Sök:

Sökresultat:

346 Uppsatser om Cheese yield - Sida 14 av 24

Byggkostnader inom mjölkproduktionen - jämförelse av olika stallstorlekar och byggnadstekniska utföranden

Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Vilka hinder förekommer utmed gångstråk och hur kan de åtgärdas : samt hur kommunerna använt resultatet från tillgänglighetsinventeringar och hur de upplevt stödet från Vägverket Region Mälardalen

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Den skogliga informationens roll i ett kundanpassat virkesflöde : en bakgrundsstudie samt simulering av inventeringsmetoders inverkan på noggrannhet i leveransprognoser till sågverk

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

Traditional milk production in cattle in a semi-arid area in Kenya

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.

Mätramar för vederlagsmätning och timmersortering på sågverk

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

Täckning av plansilo :

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

Prissättning inom flygbranschen En kvantitativ studie av prissättningen på den västsvenska flygmarknaden

Bakgrund: Under senare år har flygbolagens prissättningsmodeller blivit allt mer invecklade. Detta har lett till att flygresenärernas möjlighet att ta hänsyn till flygbolagens prismönster har minskat. För att möta denna asymmetriska information har flera studier på den amerikanska marknaden genomförts. Samtidigt som studierna fastslår att det finns stora skillnader mellan flygbolagens prissättning, lyser bristen av dessa studier på den västsvenska marknaden med sin frånvaro. Syfte: Att öka konsumenternas förståelse för prisförändringar på den västsvenska flygmarknaden.

Deltidsbete : effekt på mjölkkornas foderintag och avkastning

Detta arbete är en litteraturstudie som handlar om hur deltidsbete påverkar mjölkkors avkastning, foderintag och välfärd. I Sverige har vi beteskrav till skillnad från många andra länder i världen. Detta skapar problem då besättningstorlekarna ökar och det blir svårare att få marker i närheten av gården att räcka till alla kor. Det största problemet med mjölkkor på bete är dock att högavkastande kor inte producerar lika mycket på bete som inne på stall. Det är därför viktigt att finna ett sätt att lösa problemen som både gynnar kon och bonden.

Societetsparken i Norrtälje : nulägesanalys och utvecklingsförslag

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Granföryngring på tallmark, hur ofta förekommer det? :

This survey was made during the summer of 2004 and the spring of 2005, on commission from the National Board of Forestry. The aim of this report was to investigate how often Norway spruce (Picea abies L. Karst), is planted on poor Scotch pine (Pinus Silvestries) sites and if it affects the yield of Norway spruce? In order to investigate this, data from 29 stands witch had a lower site index than T24 was collected. The investigated stands were situated in the southern-eastern Sweden. In 20 plots in each stand, the highest tree, age, number of seedlings, site index and tree species per stand were measured.

Har en goodwillnedskrivning någon effekt på aktieavkastningen? : En eventstudie av bolagen på Stockholmsbörsen

On 1 January 2005, IFRS (International Financial Reporting Standards)was mandatory for all listed companies within the European Union. The introduction is to create a transparent and consistent reporting. Mainly to provide companies, investors and financiers the same access to world capital markets. Since the introduction of IFRS, the goodwill value is determined by annual impairment tests. If an impairment of goodwill is a fact the goodwill decreases in value.

Relativvärdering som investeringsstrategi : En kvantitativ studie om relativvärdering inom finansbranschen i Sverige

Bakgrund: Det finns ma?nga aktier att va?lja mellan pa? aktiemarknaden. Fo?r en person som aldrig tidigare har handlat med aktier kan det vara sva?rt att veta vilken investering som efter en tid kan generera ett ho?gre va?rde a?n det satsade kapitalet. Relativva?rdering a?r en investeringsstrategi som kan tilla?mpas fo?r att identifiera dessa aktier.Syfte: Syftet med studien a?r att underso?ka om va?rdemultiplarna P/E-talet, P/BV-talet och direktavkastning kan generera o?veravkastning genom investeringar i underva?rderade aktier i finansbranschen.

Alternativa stråbränslen i växtföljden :

The purpose of this report is to find out which crops, that are good for strawfuel, and can be grown i the area around the city of Lund. The background of this report it that Lunds energy is planning to bild a biofuelheated thermal power station in Örtofta outside of Lund. I have in the report limited me to the crops hemp, whole crop (triticale), reed canary grass, elephant grass and jerusalem artichoke. I have through a documentary research checked the crops, cultivabillity in the south of Sweden, and how they should fit, in the Scanian crop sequence. Hemp is an annual crop which probably could manage in the Scanian crop sequence. Whole crop often triticale because of it´s high yield and low rate of shed seed. Could also fit into the crop sequence of crop in Scanian. Triticale is annual, and could be grown at the same kind of fields as used to wheat, whith is why it would be possible to grow it in Scania. Reed canary grass is a reedlike grass that is easy grown at most soils.

Kvickrotsstudier: 1. Kvickrotens reaktion på myllningsdjup, kvävemängd och kväveplacering i konkurrens med gröda. 2. Reducerad glyfosatanvändning på trädad åkermark :

1. Reaction on burial depth and nitrogen availability and placement in competition with a crop In this trial it was investigated how couch grass (Elymus repens) changes its ability to compete in stands of wheat and barley with different burial depth and different amounts and placement of nitrogen. More knowledge in this area can be valuable in the attempt to decrease the use of herbicides and still keep the weeds under control. The trial was carried out in the summer of 2004 as an outdoor pot experiment. The pots contained 15 litres of soil with a surface of 0,06 m2.

Matarverk för Camcoil

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

<- Föregående sida 14 Nästa sida ->