Sökresultat:
345 Uppsatser om Circuit optimization - Sida 6 av 23
Förtätning av Skövde Stadskärna
Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.
Solvärme till Östersunds Rehabcentrums terapibad : Förstudie av förutsättningar för, - och lönsamhet med, solfångare för att värma terapibadet
This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.
Vindkraft ? en alternativ drivkälla för tågtrafiken
Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.
Automatisk Identifiering av Inandningspauser i Spontant Tal - ett HMM/ANN-hybridsystem i Matlab
This thesis presents a system which has been implemented to satisfy a need in theresearch on how speech planning interacts with syntactic and prosodic structure inspontaneous speech. The long-term purpose of the research is to provide models forautomatic parsing of spontaneous speech and for psycholinguistical modelling of speechproduction. Identification of inhalation pauses is an important step in the developmentof automatic methods for spontaneous speech parsing.Identification of inhalation pauses is considered to be a keyword-spotting speechrecognition problem. Hybrid HMM(Hidden Markov Models)/ANN(Artificial NeuralNetworks) approach is applied to this problem. Method gets 90,8% in Recall, 66,4% inPrecision and 76,7% in F-score.
Bestämning av optimal fordonspark -Distribution av bitumen vid Nynäs AB
Nynas produces bitumen at two refineries in Sweden. The bitumen is shipped to seven depots along the swedish coast line, and from the depots special trucks handle the transportation to customers. Recently Nynas has transformed its supply chain and closed down a few depots. At the moment the company is considering a further reduction of the number of depots. In connection to these discussions an analyse of the companys distributionsystem and of possible changes is required.
Bidragsanalys av dimensioner och postningar : en studie vid Vida Alvesta
An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process.
In this study the economic contribution of different dimensions/products are analysed.
Kontinuerlig RFID-detektering för batteridrivna system
This report deals with RFID systems and how to detect nearby tags with the Mifare standard using only a microcontroller and an antenna circuit.The aim was to investigate whether there was any possibility to continuously search for a nearby tag for a system operated with batteries without compromising the lifespan of the battery. At this time the system would take too long time to wake up and look for a tag to give a satisfactory battery lifespan, which should be done a couple of times every second.The report has two issues, namely:Is it possible to direct the microprocessor to detect and identify a nearby tag after the Mifare standard?What hardware is required for this to be possible?As the research method to provide answers to the above questions an action research was used. This approach has meant that the group worked on information retrieval, examined existing solutions, tested their own solutions and documented the results.The group examined an existing solution that can search for nearby tags with minimal energy consumption. An antenna circuit was built that was connected to the processor.
WAN-optimering för sjöfarten : En möjlighet att effektivisera datakommunikationen till sjöss
Verksamheten ombord på fartyg blir mer beroende av datakommunikation och många av arbetsuppgifterna ombord underlättas genom att besättningen kan nå information lagrad på annan plats. Fartygens bredbandsanslutning sker till största delen via satellitkommunikation där långa avstånd och begränsad datahastighet resulterar i att datakommunikationen blir ineffektiv. I denna studie undersöks vilken prestandaförbättring som utrustning för nätverksoptimering kan innebära för långsamma WAN-förbindelser via satellit. Undersökningen visade att det största problemet med anslutningar via satellit är den signalfördröjning som uppkommer vid långa sändningsavstånd. Detta medför att det blir prestandaproblem för datatrafiken och användare upplever anslutningen som långsam.
Känsloigenkänning i form av ansiktsuttryck med Kinect
Facial expressions are a part of our body language that helps us to clarify the verbal communication between humans. We use our facial expressions every day, both consciously and unconsciously, to express emotions and attitudes depending on the situation. The hypothesis of the study is: Given a facial expression, how well can Microsoft Kinect, as an input method, determine a person?s feelings with the two algorithms Naive Bayes and Sequential Minimal Optimization? The feelings are limited to happy, sad, surprised and disgusted. With the help of Kinect, a person?s facial data, both coordinates of the face and parameterized data, were saved and used for machine learning.
Hur ökad fukthalt påverkar pannor
This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.
Utbildningssimulator av funktioner i spa?rfordon : Ha?rdvarusimulator med felso?kning pa? do?rrsystem
This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.
Konstruktion Signalgenerator
SAAB Aerotech division FGR in Arboga builds and develops equipment and components used in both military and civilian applications. To build a test system for a specific project that SAAB is responsible for requires a simple signal generator that can provide a pulse modulated signal. The need to buy a new advanced signal generator for example from Agilent is not as profitable as the instrument is expensive and contains features that SAAB does not require in their applications and test systems. That was the reason why SAAB offers two students a thesis where the goal is to construct a signal generator in accordance with what SAAB requests.This thesis contains several different phases. The first step was a meeting with our supervisor Mats Bergman and by reading the data sheets for components to be used in the project, with these information and specifications that we have received from SAAB we started to construct the signal generator.What we did during the construction work was to simulate and draw a schematic to be able to design the circuit board.
Flockning och förtjockning i High-Rate-förtjockare ? en jämförelse med konventionell förtjockarteknik och lamellsedimentering.
In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.
Styrtransmission för bandfordon
The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.
Optimering av lättvikt ramkonstruktion till räddningstält. : Optimization of a lightweight frame for rescue tents
En nyskapande byggnad, en opera. Trots det perfekta läget mellan berg och mot vattnet så vänder sig byggnaden innåt. Med formen av ett kvarter där innergården är det centrala. Runt den grönskande gården finns de publika rummen och så fort man kommit upp i dessa öppnar sig Stockholms inlopp för besökarna. Byggnaden har ett fokus, besökarna får ett fokus..