The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

Detta examensarbete är det avslutande momentet för programmet ?Byggteknik och Design? på ?Kungliga Tekniska Högskolan? i Haninge. Arbetet utfördes för byggföretaget Einar Mattsson Byggnads AB. Uppgiften var att ta reda på varför kalkylerade och verkliga kostnader för nybyggnadsprojekt skiljer sig. Studien baserades på produktionskalkylerna för fyra projekt och ntervjuer med minst en inblandad från varje projekt.

The numbers of natural disasters caused by extreme weather are increasing through out the world. A large majority of the research concerning the climate shows that this is a trend that can be expected to continue. At the same time the urbanisation is increasing more than ever and for the first time in history more than fifty percent of the population lives in a city. How we build these cities will have a crucial importance for our adaption to the new climate. In Sweden, our capacity for an adaption are high because of our economic situation as well as our rather well built society.

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

Energy-wise houses in Järinge - technical follow-up The company JM built energy-efficient houses in Tensta in Stockholm. They have built a total of 16 houses divided into two parts of A-houses and B-houses. The buildings are an attempt by JM to minimize energy-use of the buildings without affecting the comfort and living standards. The project aims to examine the data for the 16 houses on the basis of data and produce a report showing how the buildings worked through a technical perspective. JM approximates that the purchased energy will not be higher than 95 kWh/m2 per year.

This literature review examines different forages which are well suited for suckle cow production in Sweden today. They should also be possible to cultivate in Sweden under the current circumstances. Crops suitable for grazing in Swedish climate but not used in Sweden today, but which may be relevant for Swedish conditions are also mentioned. In Sweden today, mainly grass silage, straw and hay are used as forage, but also wholecrop silage is used to some extent. However, concentrates are not used to a greater extent, since it contains too much energy.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

Land consolidation is a major problem in many countries in Europe. In Sweden, mainly the state of Dalarna, there is a strong consolidation of forestland, probably the strongest in all of Europe. The consolidation is a big obstacle for forest management and ownership questions due to the often long and narrow strips of land. One of the main reasons for land consolidation in Dalarna results from the heritage procedure, were land is divided between all of the inheritors. To improve the consolidation large surveys in the consolidated villages in Dalarna are carried out. Many laws have to be followed due to the survey.

Climate change is one of the most difficult problems that humans have to deal with. Today, the evidence of human effects on the climate change and the rise of temperature on earth are strong. It is extremely important that all countries get together and cooperate in order to be able to solve the problem with climate change. One step in the work on climate changes is the Convention on Climate Change, which was agreed on in 1992. The Convention on Climate Change resulted in the Kyoto Protocol in 1997. The Kyoto Protocol is an agreement between a number of industrialized countries to limit or reduce the green gas emissions.

The purpose of the thesis was to map the hydraulic load on the Knivsta river from stormwater runoff, and build a platform for further studies of pollution loads on the rivers ecosystems. New residential areas are planned to be built in Knivsta municipality and it will have an impact on stormwater flows to Knivsta river. To examine the impact this will have, simulations were made in the area as it stands today and after expansion work. The work includes calculation of flows from the populated areas but also from the catchment area around it consisting of woodlands and fields. Because of expected climatic changes which may affect rainfall, the simulations have been performed with different return periods for rainfall data.