Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Då marina enheter numera deltar i internationella missioner, kommer den nya miljön som enheterna opererar i att påverka bland annat deras sensorer.Den här studien avhandlar några av de nu framtagna självsanerande ytbeläggningarna och ger en presentation av hur de fungerar på några marina elektrooptiska sensorers yttersta linser.Studien försöker ge svar på ytbeläggningarnas transmittans och hur effektivt de kan sanera bort oönskade saltlager tillsammans med andra nedsmutsande partiklar från sensorlinserna samt den militära nyttan av att använda självsanerande ytbeläggning..

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The thesis project is accomplished during winter and spring 2008 at Karlstad University at the faculty of technology and science. The tutor at Karlstad University is Nils Hallbäck and the examiner is Hans Johansson. Rolls-Royce at Kristinehamn in Sweden is the initiator for the project. The thesis project title is design of the blade bolt joint on Kamewa CPP. CPP stands for controllable pitch propeller.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

The aim of this inquiry was to investigate the most appropriate measures to reduce noise impacts from road traffic on the Nydala recreational area in Umeå municipality due to the planned re-routing of the E4 motorway to an existing road along this area. The sound environment is an important part in the experience when we are visiting recreational areas. Noise is not only disturbing; the liberty from unwanted sounds also allows us to perceive natural sounds that are a benefit for the cultural experience. Therefore it is important to take actions to protect this well used area from traffic noise. The reasonable options to avoid noise impact in this case are to lower the speed limit, using a noise reducing coating or use noise protection screens and walls.

Development in spin dynamic occurs in the whole world because of therising demands on fast electronic storage for example hard drivesand RAM (Random Access Memory). Measuring the spin resonance of amaterial gives you the insight of the theoretical speed for amagnetic memory. This means the maximum storage speed is below thefirst resonance. All magnetic materials have different propertiesthat will inflict the resonance frequency which brings that theconstructors of memories need to know which magnetic material theywill use to obtain best results. In the market for normal users themaximum storage speed in a RAM memory is 1.6 GHz.

Ferruform är ett företag med ungefär 600 anställda och ingår i SCANIA koncernen. Tillverkningen i Luleå är inriktad mot lastbilskomponenter som t.ex. tvärbalkar, bakaxelbryggor och andra ramkomponenter. Dessa transporteras sedan vidare till bland annat Zwolle och Södertälje för slutmontering. Detta examensarbete riktar in sig mot Ferruforms 3-press som idag förses med klippta plåtämnen. Arbetet går ut på att undersöka möjligheterna att förse den med en avhasplingsutrustning.

Ferruform är ett företag med ungefär 600 anställda och ingår i SCANIA koncernen. Tillverkningen i Luleå är inriktad mot lastbilskomponenter som t.ex. tvärbalkar, bakaxelbryggor och andra ramkomponenter. Dessa transporteras sedan vidare till bland annat Zwolle och Södertälje för slutmontering. Detta examensarbete riktar in sig mot Ferruforms 3-press som idag förses med klippta plåtämnen.

The aim of the present study was to examine smoking behaviour and motivation for smoking cessation in patients at a dental clinic. Another aim was to examine if the patients had been asked by the dental staff regarding their smoking habits.Twenty-two patients from a student clinic and twenty-one patients from a Swedish Public Dental Service Clinic in southern of Sweden participated in the study. Participants consisted of eighteen women and twenty-five men. Data collection was carried out using a questionnaire that was directed at smokers. The questionnaire was answered in connection with the visit to the dental hygienist.The patients smoked between eight and twelve cigarettes per day and had on average smoked between 5 -15 years.

Detta examensarbete har utförts hos Vattenfall Eldistribution på avdelningen Kontroll och Skydd med målsättningen att utforma och utvärdera en nätmodell avsedd för jordslutningssimuleringar i PSCAD. Ombyggnationen från luftledningar till markkablar har medfört att kapacitansen i distributionsnätet ökat, vilket ställer högre krav på jordfelsutrustning och på nätanalyser för att kunna försäkra att en säkerställd frånkoppling kan ske enligt de myndighetskrav som föreligger. Syftet med arbetet har varit att undersöka hur en nätmodell bör utformas för analys av stationära in-svängningsförlopp och utvärdera hur stor noggrannhet som kan förväntas gentemot verkliga jordfelsprov vid felresistanser på främst 3 k? och 5 k?. Nätmodellen har ut-formats efter ett verkligt impedansjordat mellanspänningsnät med ?-länkar i PSCAD och utifrån de nätuppgifter som förekommer i Vattenfalls näthanteringsprogram Netbas.

This study aimed to evaluate the levels of formaldehyde and organic acids that can build up within enclosed spaces. Another goal was to compare two types of paints that can be used as coating barriers within showcases and in turn compare them to the modern, and by many highly recommended, material of Marveseal®. A low volatile waterborne alkyd/acrylate paint and a two component polyurethane paint was compared to Marveseal® in two series of experiments. One series measured the level of formaldehyde, and thus the effectiveness of the three chosen barriers, and the other series measured the level of volatile organic acids, both the acids emitted from the paint itself, and that of the wood. One box in each series were not treated at all and was used as a reference.The fact that different types of materials emit volatile organic compounds have long been known.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.