Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

Urban trees contribute significantly to our society. By providing ecosystem services and a habitat that other urban species and ecosystems depend on, both biodiversity and the people in the city benefit. Some characteristics that the trees possess include functioning as biological filters for the atmosphere and water, as well as positively impacting people's mental health. However, urban trees are challenged by stressors such as pollution and a drier environment, making them particularly sensitive to climate change. The goal of this study was to estimate the expected magnitude of climate change in Gothenburg and compare it with the current urban species' natural climate boundaries to understand the extent of the climate threat and which species appear to be most at risk.

Serpula lacrymans infestation has become an increasingly common problem, and is usually perceived as a tip of an iceberg.During the 21st century there has been a perceived increase of damage caused by serpula lacrymans, at AB Mats Fransson Saneringstjänst ? Anticimex in the county of Kronoberg. A similar increase has also been noted by employees at the offices in Kalmar, Karlstad, Piteå, Stockholm, Malmö, Söderhamn, Halmstad and Visby.The methods used to collect data for the project has been interviews with a number, for the project, relevant key persons, such as analysis engineers at Trygghansa and Anticimex, as well as personnel at the botanical institution at Gothenburg University and the Botaniska Analysgruppen in Gothenburg, further statistics from SMHI and analyses of reported instances of infestations have been used.The majority of the people interviewed believe that the increase is caused by renovations of old houses, higher precipitation during the summer months, as well as a moister climate and warmer winters. The latter can also be gleaned from statistics from SMHI concerning temperature, precipitation, and relative humidity.Analysed damage reports show that the most common cause for the infestation is ground moisture, even when combined wooden materials.Older houses that where built around 1900 are the ones most frequently infested with serpula lacrymans. The part of the building most frequently infested is the foundation, where cellars and suspended foundation are the most common types to be infested.

The wide distribution range of our boreal pine (Pinus sylvestris L.) provides a great variation in growing conditions and climate/weather factors that influence the wood development of the trees. A great number of extensive studies have been conducted over the years in order to clarify growth trends of this and other species over more or less wide-ranging areas. In this thesis effects of weather factors were instead compared between different forest stands from the about same geographical location. The effects of precipitation, temperature and frost on the year ring characteristics of pine were studied in the research forest of Svartberget Vindeln, in northern Sweden. The stands differed in site index and silvicultural treatment; fertile ? high stem density, fertile ? low stem density, poor ? high stem density and poor ? low stem density.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

This security study attempts to explain the dynamics of international conflict management of an intrastate conflict, through a combination of three theoretical frameworks. The conflict in Syria is shown to be managed mainly through strategies using coercive diplomacy, and some main contributions within the research field relating to strategies of coercion are used for guidance, to important factors which could affect coercive international conflict management, as well as to additional theories which could enhance the study?s explanatory power through a combined theoretical framework. The two added theoretical frameworks are Power Balancing and a Multidimensional concept of Power. With the aid of analytical tools derived from this combined framework the conflict management is analysed within both a multilateral and unilateral setting, offering some explanation as to why international conflict management (practiced by UNSC multilaterally and USA unilaterally) has shown so little progress in regard to the conflict, as well as why one significant, though limited, result could be achieved regarding the destruction of the Syrian regime?s chemical weapons arsenal..

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.

Agricultural drainage is widely used to manage the amount of water in the ground in order to improve conditions for cultivation. However the effects of drainage companies on water regimes are considerable leading to runoff changes such as altered stream flows, peak flows and water levels. In a greater extent this could imply an increased risk for floods along affected watercourses. This study analyzes the extension of agricultural drainage within the drainage basin of Trosaån in Sweden by ArcGIS mapping. In a statistical analysis, historical variation in streamflow in relation to mean precipitation and mean temperature are investigated for the study area.

To reduce emissions of carbon dioxide (CO2) Carbon Capture and Storage (CCS) technologieshave been developed. Chemical Looping Combustion (CLC) is a CO2 capture technologywith the CCS framework, and at Chalmers University of Technology in Gothenburg,Sweden, a 100 kW chemical looping combustor has been built.This project aimed to investigate to what degree air can replace helium as the uidizinggas for uid dynamical studies in a CLC cold ow model of the above mentioned 100 kWfacility. Experiments were performed using air and helium separately as uidizing gas andpressure data were obtained, which formed the basis for the comparison. The project alsoaimed to investigate uid dynamics in the uidized bed and study when the risk of sluggingoccuring was greatest. The results were presented in the form of figures and tables dividedinto pressure, concentration and standard deviation of the pressure.The results obtained showed that air as uidizing gas did not create the same uid dynamicsas helium over the entire fuel reactor.