Hemp is an old agricultural plant and has been used for hundreds of years for making textiles, ropes and other fibre products. In the middle of the last century the Swedish government prohibited all growing of hemp. Natural fibres were replaced by syntetic fibres instead. Today there is a newly awakened interest for using natural fibres from renewable materials. Growing of industrial hemp for fiber is allowed in Sweden again. I want in my Paper give Swedish growers an insight of which harvesting methods that have been tried in Sweden and how they worked.

The aim of this paper was to explain protein degradation in silage and protein quality and biogenic amines in silage and their effects on the health of the dairy cows. After harvest-ing, the plant proteases degrade the proteins in the plant. The protein degrades to different fractions with different digestibilites in the rumen. Fraction A contains non- protein nitro-gen which is peptides, free amino acids and amines. True protein is in the fraction B and is further divided into three subfractions depending on their solubility.

During an endurance riding competition the onset of metabolic disorders leading up to elimination from the race are common. As many as 8,7 % of the horses participating in international endurance riding competitions are eliminated due to metabolic causes such as tachycardia, absence of borborygmi, hyperthermia and dehydration. To prevent the onset of metabolic disorders in the horse the rider must be able to determine the physiological and physical status of his or her horse. This requires good knowledge in nutrition, physiology and performance training. The risk of developing metabolic problems is reduced through the right feeding management and training.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.

Lining techniques such as nap bonding and mist lining were developed in the late 20th century and have gained popularity alongside with the increased use of acrylic emulsions as adhesives. The ability of the adhesive to create a nap bond to the canvases without penetrating the fibers has shown advantages regarding reversibility. In addition, the use of moisture, heat and pressure is reduced, which can be advantageous for more sensitive paintings. These lining techniques have been included in several studies where reversibility, minimal intervention and respect for the individual requirements and problems of each object have been the focus. The adaptability of the methods has been confirmed and to further explore the adaptability, this study consists of three simpler application techniques with the adhesive Lascaux 303 HV on mockups.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Pomace is the solid remains (i.e. stems, pulp, seeds, and skins) after pressing for juice. The annual production of apple pomace is 593 000 ton worldwide. Its field of application depends on local conditions. In order to investigate the field of application of apple pomace in the Southern Sweden, six persons on companies with production of apple juice were interviewed.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

I takt med att vi förbrukar samhällets resurser så ökar intresset för att ersätta oljebaserade material med likvärdiga baserade på cellulosa. Det forskas mycket kring nya cellulosabaserade material och dess egenskaper, och det presenteras även nya material som är mer eller mindre färdiga för produktion. Vid en produkts utveckling och framställning finns det ett stort antal olika material tillhands att välja ibland. De traditionella och etablerade materialen är väl undersökta och deras egen skaper är välkända och väl dokumenterade, men så är inte alltid fallet med nya material som kommer fram från forskningen. En uppfattning är att det kan vara svårt att få ett material att gå från att vara ett intressant, nytt material till att det faktiskt hittar sin väg in till en produktion eller till att ingå i en produkt.Syftet med arbetet är att det ska vara till hjälp för de personer som är involverade i ett materials framtagande i förståelsen av om vad intressenter efterfrågar från ett nytt material.

Textiles are made in an unsustainable way and there is a need to find alternative ways and material to reduce the negative impacts on the environment, humans and animals. Problems like pollution, excessive water consumption and loss of soil fertility is a result of this lack of diversity. It is a necessity to find innovative alternatives in other fabrics due to the unsustainable use of cotton and polyester fibers. As in many other countries in the Western part of the world, in Sweden there is a rapid turnover and increased selling of clothes that result in increased textile waste. About 15 kilogram of textiles (net inflow) is consumed per person each year.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

Denna rapport beskriver en produktutvecklingsprocess som behandlar utvecklandet av ett textilt material som isolerar och skyddar. Det textila materialet ska fungera till ett kylande fodral utan att förstöra dess funktion och behöver därför uppfylla en speciell kravspecifikation. Materialet ska isolera mot kroppsvärme, vara stabilt, skyddande och slitstarkt. Dubbelväv valdes tidigt i arbetet då det är ett enkelt sätt att kunna påverka det textila materialets egenskaper i form av material- och konstruktionsval, i en betydligt större utsträckning än i en enkelsidig väv. För att utveckla ett material med de efterfrågade egenskaperna har tester utförs och den metod som har använts är hypotesprövning.