During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

The purpose of this paper is to examine the correlation between hotels, their brands and the frontline staff within the industry. A competitive, international environment characterizes today´s hotel industry where brands are one of the strongest sources for a successful position amongst competitors. In the brand delivery, the front line staff is of utmost importance since they in many ways incorporate the brand values and the projected identity of the hotel. Hotels can use a variety of ways to communicate the brands identity to the front line staff in order to create the desired brand behavior, some more effective than others. At the same time the Swedish hotel industry, as many other, is characterized by a high percentage of staff turnovers.

This paper aims to investigate whether a small organization with small development teams can find a value in leaving a functioning development process to follow a formal systems development methodology, if these organizations can find support in an agile systems development method and in such case the method needs to be adjusted according to the organizations unique conditions.A traditional plan-driven system development methodology includes a number of phases that are carried out sequentially and a completed phase can basically not be resumed. All requirements are specified at the beginning of a project and at the end of the project only one delivery of software take place. This can cause difficulties in for example dealing with changing requirements. Agile system development methods intend to deal with changing requirements and to enable continuous delivery of valuable, working software.In this paper, both the traditional plan-driven methods and agile methods will be explained. Research methodology and existing system development theories will be discussed and a company where the study has been conducted will be presented.

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

This Master?s thesis examines the discussions about the new Swedish legal deposit legislation for electronicdocuments, related to Jürgen Habermas? theories around the public sphere.In 2009, a draft of the law proposal was sent out to various authorities and organizations who were asked tocontribute their views on this matter. This study looks at who has responded of those asked, and what commonviews are apparent within these responses. The responses from two different categories are focused on ?universities and other authorities, examining if any similarities or differences can be noticed in the arguments inthe different categories? responses to the proposed law change.This information has been first analyzed through content analysis, providing an overview to the respondentsof the draft, and the different views which have arisen.

Background: Sphincter injury is serious complication in connection to vaginal childbirth. Desire to avoid vaginal birth again is seen in women who previously suffered from a sphincter injury.Objective: To identify and evaluate obstetric guidelines in Sweden regarding sphincter injury in relation to childbirthMethod: Content analysis with a combination of a deductive and inductive approach.Results: The most frequently occurring risk factors and prevention with help of perineal protection were described in the guidelines. The physician made diagnosis and repaired the sphincter injury at the theatre.  Complications such as coital pain and anal incontinence were described in the guidelines. Paracetamol and diclofenac was most common analgesic regimen given for pain.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Internet commerce is nowadays a well known phenomenon. There is awareness that a lot of newly created companies operate their business through the Internet. You can see a tendency where many young people try to establish an Internet business with the hope of success and expansion on today?s fierce market rivalry. To achieve success, companies have to consider factors like business concept, logistic knowledge, future vision, resources and contacts when initializing their business.Having this in mind, we can clarify the purpose with this paper: ?To analyze in what way On-line shopping companies that sell consumer electronics, cell phones and music/entertainment products, have expanded? The paper is based on telephone interviews with three On-line shopping companies.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.