To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This master thesis has been carried out at Scania R&D at the department of Powertrain Control System Development during the winter 2011/2012. The purpose of the thesis was to produce a method that with the result of troubles codes from the field testing would be able to say something about the maturation of a component, in this case the VGT, variable geometry turbocharger. To start with, it was necessary to investigate hich information was available. After the information been summed up in tables and charts, this so that it was possible to understand the huge amount of data, the calculations started.Since the thesis was about maturation of a component the proportions were calculated of components that had a trouble code in contrast of those who passed the test without a trouble code. This Thesis includes background information about basic of statistics and about the company Scania and its testing process.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The aim of this project is to examine the needs and problems that exists amongst homeless people and to develop a solution that will help them in their everyday life. Since the homeless are a relatively large vulnerable group i Sweden, their everyday lives could be made easier in many ways.A clear definition of the target group is put together to create a good starting point. What state and help orginazations do to help the homelss and the society?s view of the homeless is also relevant and has been documented. Four personal stories have been put together to desicribe cases of clear problems existing in everyday life.Several interesting problems has been defined from the research and acceptance in the communtiy, desire to be seen and heard and a lack of confidence were the main needs.

The purpose of this essay is to examine what kind of pictures the children encounter everyday in their classroom. Furthermore, the idea was to immerse myself in how girls and boys are portrayed in these pictures from a gender perspective. Three question were set, to enable this study: What kind of pictures will second grade pupils encounter in their classroom, in a city school and in a rural school?How many girls and boys are illustrated in these pictures?How are girls and boys portrayed in these pictures?The examination was done by a field study of two classrooms, where all the pictures on the walls were documented using a digital camera. The collected material were examined, using both a quantitative analysis and a qualitative ditto.

AASS (Applied Autonomous Sensor Systems, Centrum för Tillämpade Autonoma Sensorsystem) arbetar med forskning inom autonoma system. Deras stora användningsområden är utveckling av automatiska system till fordonsindustrin samt system till äldrevården.AASS, har ett önskemål om en enklare modell av en CNC fräs för enklare fräsning till bland annat prototyptillverkning. Fokus ska ligga på kostnaden då precisionen inte är av största intresse.Uppdraget innebär att ta fram en konstruktion av en cnc- router med tre axlar med ett arbetsrum på 600x450x150mm. Maskinen ska kunna skära i mjuka material som trä, plaster men även mjukare aluminium.Resultatet är en tre axlig cnc- router som drivs av tre stycken stepmotorer som är kopplade till respektive kulskruv. Cnc routern har ett arbetsrum på cirka 600x450x150mm.

The mobile revolution is here to stay, and today most people have (at least) one cell phone at home. Some even a PDA (Personal Digital Assistant)as a complement for the simpler tasks at the office, e.g sending e-mail, word processing, browsing the Internet etc. Many business have also given the employees the opportunity to do some of the business tasks inbetweeen customer visits with the help from a cell phone or PDA.Despite all this, the so called Internet connected mobile revolution is often mentioned as a big failure. Maybe because the people in general tended not to use the new technology as much as the companies predicted. This could be because they still haven't learned how it works, or just don't seem to have the need for services provided.After a couple of failures in the development process, almost every cell phone has support for mobile Internet today.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

With increased need for flexibility in timber deliveries, forest roads become an important factor. The disintegration of roads during the spring season can be avoided if it is possible to rule cutting areas to stands with good carrying capacity along roads with good carrying capacity. The goal with this work was to create a method to find the stands with high carrying capacity located near roads with high carrying capacity, and select them into a collection file. The method was based on Esri ArcGIS 9 and the tables that follow within that program. The method resulted in four different themes: 1. Collections with GYL 100 that cross the bufferzon for 0, 1, 2 and 3 class roads. Result 36 collections. 2. Collections with GYL 100 and 200 that cross the bufferzon for 0, 1, 2 and 3 class roads.

This is a study about the relation between the Swedish school and the political system of Sweden. I wanted to see if the relation had changed since the election of 2010 as it was in that election the Sweden Democrats got over five percent of the votes and took seat in the Swedish parliament. The thing that is unique about this election is that it was really the first time a right-wing party had been elected into the Swedish parliament. Many experts argue that this is the first xenophobic party that has been elected into the Swedish parliament. This led to a problem for schools and their principals and a difficult question to answer because xenophobia is contrary to the school?s core values and the school?s democratic mission.Should the school still be open for political parties? How do schools manage to distinguish between political information and political propaganda? If parties still are welcome into the schools, which parties should be allowed? The equality ombudsman has said in a report that the schools have to comply with the principle of objectivity, which stipulates that the public sector has to be unbiased.I have chosen to make use of a qualitative method because I think the study then gets a deeper understanding of the topic.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

The aim of this paper is to investigate the implementation of genres, pertaining to non-fiction, in four different universal classification schemes BC2, UDC, DDC, SAB. It is not the aim of this paper to answer the question why certain genres are more implemented than others, or vice versa. Instead it is intended to be an investigation into the concept of non-fiction genres with the aim of attracting attention to the many interesting aspects of this concept for library- and information science research. An analysis of the schemes general auxiliary tables is performed by comparison with a specific genre-system devised by Ottar Grepstad. This genre-system is organised by dividing different genres into groups according to linguistic criteria.