The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

Syfte ? Studiens syfte är att öka kunskapen om hur fordonstillverkares affärsmodeller påverkas vid förändring av statliga regelverk genom att studera ett framtida införande av HCT i Sverige. HCT, High Capacity Transports, är ett samlingsnamn för lastbilar som är tyngre och/eller längre än vad gällande lagstiftning tillåter. Regelförändringen övervägs för att sänka kostnader och miljöpåverkan. Metod ? Arbetet har genomförts i form av en case-studie.

The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel fuel represents one of the fuels that contributes to these emissions and the use of diesel fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel biofuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for biofuels and by the price level of petroleum diesel.

Saab Training Systems är ett företag i Saab-koncernen som utvecklar, tillverkar och marknadsför produkter för militär utbildning. Ett av de centrala systemen i företagets produktportfölj är det instrumenterade stridsträningskonceptet GAMER, i vilket soldater kan öva dubbelsidig träning samtidigt som övningsledningen via ett centralt styrsystem kan övervaka och interagera i övningsförloppet.I och med den övergång som skett i många av världens försvarsmakter, från ett tungt territorialförsvar till ett välutbildat insatsförsvar har kraven på den enskilda soldatens förmågor höjts avsevärt. Samtidigt har det även skett en övergång gällande den generella hotbilden, från att tidigare ha utgjorts av en annan militärmakt, till paramilitära grupperingar som ofta bedriver en gerillaliknande krigsföring. Dessa två faktorer innebär att även förutsättningarna för soldatutbildningen har förändrats.Som ett led i anpassningen till dessa förändringar utreds i denna rapport möjligheterna att utveckla soldaternas audiella upplevelse i GAMER. Detta för att skapa ökade förutsättningar för en komplett upplevelsebaserad inlärning, som inte bara övar soldatens förmåga att använda sig av den taktiska information som ljudbilden förmedlar, utan även förbereder soldaterna på bästa sätt för den främmande miljö som dagens militära insatser ofta innebär.Inledningsvis genomförs en ljudcentrerad användningsfallsanalys av en uppsättning grundläggande övningsscenarion.

Atopic dermatitis (AD) is a complex, often lifelong allergic disease affecting around 10 % of both dogs and humans. The hallmark symptom is severe pruritus, causing a lowered quality of life. Mast cells (MCs) are known to play an important part of the immunopathogenesis, promoting a faulty T helper cell type 2 (Th-2) response which follows by a production of specific immunoglobulin E (IgE) antibodies towards environmental allergens (Ag). To further investigate the role of MCs and its mediators in the progression of AD, a low-calcemic vitamin D3 analog (MC903) was used to induce AD-like symptoms locally on the ears of two different knock-out (KO) mouse strains. The first strain was Wsh-/- mice deficient in MCs.

Automated Guided Vehicles, AGV:er, används i huvudsak som monteringsplattform inom tung fordonsindustri. En AGV kan användas vid montering av motorer, växellådor och chas-sin. AGV:n transporterar produkten genom en slinga i fabriken, där produkten monteras. Idag säljs AGV:n med ett löfte om femfaldig säkerhet mot brott för alla de ingående komponenter-na. AGV:n är konstruerad för att bära upp en last på maximalt 1800 kg, med säkerhetsfaktorn inkluderad.

Since the late 50th century, the automobile has been normative in the Swedish society (Lundin 2008). This has led to an urban environment deeply characterized by the motor vehicle and its necessities, while other means of transportation, such as train and bicycle, have been ignored and put aside. However, over the past decades, a new trend has been seen in urban planning as a consequence of the increasing knowledge of the negative qualities caused by the car. As a result, the bicycle is seen as a conceivable transport mode.This thesis examines cycling on four issues:- Why is there a need of more cyclists? - How can the total number of cyclists as well as the number of satisfied cyclists increase? - Which factors affect the choice of transport mode? - Which factors affect the choice of route?The first two questions are discussed from a literature study that was conducted at the beginning of the thesis.

Since the late 50th century, the automobile has been normative in the Swedish society (Lundin 2008). This has led to an urban environment deeply characterized by the motor vehicle and its necessities, while other means of transportation, such as train and bicycle, have been ignored and put aside. However, over the past decades, a new trend has been seen in urban planning as a consequence of the increasing knowledge of the negative qualities caused by the car. As a result, the bicycle is seen as a conceivable transport mode.This thesis examines cycling on four issues:- Why is there a need of more cyclists? - How can the total number of cyclists as well as the number of satisfied cyclists increase? - Which factors affect the choice of transport mode? - Which factors affect the choice of route?The first two questions are discussed from a literature study that was conducted at the beginning of the thesis.

Denna rapport beskriver det examensarbete som utförts på Calix AB under vårterminen 2013. Calix AB tillverkar värmare för bland annat batteri och kupé till fordonsindustrin. Uppdraget i detta examensarbete var att göra en omkonstruktion på BEV-heatern (Battery Electrical Vehicle) som är en batteri- och kupévärmare till el och hybridfordon. Problemet med den nuvarande konstruktionen är att den bygger på delar från äldre värmare till fordon med förbränningsmotorer, samt att konstruktionen inte är lämplig för produktion i större serier. Krav som Calix AB hade var:Integrerat ChassiMinimera tryckfallUnderlätta montering och tillverkningUppfylla standarder satta av fordonsindustrinKunna monteras ?in-line? i fordonetFör att kunna genomföra projektet var vi till en början tvungna att få kunskap om hur den befintliga BEV-heatern fungerar.

Detta examensarbete utfördes vid Uppsala universitet i samarbete med Scania CV AB. Scania Commercial Vehicle Aktiebolag, Scania CV AB, är en tillverkare av tunga lastbilar, bussar samt industri- och marinmotorer. På Scania transmission i Södertälje finns ett av företagets största och dyraste verktyg. I dragbrotschningsprocesser används dragbrotschverktyg som per styck kostar allt från 50 000kr och upp till strax över 1 miljon kronor beroende på storlek och utformning.Uppdragets syfte är att kartlägga faktorer som styr ett dragbrotschverktygs livslängd och undersöka alternativ som bidrar till att sänka dragbrotschningsprocessens kostnad per producerad artikel. Mål är att göra en beskrivning av nuvarande system och processer samt kartlägga vilka faktorer som styr dragbrotschverktygens livslängd.

Fascination Travsport. Jag vill attrahera fler människor till travsporten, öppna deras ögon och nå deras känslor för hästens natur. Medelpunkten är relationen mellan människa och djur. En enhet och ett mått: segern. Att ge sitt bästa för att vinna! Styrka, vilja och uthållighet i en spännande och dramatisk sport.

As a member of the EU, Sweden has, in some cases, transferred the controlling rights to the Union. This means that the rules defined by the EU must be followed in all member countries, including Sweden. The European Agricultural policy constitutes the largest part of the EU's annual budget and is in contrast to many other areas fully funded at EU level. The last decade, many new regulations on chemicals and pesticides have been introduced which brought great changes and a lot of work throughout the Union, including Sweden. Sweden has always had a strict policy on chemicals and has been at the forefront when it comes to sustainable agriculture and environmental management.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.