two of Sweden?s largest political parties and how these ambitions are reflected at a local level.

Biogas mainly consists of methane and carbon dioxide, where methane is theenergy-rich gas, and is naturally created when organic matter breaks down in absenceof oxygen, also known as anaerobic digestion. A biogas plant re-creates the anaerobicconditions inside a digester where the organic substrate is fed into and digests toproduce biogas. The gas is then used to produce energy by combustion and can beseen as a completely renewable fuel.Today, energy from biogas is used primarily by major stakeholders such asmunicipalities and thus the plants become very large with high investment- andconstruction costs. There are currently few small plants in Sweden, even though thepotential for agriculture and medium-sized to smaller farms to become self-sufficientin terms of electricity and heat is great. Farms have a natural stock of digestibleorganic material in form of manure or crops for example, which are constantlyavailable.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

I en värld där människan är det enda djur som lämnar efter sig avfall som inte kan brytas ned naturligt, är det viktigt att avfallet vi producerar tas om hand på bästa möjliga sätt. EU har därför tagit fram en prioriteringsordning för hur avfallet ska behandlas. Denna kallas avfallshierarkin och ska ligga till grund för medlemsländernas lagstiftning om avfallshantering. I Sverige kallas byggsektorn för den ?40-procentiga sektorn? vilket syftar på att 40 procent av Sveriges avfall genereras av denna sektor.

Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

The work covered in this report includes a literature study of the diesel dual fuel technology(hereinafter referred to as DDF). The literature study covers earlier work that has been doneregarding the use of compressed natural gas (CNG) and diesel in a DDF system. Moreover a onecylinder research diesel engine was fitted with a CNG fuel system for experimental testing. Theinstallation of the engine and the test cell is described. Results from the tests are presentedcovering emissions, heat release and pressure traces from the DDF-concept.During the literature study it was found that most research was related to heavy duty dieselengines.

Avfallsplanen i Danderyds kommun innefattar ett delmål år 2012 att materialåtervinning ska öka med 40 % från 2009 års nivå. I materialåtervinning inkluderas biologisk behandling av matavfall. En möjlig åtgärd för att uppfylla detta mål är att införa insamling av matavfall för rötning. För att ett införande av matavfallsinsamling ska bli så framgångsrikt som möjligt är det viktigt att studera kommuninvånarnas inställning till detta. En litteraturstudie genomfördes för att undersöka om rötning är en lämplig behandlingsmetod för matavfall för Danderyds kommun.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

This report investigates the possibility to use non-petroleum based adhesive (biobitumen) in asphalt. The main reasons for replacing bitumen are the fact that oil prices are rising, the threat of peak oil and the fact that the asphalt industry is becoming more environmentally friendly.The main purpose of this report is to investigate whether there are any non-petroleum based adhesives on the market. If so, how can they be used? The questions covered are:? Are there any other alternative asphalt coatings available?? Can bio-oils be used in asphalt?? If the bio-oils can be used, what are the details their properties?? How does a cold climate affect the bio binders?? What is the Swedish asphalt industry?s opinion about bio asphalt?The project was concluded through literature studies, consultations with people in the asphalt industry and through several interviews.The conclusion of this report is that there are some existing non-petroleum based adhesives on the market. They are mainly used for bike paths, sidewalks and parkareas.

This report was written as a final thesis within the Department of forest economics at the Swedish University of Agricultural Sciences as a completion of the M.SC Forestry programme. The aim of this study was to create a model that, with respect to given stock levels, temperature, fuel usage and fuel price, would identify the optimal levels for purchase of bio fuels, optimal levels of incineration of bio fuels and the sum of the present values of all costs. The model would be applicable for a larger district heating plant. Data regarding temperature were received from SMHI. Information considering fuel prices was taken from the Swedish Forest Agency and the facts about fuel usage were collected from a large district heating plant, located in the southwest of Sweden. For the temperature, a sinus curve was adapted to describe the temperature over a year.

This is a comparative study of the use of intranet in three organizations. The organizations are one help organization, one hospital and one business company. The intranet is a relatively new medium and it might still not have been accepted by all potential users, which is a waste of resources both for the individual employee and for the overall organization. It is therefore necessary to investigate if there are any differences between organizations concerning the needs of intranets. Our purpose with this study was to deepen the understanding of the use of intranets as a channel of organizational communication and thereby acknowledge the users´ needs and opinions of the intranet.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

The aim of this master thesis is to find out how indexing of fiction works. I look at the consistency when users? choices of index words are compared with each other and I also compare users? choices to the current indexing made by libraries. I examine the subject heading list, Att indexera skönlitteratur, to find out how well it works in this particular context. The investigation included seven users who, in three steps, are creating a subject heading index of the Swedish novel Klippdockan by Cecilia Dahlheim.