To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This security study attempts to explain the dynamics of international conflict management of an intrastate conflict, through a combination of three theoretical frameworks. The conflict in Syria is shown to be managed mainly through strategies using coercive diplomacy, and some main contributions within the research field relating to strategies of coercion are used for guidance, to important factors which could affect coercive international conflict management, as well as to additional theories which could enhance the study?s explanatory power through a combined theoretical framework. The two added theoretical frameworks are Power Balancing and a Multidimensional concept of Power. With the aid of analytical tools derived from this combined framework the conflict management is analysed within both a multilateral and unilateral setting, offering some explanation as to why international conflict management (practiced by UNSC multilaterally and USA unilaterally) has shown so little progress in regard to the conflict, as well as why one significant, though limited, result could be achieved regarding the destruction of the Syrian regime?s chemical weapons arsenal..

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

The interest for locally produced food is increasing due to consumer concern about the environment, distrust of industrial foods and a demand for high quality products. Apple is the predominant fruit crop in Sweden, and by processing apples into cider and vinegar, these products could significantly contribute to the development of the market of local foods.In this study different yeast types and different bacterial cultures were evaluated for their suitability in cider and vinegar production from cloudy apple juice. Ten apple cultivars (Aroma, Baldwin, Belle de Boskoop, Bramley, Cortland, Gravensteiner, Ingrid-Marie, Jonathan, Rubinola and Spartan) were also evaluated for their suitability for production of juice, cider and vinegar. Chemical analyses including total soluble solids, titratable acidity and total phenols were performed on the products along with sensorial evaluation by taste panels.The yeast strains were shown to have an effect on fermentation rate and the resulting content of total phenols in ciders fermented from cloudy apple juice. Dry commercial starter strains gave a higher appreciated cider compared to cider that was spontaneously fermented, and the ale yeast Safale S-04 was concluded to be the most suited for fermentation of cloudy apple juice.For vinegar production, the bacterial culture had an effect on TSS, but not on any other chemical or taste characteristics.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

Goods that children come in contact with on a daily basis for example toys, electronics, textiles, household items, have attracted an increased attention in recent years because of a common occurrence of residues of potentially hazardous chemical substances. Some municipalities in Stockholm have developed plans for managing chemical risks and work systematically to phase out products containing hazardous substances. This thesis aims to contribute to an improved knowledge base for any future work with non-toxic nursery schools in Haninge. The study's focus is on the challenges encountered by conditions and problems of preschool personnel to manage chemical risks in early childhood environments. Primary data was collected through a qualitative approach based on semi-structured interviews with both the preschool staff and practitioners working in the central organization of the municipality.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

We aim to investigate the risk exposure against commodity prices in the forestry and paper industry. The intension is also to study the affect that the changes in commodity prices has on a company?s market value..

Syftet med studien är att kartlägga innehållet hos vätskorna i de indirekt energiöverförande kylsystemen och att uppskatta deras potentiella miljöpåverkan vid utsläpp. På vätskeprover från system 5 till 8, som är tagna i returledningen på köldbärare 1 i respektive system, har det uppmätts hög syrgashalt, konduktivitet och COD (chemical oxygen demand), vilket ger stor risk för nedbrytning och korrosion. Dessa systemvätskor borde avgasas eller bytas ut. Systemvätskan från system 3, 7 och 8 överskrider gränsvärdena för zink och nickel och de skulle ha toxisk/ - mycket toxisk effekt på vattenlevande djur och växter. Koppar, zink och nickel är nitrifikationshämmande vilket innebär att de påverkar det biologiska reningssteget vid avloppsreningsverket negativt ifall vätskan släpps ut till det kommunala avloppsledningsnätet. Det framgick utifrån den använda värderingsmallen att de sju största miljöaspekterna är relaterade till föroreningsvariablerna: COD (chemical oxygen demand), zink, syrgas, kväve, järn, nickel och pH. Miljöeffekterna uppträder i form av påverkan från metaller och utarmning av naturtyper, biotoper, arter etc.

Risk-based sampling program of microorganisms in the water source in northern SwedenAfter several disease outbreaks caused by parasites in the drinking water during the last years, it is more essential than ever to insure that the water supply companies have enough barriers to counteract the presence of microorganisms in the outgoing water. It is also discussed whether climate changes such as increased precipitation can have a connection to the increased cases of parasites in water sources. The water source at Gäddvik is Luleå municipality?s largest and provides drinking water to 64 500 of Luleå?s 74 000 inhabitants. The investigation of microorganisms in the water source, especially in the Lule River has not been as prioritized as the sampling of chemical parameters.