An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

Total organic carbon (TOC) and chemical oxygen demand (COD) are two methods used for measuring organic pollutants in wastewater. Both methods are widely used but the COD method results in production of hazardous wastes, including mercury.The purpose of this study was to validate the method TOC that will replace COD and find a factor to convert TOC to COD. In this study 26 samples were analyzed from four sewage treatment plant in the municipality of Enköping.The results show that the COD method could be replaced by the TOC method.The factor for COD/TOC was between 3.1 - 3.3. Both methods will be used in parallel until 2013 when it will be forbidden to use the COD analysis..

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

Conqueror for Indigo is production treated with an active chemical to maximize the ink adhesion.ArjoWiggins has found that another chemical, the candidate compound, would improve the propertiesof the paper. ArjoWiggins therefore wish to replace the current compound. To strengthenthe patent requirements for ink adhesion needs to be determined. A theory is developed to whychemicals with certain properties maximize the ink adhesion. Experiments are performed but theresults are inaccurate.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Soil organic carbon (SOC) stocks and fluxes in forest ecosystems are influenced by natural and human disturbances. In the tropical regions the highest impacts on disturbance in forest C cycles are related to human activities such as conversion of natural lands to cropland and pasture areas and to forest plantations. The disturbances in the forest C cycles will release CO2 emissions to the atmosphere triggering global warming. In this study the focus was set in subtropical soils in Brazil, south extreme region of Bahia. The aim of the study was to investigate whether reforestation of Eucalyptus plantations under former pasture areas will help mitigate climate change through carbon sequestration.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

In this study the practical work with the EU Water Framework starts on the island of Gotland. 33 lakes and 32 streams have been characterized and classified regarding to their ecological status. The aim with the characterisation is to create a uniform discription of all waterbodies and a comparable estimation for the future. The aim with the classification is both to study the waterbodies ecological status and to gain knowledge of where the resources should be concentrated so that the ecological status in all waterbodies will be good in 2015.The characterisation has been done according to the EU Water Framework Directive, and the factors that have been applied are the mean depth and area of the lake. The length and size on the catchment area are the factors that have been used on streams.

At the Skoghall pappermill, sulphatepaper pulp is produced in a continuous digester originally from 1969. To be able to maintain a high level of production there is a need for a process with few disturbances. Variations in how well the wooden chips are packed in the digester is one form of disturbance. Today there are no available measurements on how well the chips are packed. Instead this is regarded as being constant.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.