The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The aim of this thesis is to form a theory of the green consumer power and to distinguish whether this phenomenon could indicate a movement toward the ecological citizenship. To do so, scientific theories regarding the responsibility of companies have been used, as well as the public choice theory, to link individuals as citizens to individuals as consumers. The motives of corporate environmental responsibility, along with consumers ability to bring pressure in different dimensions, are later drawn on as indicators applied to empirical information. The largest producer of ecological products in Sweden, Arla Foods, is employed as case study to explore if the green consumer power can and does exist. The ecological citizenship uses the ecological footprint, to define in what ways we can minimize our part of environmental degradation.The study seems to strengthen the theory, consumers do have a power to make companies go green and they tend to use it increasingly.

 AbstractHygiene plays an important role in health care to prevent contamination. Their lack of application of the basal hygienrutinera is a major cause for the spread of microorganisms occurs. The purpose of this study is to examine how rules of basic hygiene and clothing followed in the emergency department a quantentative approach involving the observation was to collect data on this activity. The data collection went on for 1 week at the emergency room, where hospital staff including doctors, nurses and assistant nurses was observed. The study showed that staff at the emergency department did not fully comply to the rules for basic hygiene routines.

The purpose of this study is to examine the difference between three query strategies with respect to retrieval effectiveness. The thesis aims at examining how two types of noun phrases containing a modifier to the head word, which is a noun affect the retrieval performance with regard to recall and precision. The noun phrases in the thesis are of two types: 1) noun phrases containing a modifier to the head word (which is a noun) and which are not dictionary phrases (NF) and 2) dictionary phrases. Both types of noun phrases in this thesis contain at least two words. The queries were executed in Query Performance Analyser, QPA, containing the InQuery system and a sub collection of TREC-Uta documents with its topics.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this Masters thesis is to examine the performance of queries that are expanded by synonyms and hyponyms from Svenskt OrdNät, the Swedish version of the Princeton WordNet. Four different types of queries were constructed: a baseline query S1, the baseline query expanded with synonyms S2, the baseline query expanded with hyponyms S3 and finally the baseline query expanded with the synonyms and hyponyms used in S2 and S3. The terms for expansion were picked by hand. The queries were executed in the Query Performance Analyser QPA, a tool used in IR education and in experimental IR research for analysing and comparing the performance of individual queries. 20 topics from the test collection GP_HDINF were chosen for the experiment.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Regulation of web bots is an analysis of the interest and a collection of discussions about the phenomena web bots. The section that contains the result from the interviews brings up the question about ethical and legal actions and the opposite to those. How the regulation could work is also discussed in the section with the results from the interviews. The discussions were produced by people whose background in one case or another can relate to the phenomena web bots. In that way this study was limited to few, but more profound interviews which would enable analyses of web bots existence.

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

In this report we examine the NFC (Near Field Communication) technology as far as the development has come until today. We adress different use areas and explain the technical funcionality. By using data collection methods as a specialist interview and also a survery we want to detect potential risks and safety-issues in implementation of the new technology. Our main-focus in this report is to examine how NFC can play an important role in the developement of social interaction and social media. By compiling our data and research materials we will analyze and present a report conslusion.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

The purpose of this thesis is to explore the co-creation process and how value is created based on a service orientation using a network perspective. The thesis is studied from a social-constructionist philosophy, using a qualitative approach of data collection and the theoretical framework includes network theories, theories of service-orientation and co-creation. We have conducted semi-structured interviews with a small firm and its network, which consists of a customer, a supplier and a partner. We found that Håkansson?s ARA framework combined with Ballantyne and Varey?s triangulation of value-creating activities help to acquire an understanding of the actors? bonds, the resources? ties and the activity links that exist in a network.