The aim of this research is to develop a better understanding of how preschool-teachers respond to children in preschool, when they show that they want to have some influence. I have concentrated this study on how the preschool-teachers respond to the children in the gatherings and when the children are playing freely indoors, where the questions at issue are:How do the preschool-teachers respond to the children?s initiative for participation in the gathering and while playing freely?There have been four preschool-teachers and 14 children who have taken part in this study. The children who took part are in the ages of three to five. The study was done at a section in a preschool in middle Sweden.The method used in this study is unstructured observations.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

Drinking water is produced from raw water and is either from groundwater or surface water. This thesis aims to find out if the cleaning process of raw water is sufficiently effective. This is important because consumers are otherwise at risk of waterborne infection caused by pathogens. There are three groups of pathogens; bacteria, virus and parasite. These have different characteristics which mean that they require different water treatment to be separated.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

This essay is an analysis of the objects made of bronze found in an excavation Västergarn parish, Gotland, in 2010, conducted by the University of Gotland. The studied material presented in this essay comes from contexts inside, as well as nearby the foundation of a medieval building which purpose is still not certain. The first purpose of this study is to present the bronze-objects found inside and nearby the foundation of house 6, and to see if there are any datable objects. There is also a discussion whether there has been any bronze-crafting in the area. The second purpose is to make a contextual analysis to see if there are any differences between the material found outside and inside of the building, and what conclusions can be made regarding the function and use of the building.

This bachelor thesis discusses firefighting and the use of portable fireextinguishers in the salvageof historic artefacts focusing on textiles. It also looks into the use of multi-purpose dry chemicalextinguishers in a textile context and the impact the actual dry-agent has on textiles afterfirefighting.Literature studies, interviews and tests on different textiles were carried out to write this thesis.During the tests textiles were exposed to the dry agent and also to dry agent plus water toinvestigate the difference in residue. After vacuumcleaning it was clear that when the textile wasexposed to dry agent and water it was almost impossible to remove the chemical without rinsingin water.By examining the residue left on the textile using SEM it was possible to see if a textile was aswell decontaminated after vacuum-cleaning as it looks to the eye. We know that the dry agentoften consists of ammonium phosphate which acts corrosively on many materials and one canassume it damages textiles as well after longer exposure.Buildings housing cultural collections are vulnerable as we cannot easily replace ruined materialwith new.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

Projektet Precious utforskar narrativa lagningar av artefakter. I arbetet diskuteras människans komplexa förhållande till artefakter. Komplexiteten som behandlas i arbetet är fokuserad kring att artefakter förutom rent praktiska funktioner; även fungerar som verktyg i den sociala interaktionen människor emellan. Industrialism i kombination med bland annat den fria marknadsekonomin har särskilt efter Andra Världskriget bringat välfärd och accelererande konsumtionstempo i det moderna västsamhället. Konsumtionsvanorna är numera mer sammanlänkade med varumärken och social status än behovet av praktisk funktion.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

SSAB Tunnplåt AB i Luleå tillverkar höghållfasta stål och ett viktigt processteg är stränggjutningen, där flytande stål gjuts till så kallade slabs: stålstycken som sedan valsas till plåt. Under gjutningen rör sig den första delen av anläggningen i en oscillerande rörelse som är viktig för processen, men denna rörelse genererar också intryck i det nybildade stålskalets yta, varpå stålet riskerar att spricka. Dessa inre och yttre sprickor försämrar slabsens kvalitet. Sprickförekomsten kan påverkas genom att styra oscillationsrörelsen under gjutningen. Sprickfrekvensen skattas genom att mäta det så kallade oscillationsmärkesdjupet.

This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

Chlorinated solvents are common contaminants in soil and water. Under anaerobic conditions microbes are capable of transforming chlorinated solvents into ethylene which would result in a remediation of the contaminated area. In order to use natural attenuation as a remediation method evidence of continuous degradation is required. Furthermore, the degradation must occur at a sufficient rate and continuous monitoring of the site is needed until the demanded levels are achieved. A field study was performed on the basis of data from a dry-cleaning facility contaminated mainly by perchloroethylene.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.

This paper describes the evolutionary development of an information system for a small company. The company performs overhaul of forklifts and cleaning machines. The company has already an information system that handles the reports from these overhauls but it needs a supplementary tool that assist the chief planner to plan forthcoming overhauls.It should be able to display coming overhauls in a timetable and eventually print them, either to a PDF file or to a document. The timetables this function produces will help the chief planner and the assemblers to get a good overview of their day-to-day work.The tool needs to be intelligent in that way that it takes into consideration were in the country different assignments will be performed. So that time consuming travels over great distances can be avoided.