Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

Since their invention in 1999, CubeSats have become a widespread standard for small picosatellite missions. CubeSats allow for quick development of satellite payloads and launch in space without the high costs of a normal satellite. Emphasis during the CubeSat design process is placed on use of commercialoff- the-shelf (COTS) components and reuse of previously-designed units.This report describes the interfacing of a scientific magnetometer, the Small Magnetometer in Low-Mass Experiment (SMILE) to such a CubeSat mission, the Space Weather using Ion spectrometers and Magnetometers (SWIM). Design of a complete platform for use in multiple such missions is presented here.Modularity is one of the key aspects followed in the course of the work. A new board containing the analog pick-up and compensation circuitry for SMILE has been designed to fit inside a CubeSat frame.

Thermia Värme AB is one of the market leading manufactures of heat pumps. In order tomaintain this position, the company wants to improve the vibration characteristics of theirproducts. The aim of this thesis is to develop product design changes that lead to a reductionof vibrations in the heat pump Thermia Diplomat 8.The main cause for vibrations in the system is flow pulsation and mechanical forces inducedby the scroll compressor. Vibration is transmitted through the compressor piping and receivedby the heat exchangers, from where it is further transmitted to the connection points for theradiator and heat source circuits.A number of design changes in order to improve the vibration characteristics have beenevaluated through calculations and practical experiments. The changes have included thecompressor and heat exchanger mountings, the compressor suction and discharge line pipingand also pulsation dampening.The results of the experiments show that the vibration levels in the connections for the heatingand brine circuits can be decreased strikingly through changes in suction and discharge linepiping.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

The genus Campylobacter is globally recognised as the leading bacterial cause of human foodborne gastroenteritis. Every year around 8000 Swedes are infected by Campylobacter. Most people are infected by thermotolerant Campylobacter species, commonly C. jejuni and C. coli.

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

Cultivable land is a limited resource and agriculture contributes to some of the most serious environmental problems facing the planet like, global warming, eutrophication and loss of biodiversity. The specialized, industrial agriculture with monoculture and extensive input of external energy, commercial fertilizer, and chemical pesticides are all essentially unsustainable. An adaptation to other methods of production is necessary to preserve the environment for future generations. The aim of this study is to describe the factors that distinguish sustainable from unsustainable agriculture. The results will be used to examine if and how the European Union (EU) works in order to create a more sustainable agricultural industry and to analyze the preconditions for such development.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

I all teori om sökmotorsoptimering finns det många olika tankar om hur man ska sökmotorsoptimera. De flesta berättar mest om den tekniska biten och har endast som en kort punkt förklarat att innehållet på en webbplats också är viktigt. Syftet med uppsatsen är att undersöka webbföretags förhållningssätt till både hur de arbetar och resonerar kring sökmotorsoptimering och webbstatistik, men även gå djupare in på hur förhållandet mellan kund och företag påverkar vart marknaden är på väg. Genom att utföra kvalitativa intervjuer med webbföretag där främst marknaden för sökmotorsoptimering, sponsrade länkar och webbstatistik diskuterats har ett resultat utformats.Baserat på de senaste artiklarna, respondenternas svar och mina egna personliga reflektioner av situationen, visar det att det blivit en förskjutning i vad definitionen av sökmotorsoptimering är. Den tekniska biten är kvar men inte alls lika viktig längre då sökmotorerna hela tiden ändrar sina algoritmer och blir smartare, utan fokus läggs istället mer på innehållet.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

Bakgrund: Sedan introduktionen i början av 1990-talet har utvecklingen av volymen nyemitterade aktieindexobligationerna totalt sett varit positiv vilket tyder på att produkten blivit en populär sparform hos svenskar. Detta tillsammans med det faktum att det finns få studier gjorda kring aktieindexobligationer som sparform där ett större perspektiv tas i beaktande gör ämnet intressant att studera.Syfte: Uppsatsens syfte är att kartlägga och analysera för vilka privata investerare aktieindexobligationer passar som sparform ur ett livscykelperspektiv med utgångspunkt i (i) bransch- och rådgivningspraxis, (ii) finansiell riskhanteringsteori med fokus på portföljvalsteori och (iii) historisk data avseende risk och avkastning.Genomförande: Studien har genomförts med hjälp av att intervjua privatrådgivare, kapitalrådgivare och personer som arbetar med strukturerade produkter på storbanker och hos mindre finansiella aktörer. Fem stereotyper har använts som diskussionsunderlag vid intervjuerna. För att kunna föra en djupare analys kring produkten som sparform för privata investerare har en portföljoptimering genomförts för att ta historisk data gällande risk och avkastning i beaktande.Slutsats: Studien fastställer att produkten passar privata investerare som befinner sig i den senare delen av konsolideringsfasen och inte är de mest riskbenägna. Studien visar att det främst är kredit- och marknadsrisken som är kopplade till aktieindexobligationer samtidigt som risken i produkten bedöms som låg.

As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.