Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

Insecticides will be removed from Swedish forestry, at present insecticides are used to treat our seedlings to avoid them from being attacked by pine weevils. With the forthcoming ban on insecticides alternative protective measures will have to be tested. Holmen Forest Ltd has aimed to find an alternative and have developed a mechanic pine weevils protection accessory as well as a new concept on planting pipes. Studies have been conducted on the behalf of Holmen Forest Ltd to see how planting with the newly developed mechanical protectors and plant pipe stands up against the conventional methods used today. The study was conducted over a three week period. Three factors were compared regarding planting quality including i) pressure around the plant, ii) the depth the plant ended up in, iii) plant angle. Mechanical plant pipes were used in the study, and where tested like a one-handed and a two-handed pipe. The study concludes that further development is needed for the mechanic plant protector to live up to the speed and quality of conventional methods.

It is important for today?s farmers to minimize the costs for crop establishment, because of decreased prices and support from the EU. Farmers, who plow in autumn on heavy clay soil, often do some kind of tillage in autumn to get better soil structure before spring seeding. This is especially important when growing small seed crop, e.g. sugar beet and oil plants.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Bygghantverk, 22,5 hp, 2015..

AbstractStormwater is defined as rain- and melted water. Ludvika kommun had little knowledgde about the stormwater that reaches a specific recipient Lyviken. Therefore they intended to do an research of the stormwater that leads down to Lyviken. The aim with this study was to assess the quality of the contents in the stormwater based on pH, conductivity, phosphorous, nitrogen, bacterias, oil and one sample that meassured the value of several methals. Since the population has increased for decades, the area of hard surfaces and asphalts areas also has increased. This can increase the pollutions that finally ends up in the recipient.

Due to excess precipitation that cause runoff, all soils in Sweden naturally leaches nitrogen.High leaching from arable land is an environmental problem when the runoff reacheswaters. In the international agreement, Baltic Sea Action Plan, the aim is to reduce therunoff of nutrients. Sweden has agreed to reduce its load of e.g. nitrogen to the Baltic Sea.One of the proposed measures is an increased use of site-specific N-fertilization, which hasbeen shown to increase nitrogen use efficiency and therefore also reduce the nitrogen runoff.Either yields are increased with the same total amount of nitrogen, or the total quantityof nitrogen is reduced with preserved yield levels, which is profitable for the farmers.The dynamics of nitrogen leaching differs between top dressing applications above orbelow the economical optimum. There is a consensus about a difference in the dynamics,but not about its magnitude.

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

A study has been performed that investigates the variation of iron content in groundwater.The study was initiated by Midvatten AB, which noticed that the iron content in groundwater samples can vary greatly over small distances. The purpose of this study was to geochemically and geohydrologically determine the factors that influence the content of iron and manganese in groundwater from a selection of eskers in Dalarna, and determine how to best sample groundwater with the method used by Midvatten AB. An evaluation was made of how the vertical variation in soil material, water composition, pumping time and pipe material affects the content of iron in groundwater. Piper diagrams were used to study the relationship between the chemical composition of the groundwater and the content of iron and manganese in groundwater samples from the studied areas. The groundwater from the studied areas was then classified in the Piper diagrams, according to the content of the major ions.