In the light of the criticism from the Swedish Consumers? Association towards the actions of modern fund managers on the Swedish Sustainable and Responsible Investment (SRI) market, discussions of change has increased. The reasons underlying a change and communication process are scarcely focused on. Thus, grounded on theories in the fields of Critical Management Studies (CSR), Corporate Social Responsibility (CSR), change and communication, this study analyses how a change of implementing revised SRI communication is carried out at Handelsbanken Asset Management, existing motives for the change in communication, and how key actors can affect the process. A participant observation and in-depth interviews were carried out enfolding a discussion that contributed with a critical analysis and discussion, concluding external motives to be dominant and that key actors of the change process are influential to a various extent.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The purpose of this essay is to analyse how the leadership and the structure of the organization affect the process of changes within a specific department in Lunds kommun socialdepartment, from the director of social work to the co-workers at Utredningsenheten för ungdom och familj. We aim to answer the following questions;How does the structure of organisation affect the process of change?What do the co-workers and the leaders believe is the best way to engage the co-workers in the change?How does the leaders view their own leadership in the process of change?How does the co-workers view the leadership in the process of change?How does the leadership affect the process of change?To develop an organisation and to make it a functional, change is a necessity. The leaders are they who create the change but the co-workers are they who make it happen. In the process of change, leadership and the leaders capacity to create motivation for the co-workers, is therefore a matter that is decisive to its success.This is a study based on a qualitative method, where the interview is the main source of empirical material.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Organizations today face changes continuously as the society, the surroundings and the technology change. The information technology used in organizations has become essential, where intranets are a big part of it. Many organizations embrace social intranets, and these kind of changes has an impact on the members in the way they work, handle information and communicate. As many organizations and the members in it face new kinds of changes, they also face new kinds of challenges. This paper presents an interview study at Smurfit Kappa Kraftliner in Piteå, whom are about to go through a change process unlike any other change they have ever gone through before.

University of VäxjöSchool of Social SciencesBachelor Thesis in Political ScienceTitle: ?Sverigedemokraternas valframgångar 2006 ? En ulv i fårakläder??Author: Emma Haraldsson and Åsa NeuschützTutor: Emil UddhammarThe aim of this study is to explain Sverigedemokraterna?s electoral success in 2006 and the essay assumes that some form of change has occurred. To study this change two hypotheses have been constructed. The first hypothesis concerns the change within Sverigedemokraterna and the second hypothesis concerns the change of the Swedish voters attitudes.Kirchheimers catch-all theory is used to explain the change in Sverigedemokraterna. The catch-all theory states that parties have to change their structure to maximise the number of votes.

AbstractThis thesis discusses ideological and rhetorical change of the Moderate Party of Sweden. The aim of the thesis has been to study the party during a time-span of almost 20 years, trying to identify changes related to each of the three party leaders.A hypothesis was developed, suggesting that the three party leaders each represented a different kind of ideology namely neo-conservatism, neo-liberalism and social liberalism. By studying newspaper articles and protocols from the Swedish Parliament, riksdagen, I was able to verify the hypothesis in all but the first party leader, Carl Bildt. It was showed that his ideology had more in common with New Right than with neo-liberalism.After identifying these changes I looked for explanations within Party Strategy Theory and Social Change Theory. My conclusions were that the changes could be understood by the great loss of voters in the election of 2002 and that agents within the Moderate Party acted upon the ambition to win new and old voters to the party, thereby recognizing the need for change.Keywords: Ideological Change, Rhetorical Change, The Moderate Party,Neo-Liberalism, Neo-Conservatism, Social Liberalism..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In connection with that the last few decades have been characterized by major changes where also the rate of change has increased, changes in organizations has become a natural part of today's organizational activities. Every change involves a learning challenge and because of that every change is unique, its output is unclear. However, there is much research that highlights various factors critical to creating an effective change, among others internal communication.The purpose of this study is to investigate whether Engeström's theory can be applied to a completed organizational change and see whether an expansive learning has been promoted in connection with this. This is accomplished through interviews with six employees, all working in one of Sweden's leading property companies. Engeström's theory of expansive learning is applied in order to analyze whether learning is promoted in connection with the organizational change.The result of the study shows that Engeström's theory can be applied to a completed organizational change in order to analyze whether an expansive learning has been promoted in connection with this.

The title: ?Klara färdiga GÅ? can be translated as ?Ready steady GO?, and is ment as a request to start move. In this project I want to invite people to walk more by creating creative, demanding and playful walkways and paths, where the body can be allowed to work just a tiny bit harder.It?s because walking means exercise and fresh air, for free and without spetial equipment. Walking can also be fun, it allows people to stop, change direction and experience things.I think activity should be fun, inspired by children playground my project is a contribution to how adults might stay healthier in a city, where too often healthy activity is solely confined to the gym or sports fields.

In this thesis the subject innovation and the change of meaning is in focus. The purpose of the study is to present a new dimension of innovation as a change of meaning together with the cases we?ve studied. It is discussed throughout the article if theories of perception and association can affect the organization and its ability to create meaning-changing innovations. The industrial robotics is a market in need of, perhaps, if not other markets but of finding new ground that results in the change of meaning.